61795
38
Zoom out
Zoom in
Previous page
1/102
Next page
Thank you for purchasing an Olympus
Digital Voice Recorder.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we
recommend that you test the record function
and volume before use.
EN
DIGITAL VOICE
RECORDER
WS-331M
WS-321M
WS-311M
INSTRUCTIONS
INSTRUCTIONS
2
Trademarks
IBM and PC/AT are the trademarks or registered trademarks of International Business
Machines Corporation.
Microsoft, Windows and Windows Media are registered trademarks of Microsoft Corporation.
WOW XT, SRS and
symbol are trademarks of SRS Labs, Inc.
WOW XT technology is incorporated under license from SRS Labs, Inc.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
The product was developed based on noise-canceling technology under license from NEC
Corporation.
Other product and brand names mentioned herein may be the trademarks or registered
trademarks of their respective owners.
Introduction
The contents of this document may be changed in the future without advanced notice.
Contact our Customer Support Center for the latest information relating to product
names and model numbers.
The utmost care has been taken to ensure the integrity of the contents of this document.
In the unlikely event that a questionable item, error, or omission is found, please contact
our Customer Support Center.
Any liability for passive damages or damage of any kind occurred due to data loss
incurred by a defect of the product, repair performed by the third party other than
Olympus or an Olympus authorized service station, or any other reasons is excluded
from the Olympus’s liability.
3
1
2
6
3
5
7
4
INDEX
Table of Contents P.4
Safe and Proper Usage P.6
Getting Started P.8
When Using the Recorder as a Voice Recorder P.19
Using the Recorder on Your PC P.44
Using the Recorder as a Music Player P.48
P.72
Other Practical Use Methods P.94
Other Information P.95
Feature Common to the Voice Recorder
and Music Player
4
Introduction .............................................. 2
INDEX ...................................................... 3
Table of Contents .................................... 4
Safe and Proper Usage ........................... 6
General Precautions................................ 6
1 Getting Started
Main Features .......................................... 8
Identification of Parts ............................. 10
Inserting Battery .................................... 12
Power Supply ........................................ 13
VOICE Mode and MUSIC Mode ........... 14
Setting Time/Date (Time & Date) .......... 17
2 When Using the Recorder as a
Voice Recorder
Recording .............................................. 19
Using the Variable Control
Voice Actuator (VCVA) .................... 22
Recording Modes (Rec Mode) .............. 24
Microphone Sensitivity (Mic Sense) ...... 25
Set the Low Cut Filter (Low Cut Filter) .... 26
Recording from External Microphone
or Other Devices ............................. 28
Playing ................................................... 30
Noise Cancel Function (Noise Cancel) ... 34
Set the Voice Filter (Voice Filter) .......... 36
Continuous Playback (All Play) ............. 38
Locking Files (Lock) .............................. 40
Menu List (VOICE Mode) ...................... 42
3 Using the Recorder on Your PC
Saving Files in Your PC ......................... 44
Operating Environment ......................... 45
Connecting to Your PC .......................... 46
4 Using the Recorder as a
Music Player
Using the Recorder as a Music Player .... 48
Using Windows Media Player ............... 48
Importing Content for Listening on the
Recorder .......................................... 49
Window Names ..................................... 50
Copying Music from CD ........................ 51
Table of Contents
5
Transferring Music File to the Recorder...... 52
Music Playback...................................... 55
Select Play Mode (Play Mode) .............. 59
Random Playback (Random) ................ 61
Increasing the WOW Effect (WOW)...... 63
Selecting Equalizer (EQ) ....................... 66
Moving the Tracks (Move) ..................... 68
Menu List (MUSIC Mode) ...................... 70
5 Feature Common to the Voice
Recorder and Music Player
Erasing ................................................... 72
Hold........................................................ 75
Index Marks and Temp Marks ............... 76
How to Begin Segment Repeat Playback ...
78
Menu Setting Method ............................ 80
Auto Backspace Review (Back Space) ... 82
Changing the Playback Speed
(Play Speed) ................................... 84
System Sounds (Beep) ......................... 87
Backlight (Backlight) .............................. 88
LCD Contrast Adjustment (Contrast) .... 89
LED (LED) ............................................. 90
Formatting the Recorder (Format) ........ 91
Viewing System Information
(System Info.) .................................. 93
6 Other Practical Use Methods
Using as External Memory
of the Computer ............................. 94
7 Other Information
Alarm Message List ............................... 95
Troubleshooting ..................................... 96
Accessories (Optional) .......................... 97
Specifications ........................................ 98
Technical Assistance and Support ...... 100
Table of Contents
6
Safe and Proper
Usage
Before using your new recorder, read this
manual carefully to ensure that you know
how to operate it safely and correctly.
Keep this manual in an easily accessible
location for future reference.
The warning symbols indicate important safety
related information. To protect yourself and others
from personal injury or damage to property, it is
essential that you always read the warnings and
information provided.
General Precautions
Do not leave the recorder in hot,
humid locations such as inside a
closed automobile under direct
sunlight or on the beach in the
summer.
Do not store the recorder in places
exposed to excessive moisture or
dust.
Do not use organic solvents such as
alcohol and lacquer thinner to clean
the unit.
Do not place the recorder on top of
or near electric appliances such as
TVs or refrigerators.
Avoid recording or playing back near
cellular phones or other wireless
equipment, as they may cause
interference and noise. If you
experience noise, move to another
place, or move the recorder further
away from such equipment.
Avoid sand or dirt. These can cause
irreparable damage.
Avoid strong vibrations or shocks.
Do not disassemble, repair or modify
the unit yourself.
7
General Precautions
Do not operate the unit while
operating a vehicle (such as a
bicycle, motorcycle, or go-cart).
Keep the unit out of the reach of
children.
<Warning regarding data loss>
Recorded content in memory may be
destroyed or erased by operating
mistakes, unit malfunction, or during
repair work.
It is recommended to back up and save
important content to other media such as
a computer hard disk.
Any liability for passive damages or
damage of any kind occurred due to data
loss incurred by a defect of the product,
repair performed by the third party other
than Olympus or an Olympus authorized
service station, or any other reasons is
excluded from the Olympus’s liability.
Batteries
Warning
Batteries should never be exposed to
flame, heated, short-circuited or
disassembled.
Do not attempt to recharge alkaline,
lithium or any other non-rechargeable
batteries.
•Never use any battery with a torn or
cracked outer cover.
•Keep batteries out of the reach of
children.
If you notice anything unusual when
using this product such as abnormal
noise, heat, smoke, or a burning odor:
1 remove the batteries immediately
while being careful not to burn
yourself, and;
2 call your dealer or local Olympus
representative for service.
8
1
Main Features
Getting Started
Main Features
This product can be used to record meetings or notes, for use in conferences and other
business settings, and for language studies. It can also be used as a digital music player.
This recorder features a two-part design. The battery compartment separates from the main
unit to expose a USB terminal, for direct connection to your PC.
Main Features of the Digital
Voice Recorder
The recorder stores highly compressed
WMA (Windows Media Audio) format voice
messages in integrated flash memory. (
P. 19)
It can also play back WMA and MP3
(MPEG-1/MPEG-2 Audio Layer-3) format
files. ( P. 30)
It has a built-in Variable Control Voice
Actuator (VCVA) function. ( P. 22)
The Low Cut Filter minimizes air conditioner
noise and other similar noises while recording.
( P. 26)
A Noise Cancel function ( P. 34) and a Voice Filter
function ( P. 36) cut noise and enable clear audio playback.
Stereo
microphone
Noise-Cancellation
monaural microphone
Telephone
pickup
Tie clip microphone
External Microphone
(optional) P. 97
Recording modes WS-331M (2GB) WS-321M (1GB) WS-311M (512MB)
ST XQ 35 hours 30 minutes 17 hours 40 minutes 8 hours 45 minutes
ST HQ 71 hours 00 minutes 35 hours 25 minutes 17 hours 40 minutes
ST SP 142 hours 05 minutes 70 hours 55 minutes 35 hours 25 minutes
HQ 142 hours 05 minutes 70 hours 55 minutes 35 hours 25 minutes
SP 279 hours 35 minutes 139 hours 40 minutes 69 hours 40 minutes
LP 555 hours 45 minutes 277 hours 35 minutes 138 hours 30 minutes
Available recording time may be shorter if many short recordings are made. (The displayed available recording time
and recorded time are approximate indications.)
You can choose one of three stereo or three monaural recording modes. ( P. 24)
Recording time:
9
1
Main Features
It has a backlight full-dot display (LCD
display screen). ( P. 11)
It features various repeat functions.
( P. 59, P. 78)
Index mark and temp mark features
allow you to quickly find desired
locations. ( P. 76)
The playback speed can be controlled
as preferred. ( P. 84)
Connecting this recorder directly to the USB port
links up with your PC. The data can be transferred
or saved without USB cable or driver software. (
P. 46)
This recorder is compatible with USB 2.0, enabling fast
data transfer to a computer.
This USB storage class support recorder can be
utilized as external memory to read and save the
data. ( P. 94)
By connecting the computer with the USB, pictures, text
data, etc. can be saved, and utilized to carry data.
Main Features
Ni-MH
rechargeable
battery and charger
set (optional)
P. 97
Main Features of the Digital Music Player
You can play back music files in WMA and MP3 format. ( P. 55)
The WS-331M can hold about 500 songs; the WS-321M about 250, and
the WS-311M about 125. (at 128 kbps, 4 minutes per song)
It has built-in WOW XT. ( P. 63)
You can change the playback equalizer settings. ( P. 66)
10
1
1 EAR (Earphone) jack
2 MIC (Microphone) jack
3 Built-in stereo microphone (R)
4 REC (Record) button
5 STOP button
6 PLAY button
7 Built-in speaker
8 USB terminal
9 VOL (+) button
0 9 button
! VOL (–) button
@ FOLDER/INDEX button
# ERASE button
$ OK/MENU button
% 0 button
^ Display (LCD panel)
& Record/Play indicator light
* Built-in stereo microphone (L)
( USB access indicator light
) Strap hole
- HOLD switch
= Mode (VOICE/MUSIC) switch
q RELEASE (Release) button
w Battery cover
Identification of Parts
4
3
9
0
!
@
#
^
w
&
*
$
%
5
6
7
8
1
2
(
=
-
)
q
Main unit
Battery
compartment
Identification of Parts
11
1
Identification of Parts
Display (LCD Panel)
VOICE mode display MUSIC mode display
1 Folder indicator
2 VCVA (Variable Control Voice
Actuator) indicator
3 Record mode indicator
4 Character information display
5 Microphone sensitivity indicator
6 Erase lock indicator
7 Low Cut Filter indicator
8 Playback effect indicator
9 Battery indicator
0 Current file number
! Total number of recorded files
in the folder
@ Memory remaining indicator (E/
F bar)
# Title and artist name indicator
$ Play position bar indicator
0Music 1/36
SONG A/Artist
S
A
$
4
9
#
8
0!1
120
120
HQ
E F
S
@
9
!
0
1
2
3
4
8
765
Identification of Parts
12
1
A
B
1
2
3
Inserting Battery
1
Lightly press down on the arrow and slide the
battery cover open.
2
Insert size-AAA alkaline battery, observing the
correct polarity.
3
Close the battery cover completely by pressing to
the direction A, then sliding to the direction B.
If the “hour” indicator flashes in the display, see “Setting Time/
Date (Time & Date)” ( P. 17).
Replacing the Battery
The battery indicator on the display changes as the battery
loses power.
When appears on the display, replace the battery as soon
as possible.
When the battery is too weak, “Battery Low” appears on the
display and the recorder shuts down. When changing battery, AAA
alkaline battery or Olympus Ni-MH battery is recommended.
Optional Ni-MH rechargeable batteries from Olympus can be
used for the recorder. Use them with the BU-400 Olympus Ni-
MH Rechargeable Battery Charger (Europe only) ( P. 97).
Ni-MH Rechargeable Battery
..................................................................................................................................................
Notes
Manganese battery may not be used in this recorder.
Be sure to stop the recorder before replacing the battery. Unloading the battery while the recorder
is in use may corrupt the file. If you are recording into a file and the battery runs out, you will lose your
currently recorded file because the file header will not be able to close. It is crucial to change the battery
once you see only one hash mark in the battery indicator.
If it takes longer than 15 minutes to replace the dead battery or if you take the battery in and out
repeatedly at short intervals, you may have to reset the time when you have loaded a fresh battery.
Remove the battery if you are not going to use the recorder for an extended period of time.
When playing a voice/music file, the recorder may be reset due to the reduction of the voltage output of
the battery depending on the volume level even if
is displayed in the battery indicator. In this case,
lower the volume of the recorder.
Inserting Battery
13
1
Turning On the Power
Slide the HOLD switch in the direction opposite
that indicated by the arrow.
The display will turn on and the power will be turned on.
The resume function will bring the recorder back to the stop
position in memory before power was turned off.
Turning Off the Power
Slide the HOLD switch in the
direction indicated by the
arrow while the recorder is not
in operation.
The display shuts off and the power
will be turned off.
The resume function remembers the
stop position before the power is
turned off.
Hold
Power Supply
If the recorder is stopped/not used for over 5 minutes
after it is turned on, it goes into standby (power-save)
mode, and the display shuts off. To exit standby mode
and turn on the display, press any button.
Standby Mode and Display Shut Off
When the recorder is not being used, turn the power off to reduce battery consumption to a
minimum. Even if the power is turned off, existing data, mode settings, and clock settings will
be maintained.
Power Supply
14
1
VOICE Mode and MUSIC Mode
This device can be used as a voice recorder or as a music player. For recording and playing
back voice recordings, set the mode switch to VOICE. For listening to music, set the mode
switch to MUSIC.
WS
330001.
WMA
VOICE Mode
Slide the mode switch to the VOICE position.
The recorder provides five folders, named
A
through
E
, for
storing audio data. The files like recorded audio or language
files transferred from a PC, are stored in these folders as
individual files. Up to 200 files can be saved in each folder.
File names will be automatically created for files recorded by
this recorder.
Extension
File number: A serial number automatically assigned by
a Digital Voice Recorder.
User ID: The name that has been set on the Digital Voice
Recorder.
001/12
01.
WMA
/ 5
M 24D A
M
WS
330002.
WMA
WS
330003.
WMA
WS
330004.
WMA
00
01
1
18
M
M
05
2
0
0 0
HQ
S
S
List display
Current folder and files recorded in this folder are
displayed.
File display
Information of the selected file is
displayed.
Current folder
Scroll bar (appears when
the whole contents cannot
be displayed.)
File being selected (The file name will be highlighted,
and the file name, and date and time the file was
recorded, will scroll across the screen once.)
Current
folder
File
length
VOICE Mode and MUSIC Mode
15
1
VOICE Mode and MUSIC Mode
MUSIC Mode
Slide the mode switch to the MUSIC position.
This recorder can save the music files (WMA, MP3 files)
transferred from the PC in the 2 music folders, the original “Root”
folder and its subsidiary “Music” folder.
Also, this recorder can create the folders in up to 2 layers within
the “Music” folder. It is convenient to manage the multiple albums
with the same artist name. Up to 200 files can be saved in each
folder.
Root
Music
Artist A
Artist B
Artist C
Album 1
Album 2
001
002
200
A
Folder
File
Music File A
Music File B
Music File C
Music File D
Music File E
Music File F
Music File G
First layer Second layer
Save up to 200
files.
..................................................................................................................................................
Notes
Up to 128 folders including “Root” and “Music” folders can be operated on this recorder.
When using Windows Media Player 10, click [Start Sync] instead of setting the synchronization options. All
the files will be transferred to the part A above ( P. 52).
VOICE Mode and MUSIC Mode
16
1
M
usic
SONG A.wma
SONG B.wma
SONG C.wma
R
oot
M
usic
SONG A.wma
SONG B.wma
SONG C.wma
R
oot
Best
SONG K.wma
SONG
L
.wma
SONG
M
.wma
A
rtist
B
SONG
N
.wma
SONG O.wma
SONG
P
.wma
SONG Q.wma
B
est
A
rtist
A
A
rtist
B
A
rtist
C
SONG D.wma
M
usic
Album1
Album2
SONG E.wma
SONG
F
.wma
A
rtist
A
SONG G.wma
SONG H.wma
SONG I .wma
SONG J.wma
Album1 Album1
01/11
SONG G / A
rtist
A
05320000
A
rtist
A
A
rtist
B
A
rtist
C
SONG D.wma
M
usic
B
est
01/16
SONG N / A
rtist
B
04350000
M
usic
SONG A.wma
SONG B.wma
SONG C.wma
R
oot
R
oot
01/06
SONG B
03480000
Fld
Fld
Fld
Pressing the OK button will play the
selected file.
Meaning of Icons in this Manual
Set the mode switch to VOICE before operating the recorder.
Set the mode switch to MUSIC before operating the recorder.
Convenient features that can be used with both the Voice Recorder and
Music Player.
VOICE Mode and MUSIC Mode
How to Select a File
Current folder Folder being selected File being selected
Title (name of the file)/Artist
Current file number/Total number of recorded files in the folder
9 or OK button: Opens the selected folder/file.
FOLDER button: Returns to the folder in the higher
level and shows the list display.
+
or
button: Moves the cursor up and down.
VOICE Mode and MUSIC Mode
17
1
1
Press the 9 or 0 button to
select the item to set.
Select the item from “hour”, “minute”,
“year” “month” and “day” with a flashing
point.
2
Press the + or
button to set.
Follow the same steps by pressing the
9 or 0 button to select the next item,
and press the + or – button to set.
•You can choose between 12 and 24 hour display by pressing
the FOLDER button while setting the hour and minute.
Example: 10:38 P.M.
10:38 PM 22:38
(Initial setting)
•You can choose the order of the year, month, day by pressing
the FOLDER button while setting them.
Example: January 7, 2007
1
2
1
M
7
D
2007
Y
4
:
38
PM
Time & Date
1
M
7
D
2007
Y
:
38
PM
10
Time & Date
Setting Time/Date (Time & Date)
If you set the date and time beforehand, the information when the file is recorded is
automatically stored for each file. Setting the date and time beforehand enables easier file
management.
The hour indicator will flash automatically when you load a battery
before using the recorder for the first time, or after the recorder hasn’t
been used for a long time. Proceed from step 1.
et
Time&M
Da t e
S
Setting Time/Date (Time & Date)
1M 7D 2007Y
(Initial setting)
7
D 1M 2007Y 2007Y 1M 7D
18
1
1
While the recorder is stopped, press the MENU button
for 1 second or longer.
The “Menu” screen opens ( P. 42).
2
Press the + or
button to choose
“Sub Menu”.
3
Press the OK or 9 button.
4
Press the + or
button to choose
“Time & Date”.
5
Press the OK or 9 button.
The hour indicator flashes, indicating the
start of the Time/Date setup process.
The following steps are the same as Step 1
through Step 4 of “Setting Time/Date (Time
& Date)” ( P. 17).
4
3
3
1
2
5
4
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
ub MenuS
Lock
Time & Date
Format
System
Setting Time/Date (Time & Date)
3
Press the OK button to complete the setup screen.
The clock will start from the set date and time. Press the OK button
according to the time signal.
4
Press the STOP button to close the menu.
.........................................................................................................
Note
If you press the OK button during the setup operation, the recorder will save
the items that were set to that point.
Changing the Time/Date
Press and hold the STOP button while this recorder is in stop mode to display the “Time &
Date”. If the “Time & Date” is not correct, set it using the procedure below.
Setting Time/Date (Time & Date)
19
2
1
Press the FOLDER button to
choose a folder in which to make
a recording.
Every time the FOLDER button is pressed,
folders will switch.
a Current folder
2
Press the REC button to start
recording.
The record/play indicator light glows red.
Turn the built-in stereo microphone in the
direction to be recorded.
The display changes depending on the
recording mode ( P. 24).
b Current recording mode
c Recording elapsed time
d Memory remaining indicator (E/F bar)
(the bar indicates remaining memory)
e Level meter (varies according to the sound
volume being recorded)
Every time the OK button is pressed
while recording, “Recording elapsed
time” and “Remaining recording time”
cycles in the location indicated by c.
3
Press the STOP button to stop
recording.
120
120
R
L
E F
HQ
35
M
12
S
b
c
e
d
120
120
E F
HQ
35
M
12
S
b
c
e
d
1
3
2
901/11
WS
330001.
WMA
/ 5
WS
330002.
WMA
WS
330003.
WMA
WS
330004.
WMA
a
Recording
Before starting recording, select a folder between Folder
A
to Folder
E
.These five folders
can be selectively used to distinguish the kind of recording; for example, Folder
A
might be
used to store private information, while Folder
B
might be dedicated to holding business
information.
Newly recorded audio will be saved as the last file in the selected folder.
When Using the Recorder as a Voice Recorder
Display in the monaural
recording mode
Display in the stereo
recording mode
Recording
20
2
Notes
•To ensure recording from the beginning, start speaking after you see the red record/play indicator light on.
•A beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10 seconds
while recording.
When remaining recording time is less than 60 seconds, the record/play indicator light starts flashing in
red. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
“Memory Full” or “Folder Full” will be displayed when the memory or folder capacity is full. Delete any
unnecessary files before recording any further ( P. 72).
If the REC button is pressed while the mode switch is set to MUSIC, “Music Mode” will flash on the
screen. Set the mode switch to VOICE before recording ( P. 14).
Pause
Press the REC button while recording.
“Rec Pause” will flash on the display.
The recorder will time out after 1 hour when
left in “Rec Pause”.
Resume Recording
Press the REC button again.
Recording will resume at the point of
interruption.
120
120
E F
Rec Pause
35
M
12
S
HQ
120
120
R
L
E F
HQ
35
M
13
S
Recording
Recording
21
2
Listening While Audio is Recorded
If you start recording after inserting the earphone into the EAR jack
on the recorder, you can hear the sound being recorded. The sound
volume on the recording monitor can be adjusted by pressing the
VOL (+) or VOL (–) button.
Connect the earphone to the EAR jack on the recorder.
After recording has started, you can hear the sound being
recorded through the earphone. If the earphone is connected,
no sound will come from the speaker.
............................................................................................................
Notes
Recording level cannot be controlled using the volume button.
When using the earphones, do NOT set the volume too high. Listening at
very high volume may lead to hearing loss.
Do not place earphones near a microphone as this may cause feedback.
To EAR
(earphone)
jack
Recording
Recording
22
2
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42).
2
Press the OK or 9 button.
The “Rec Menu” screen opens.
3
Press the + or
button to choose
“VCVA”.
4
Press the OK or 9 button.
The VCVA setup process begins.
5
Press the + or
button to choose
between “On” and “Off”.
On: Will start recording in VCVA mode.
Off: Will resume recording in normal mode.
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Rec Menu” screen.
Using the Variable Control Voice
Actuator (VCVA)
When the microphone senses that sounds have reached a preset threshold volume level, the
built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when
the volume drops below the threshold level.
The VCVA feature extends recording time and conserves memory by stopping recording
during silent periods, which helps the playback to be more efficient.
2
1
4
3
6
5
Rec Mode
Mic Sense
VCVA
Low Cut Filter
ec MenuR
On
O
ff
CVAV
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
Using the Variable Control Voice Actuator (VCVA)
23
2
7
Press the STOP button to close the
menu.
If it is set to “On”, will appear on the
display.
a VCVA (Variable Control Voice Actuator)
indicator
8
Press the REC button to start
recording.
When the sound volume is lower than the
preset threshold sound level, recording
automatically stops after 1 sec approximately,
and “Standby” flashes on the display. The
record/play indicator light glows red when
recording starts and flashes when recording
pauses.
9
Press the 9 or 0 button adjust
the pause sound level.
The VCVA level can be set to any of 15
different values. The higher the value, the
more sensitive the recorder to sounds. At
the highest value, even the faintest sound
will activate recording.
The VCVA pause sound level can be
adjusted according to the ambient
(background) noise.
b Level meter (varies according to the sound volume being recorded)
c Start level (moves to the right/left according to the set level)
Using the Variable Control Voice Actuator (VCVA)
..................................................................................................................................................
Notes
The start/stop actuation level also varies depending on the selected microphone sensitivity mode ( P. 25).
If the starting level is not adjusted within 2 seconds, the display will return to the previous.
If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the
recording situation.
•To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is
recommended.
7
8
9
120
1
1
H 27M53S
20
HQ
00
M
00
S
a
121
121
R
L
E F
Standby
HQ
121
121
R
L
E F
02
VCVA Level
HQ
c
b
Using the Variable Control Voice Actuator (VCVA)
24
2
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42).
2
Press the OK or 9 button.
The “Rec Menu” screen opens.
3
Press the OK or 9 button.
The recording mode setup process
begins.
4
Press the + or
button to select
the recording mode.
5
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Rec Menu” screen.
6
Press the STOP button to close the
menu.
a Record mode indicator
Press and hold the STOP button while the
recorder is stopped to check “Remaining
Memory” and “Remaining Recording Time” in
the selected recording mode.
120
1
1
H 27M53S
20
HQ
00
M
00
S
a
2
1
3
4
6
5
Rec Mode
Mic Sense
VCVA
Low Cut Filter
ec MenuR
HQ
ec ModeR
ST XQ
ST HQ
ST SP
Recording Modes (Rec Mode)
The recording mode can be chosen from ST XQ (stereo extra high quality sound recording),
ST HQ (stereo high quality sound recording), ST SP (stereo standard recording), HQ (high
quality sound recording), SP (standard recording), and LP (long-term recording).
..................................................................................................................................................
Notes
When a meeting and lecture is to be recorded clearly, set other than LP mode to record.
When an external monaural microphone is used while the recorder is set to ST XQ, ST HQ, or ST SP
mode, audio will be recorded to the L channel only.
Recording Modes (Rec Mode)
25
2
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42).
2
Press the OK or 9 button.
The “Rec Menu” screen opens.
3
Press the + or
button to choose
“Mic Sense”.
4
Press the OK or 9 button.
The microphone sensitivity setup process
begins.
5
Press the + or
button to choose
between “Conf and “Dict”.
Conf: High-sensitivity mode that records
sounds in all directions.
Dict: Low-sensitivity mode suited for
dictation.
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Rec Menu” screen.
7
Press the STOP button to close the
menu.
a Microphone sensitivity indicator
2
1
3
5
4
7
6
Dic
Mic Sense
t
Con f
Rec Mode
Mic Sense
VCVA
Low Cut Filter
ec MenuR
120
1
1
H 27M53S
20
HQ
00
M
00
S
a
Microphone Sensitivity (Mic Sense)
Microphone sensitivity is adjustable to meet recording needs.
..................................................................................................................................................
Note
When the speaker’s voice is to be recorded clearly, set to Dict (dictation) mode and move the built-in
stereo microphone close to the speaker’s mouth (5 to 10 cm / 2 to 4 inches) and record.
Microphone Sensitivity (Mic Sense)
26
2
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42).
2
Press the OK or 9 button.
The “Rec Menu” screen opens.
3
Press the + or
button to choose
“Low Cut Filter”.
4
Press the OK or 9 button.
The Low Cut Filter setup process begins.
5
Press the + or
button to choose
between “On” and “Off”.
On: Low Cut Filter will be turned on.
Off: Low Cut Filter will be canceled.
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Rec Menu” screen.
7
Press the STOP button to close the
menu.
If it is set to “On”, will appear on the
display.
a Low Cut Filter indicator
The recorder has a Low Cut Filter function to minimize low-frequency sounds and record
voices more clearly. This function can reduce noise from air conditioners, projectors and
other similar noises.
Set the Low Cut Filter (Low Cut Filter)
2
1
3
5
4
On
O
ff
Low Cut Filter
Rec Mode
Mic Sense
VCVA
Low Cut Filter
ec MenuR
120
1
1
H 27M53S
20
HQ
00
M
00
S
a
Set the Low Cut Filter (Low Cut Filter)
7
6
27
2
ST XQ
ST XQ, ST HQ, ST SP
ST XQ, ST HQ, HQ
ST XQ
Recommended Settings by Recording Condition
Recording condition
Conferences with large crowds and
lectures in large rooms.
Meetings and business negotiations with
a small number of people.
Dictation with a lot of background noise.
Music playing, wild birds singing, and
railway sounds.
Dictation in a quiet environment.
Recommended settings
Recording Mode
Microphone
Sensitivity
Low Cut
Filter
Dict
Conf
On
Off
Microphone
Sensitivity
There is no particular recommendation. Choose a setting
for recording.
Set the microphone sensitivity according to the volume being recorded.
Set the Low Cut Filter (Low Cut Filter)
Set the Low Cut Filter (Low Cut Filter)
28
2
Recording with External Microphone
Connect the external microphone to the microphone
jack of the recorder.
When the external microphone is connected to the microphone
jack of the recorder, the built-in microphone will not operate.
Applicable External Microphones (optional)
Stereo microphone: ME51S
The built-in large-diameter microphone enables sensitive stereo
recording. Stereo recording is available only in ST XQ, ST HQ or ST SP
modes.
Highly sensitive noise-cancellation monaural microphone:
ME52
This microphone is used to record sound at a distance while minimizing
surrounding noise.
Noise-Cancellation monaural microphone: ME12
(Dictation microphone)
Used to get clear recordings of your own voice by reducing the effects of
ambient noise.
Tie clip microphone: ME15 (Monaural)
Small concealing microphone with a tie-clip.
Telephone pickup: TP7 (Monaural)
Earphone type microphone can be plugged into your ear while phoning.
The voice or conversation over the phone can be clearly recorded.
Recording from External Microphone
or Other Devices
To MIC
(microphone) jack
Recording from External Microphone or Other Devices
29
2
V
O
L
U
M
E
EAR
ME
EAR
Recording the Sound of Other
Devices with this Recorder
The sound can be recorded when connecting to
the audio output terminal (earphone jack) of the
other device, and the microphone jack of the
recorder with the connecting cord (optional
KA333) ( P. 97) for dubbing.
Recording the Sound of this
Recorder with Other Devices
The sound of this recorder can be recorded to
other devices when connected to the audio input
terminal (microphone jack) of other devices and
the earphone jack of this recorder, with the
connecting cord (optional KA333) for dubbing.
To MIC
(microphone)
jack
To audio output
terminal of other
devices
To audio input
terminal of
other devices
To EAR
(earphone) jack
..................................................................................................................................................
Notes
Use the connecting cord sold separately for dubbing (KA333) to connect the recorder with other devices.
The detailed input levels cannot be adjusted with this recorder. When you connect the recorder to an
external device, execute a test recording and adjust the output level of the external device.
•A microphone with plug-in power, which receives the power supply from this recorder, can be used.
When the external stereo microphone is inserted while set in HQ, SP, and LP modes, it enables recording
only with the L channel microphone.
When an external monaural microphone is used while the recorder is set to ST XQ, ST HQ, or ST SP
mode, audio will be recorded to the L channel only.
Recording from External Microphone or Other Devices
Recording from External Microphone or Other Devices
30
2
1
Press the FOLDER button to
choose a folder.
Every time the FOLDER button is pressed,
folders will switch.
2
Press the + or
button to choose
the file that you want to play.
In the list display, use the + and – buttons
to place the cursor on the desired file.
Press the 9 button in the list display to
change the screen to the file display.
In the file display, press the 9 or 0
button to select a file.
If you want to return from the file display
to the list display, press the FOLDER
button.
3
Press the PLAY or OK button to
start playback.
The record/play indicator light glows
green.
a Play position bar indicator
b Current playback time
c File length
You can change the playing speed by
pressing the PLAY button while the
recorder is playing back ( P. 84).
4
Press the + or
button to select
the proper sound volume.
The display shows the volume level. You
can choose between 0 and 30.
d Volume level meter
03
1
22
M
41
S
20
HQ
00
M
00
S
03
1
22
M41S
20
HQ
05
M
10
S
a
b
c
1
2
3
4
03
120
1 5
d
Volume Level
HQ
001/12
WS
330001.
WMA
/ 5
WS
330002.
WMA
WS
330003.
WMA
WS
330004.
WMA
003/12
WS
330001.
WMA
WS
330002.
WMA
WS
330003.
WMA
/ 5
WS
330004.
WMA
Playing
List display
File display
Playing
31
2
Forwarding
Press and hold the 9 button while the
recorder is stopped in the file display.
If you release the button, it will stop. Press
the PLAY or OK button to start playing
back from where it was stopped.
a File length
Press and hold the 9 button while playing a file.
When you release the 9 button the recorder will resume normal
playback.
If there is an index mark or temp mark ( P. 76) in the middle of the file, the
recorder will stop at that location.
The recorder stops when it reaches the end of the file. Continue pressing the
9 button to proceed with the cue from the beginning of the next file.
5
Press the STOP or OK button at
any point you want to stop the
playback.
Stop a file play back at any point.
Press the PLAY or OK button to start
playing back from where it was stopped.
Press and hold the STOP button while this
recorder is in stop mode to display the
remaining memory.
03
120
22M41S
a
HQ
02
M
05
S
5
1
M
7
D
07
Y
10
:
38
A
M
Time & Date
Remain
68
H
56
M
02
S
1.9
GB
Playing
Playing
32
2
Rewinding
Press and hold the 0 button while the
recorder is stopped in the file display.
If you release the button, it will stop. Press
the PLAY or OK button to start playing
back from where it was stopped.
a File length
Press and hold the 0 button while playing a
file.
When you release the 0 button the recorder will resume normal
playback.
If there is an index mark or temp mark in the middle of the file, the recorder
will stop at that location.
The recorder stops when it reaches the beginning of the file. Continue
pressing the 0 button to proceed with the review from the end of the
previous file.
If the 0 button is kept pressed while the recorder is stopped at the start of
the top file, the recorder will fast rewind starting from the end of the last file.
Locating the Beginning of the File
Press the 9 button during playback, slow playback, or fast playback.
The next file is cued and playback starts at the previously set
speed.
Press the 0 button during playback, slow playback, or fast playback.
The file being played is cued and playback starts at the previously
set speed.*
Press the 0 button 2 times during playback, slow playback or fast
playback.
The previous file is cued and playback starts at the previously
set speed.*
If there is an index mark or temp mark in the middle of the file, the recorder
will stop at that location.
* If the previous playback is set ( P. 82), the recorder will playback in reverse
skip for the set time.
03
120
22M41S
a
HQ
02
M
05
S
Playing
Playing
33
2
Playback Through Earphone
An earphone can be connected to the EAR jack of the recorder for
listening.
When the earphone is used, the recorder speaker will be
switched-off.
.......................................................................................................
Notes
•To avoid irritation to the ear, insert the earphone after turning down the
volume level.
When you listen with the earphone during playback, do not raise the volume
too much. It may cause hearing impairment and decrease in hearing ability.
To EAR
(earphone)
jack
Playing
Playing
34
2
1
While the recorder is stopped or
during playback, press the MENU
button for 1 second or longer.
The “Menu” screen opens ( P. 42).
If the recorder is stopped, proceed to Step
2. If the recorder is playing, proceed to
Step 4.
2
Press the + or
button to choose
“Play Menu”.
3
Press the OK or 9 button.
The “Play Menu” screen opens.
4
Press the + or
button to choose
“Noise Cancel”.
5
Press the OK or 9 button.
The noise cancel setup process begins.
6
Press the + or
button to choose
from “High”, “Low” and “Off”.
If the recorder goes to the menu screen
during playback, move the cursor to
change playback sound accordingly.
2
1
4
3
6
5
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
Back Space
Noise Cancel
Voice Filter
Play Speed
Play Menu
Hi
g
h
Low
Of f
Noise Cancel
Noise Cancel Function (Noise Cancel)
If recorded audio is difficult to understand because of noisy surroundings, adjust the Noise
Cancel setting level. Noise will be reduced in the file when it’s played back for better sound
quality.
Noise Cancel Function (Noise Cancel)
35
2
7
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Play Menu” screen.
8
Press the STOP button to close the
menu.
If the recorder goes to the menu screen
during playback, press the 0 button to
close the menu screen.
If it is set to anything other than “Off”,
will appear on the display.
a Noise Cancel indicator
03
1
22
M41S
20
HQ
05
M
10
S
a
8
7
Noise Cancel Function (Noise Cancel)
..................................................................................................................................................
Notes
If you set Noise Cancel to “Low” or “High”, the setting remains valid until it’s set to “Off”.
The Noise Cancel is not available when either the Voice Filter ( P. 36) or Playback Speed ( P. 84) is set.
If the Noise Cancel is enabled, the Voice Filter and Playback Speed are not available.
Noise Cancel Function (Noise Cancel)
36
2
1
While the recorder is stopped or
during playback, press the MENU
button for 1 second or longer.
The “Menu” screen opens ( P. 42).
If the recorder is stopped, proceed to Step
2. If the recorder is playing, proceed to
Step 4.
2
Press the + or
button to choose
“Play Menu”.
3
Press the OK or 9 button.
The “Play Menu” screen opens.
4
Press the + or
button to choose
“Voice Filter”.
5
Press the OK or 9 button.
The voice filter setup process begins.
6
Press the + or
button to choose
between “On” and “Off”.
On: Voice Filter will be turned on.
Off: Voice Filter will be canceled.
If the recorder goes to the menu screen
during playback, move the cursor to
change playback sound accordingly.
2
1
4
3
6
5
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
Back Space
Noise Cancel
Voice Filter
Play Speed
Play Menu
On
O
ff
Voice Filter
Set the Voice Filter (Voice Filter)
The recorder has a Voice Filter Function to cut low and high frequency tones during normal,
fast, or slow playback, and enable clear audio playback.
Set the Voice Filter (Voice Filter)
37
2
7
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Play Menu” screen.
8
Press the STOP button to close the
menu.
If the recorder goes to the menu screen
during playback, press the 0 button to
close the menu screen.
If it is set to “On”,
will appear on the
display.
a Voice Filter indicator
..................................................................................................................................................
Notes
Once the Voice Filter is set to “On“, it will remain enabled until set to “Off“.
The Voice Filter and Noise Cancel ( P. 34) features cannot be used at the same time.
Set the Voice Filter (Voice Filter)
8
7
03
1
22
M41S
20
HQ
05
M
10
S
a
Set the Voice Filter (Voice Filter)
38
2
1
While the recorder is stopped or
during playback, press the MENU
button for 1 second or longer.
The “Menu” screen opens ( P. 42).
If the recorder is stopped, proceed to Step
2. If the recorder is playing, proceed to
Step 4.
2
Press the + or
button to choose
“Play Menu”.
3
Press the OK or 9 button.
The “Play Menu” screen opens.
4
Press the + or
button to choose
“All Play”.
5
Press the OK or 9 button.
The continuous playback setup process
begins.
6
Press the + or
button to choose
between “On” and “Off”.
On: Continuous playback.
Off: Returns to playback with stop
between single files.
2
1
4
3
6
5
Noise Cancel
Voice Filter
Play Speed
All Play
Play Menu
On
O
ff
All Play
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
Continuous Playback (All Play)
This function allows you to listen to all your recordings of one folder in one go without any
stop between the files.
Continuous Playback (All Play)
39
2
8
7
Continuous Playback (All Play)
7
Press the OK button to complete the setup screen.
If the 0 button is pressed, the setting will be canceled and it
will return to the “Play Menu” screen.
8
Press the STOP button to close the menu.
If the recorder goes to the menu screen during playback, press
the 0 button to close the menu screen.
..................................................................................................................................................
Note
After playback of last file in the folder, “End” appears on the screen and playback stops automatically.
Continuous Playback (All Play)
40
2
1
Choose the file that you want to
lock.
In the list display, use the + and – buttons
to place the cursor on the desired file.
Press the 9 button in the list display to
change the screen to the file display.
In the file display, press the 9 or 0
button to select a file.
2
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42).
3
Press the + or
button to choose
“Sub Menu”.
4
Press the OK or 9 button.
The “Sub Menu” screen opens.
5
Press the OK or 9 button.
The file locking setup process begins.
03
1
22
M
41
S
20
HQ
00
M
00
S
1
2
3
4,5
003/12
WS
330001.
WMA
WS
330002.
WMA
WS
330003.
WMA
/ 5
WS
330004.
WMA
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
ub MenuS
Lock
Time & Date
Format
System
Locking Files (Lock)
Locking a file keeps important data from being accidentally erased.
Locked files are not erased when you choose to erase all files from a folder ( P. 73).
List display
File display
Locking Files (Lock)
41
2
6
Press the + or
button to choose
between “On” and “Off”.
On: Locks the file and prevents it from
being erased.
Off: Unlocks the file and allows it to be
erased.
7
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Sub Menu” screen.
8
Press the STOP button to close the
menu.
a Erase lock indicator
03
1
22
M41S
20
HQ
00
M
00
S
a
6
8
7
03
120
On
O
ff
Locking Files (Lock)
Locking Files (Lock)
42
2
ST XQ, ST HQ, ST SP, HQ, SP, LP
Rec
Menu
Play
Menu
High, Low, Off
Conf, Dict
On, Off
On, Off
Off, 1Sec, 2Sec, 3Sec, 4Sec, 5Sec, 10Sec
On, Off
S.
Play:
x0.5, x0.625, x0.75, x0.875 Play
F. Play:
x1.125, x1.25, x1.375, x1.5 Play
On, Off
Back Space
Play Speed
Rec Mode
Mic Sense
VCVA
Low Cut Filter
Noise Cancel
Voice Filter
All Play
Menu List (VOICE Mode)
Menu Setting
Ref. Page
Below is a map of the menu structure seen when the menus are entered while the recorder is
stopped. If the MENU button is pressed and held for more than one second during playback,
“Back Space”, “Noise Cancel”, “Voice Filter”, “Play Speed”, and “All Play” settings can be set,
without interrupting playback.
Menus highlighted with are common to both “VOICE” and “MUSIC” modes, and can
be selected even when the mode switch is set to “MUSIC”.
Menu List (VOICE Mode)
P. 24
P. 25
P. 22
P. 26
P. 82
P. 34
P. 36
P. 84
P. 38
43
2
Beep &
Display
Sub
Menu
On, Off
On, Off
On, Off
On, Off
Start, Cancel
Capacity, Model Name, Version
01
-
12
Beep
Backlight
Contrast
Time & Date
Format
System Info.
LED
Lock
Menu List (VOICE Mode)
..................................................................................................................................................
Notes
The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected
item is not applied.
If the menus are entered during playback but 8 seconds elapse with no buttons being pressed, the
screen will return to the playback display.
Menu Setting
Ref. Page
In order of hour, minute, year, month,
and day
Menu List (VOICE Mode)
P. 87
P. 88
P. 89
P. 90
P. 40
P. 17
P. 91
P. 93
44
3
Using the Recorder on Your PC
Saving Files in Your PC
By being connected to a PC, the recorder enables you to do the following:
•You can save (back-up) the files stored in the recorder on your PC. Also, you can
transfer the files from your PC to the recorder.
Using the Windows Media Player, the stored WMA or MP3 files on your PC can be
transferred and played back on this recorder.
Playback voice files on your PC.
The voice file recorded by this recorder can be played on your PC using the Windows
Media Player or the simplified playback software, DSS Player - Lite, which can be
downloaded for free from the website of the Olympus. Using the DSS Player - Lite
enables you to search the index marks that are marked on the voice files. Free DSS
Player-Lite can be downloaded from Olympus homepage.
http://www.olympusamerica.com/cpg_section/cpg_downloads.asp
http://olympus-europa.com/consumer/2590_software.cfm
Precautions on Using the Recorder Connected to a PC
When you are downloading a file from the recorder or uploading a file to the recorder, do
not remove the USB connecter even if the screen is indicating you can. Data is still
being transferred while the record/play indicator light and USB access indicator light are
blinking in red. When removing the USB connecter, be sure to follow the description in
P. 47. If the USB connecter is removed before the drive is stopped, data may not be
successfully transferred.
On a PC, do not format the drive of the recorder. Initialization is not successfully
achieved on a PC. For initialization, follow the instructions in the Sub Menu screen of the
recorder ( P. 91).
Never make an operation such as deleting, moving or changing the name of this
recorders 5 voice folders, music folders or management files in each folder using the file
management tool such as “Explorer”.
The order of files may be changed or files may become unrecognizable.
Saving Files in Your PC
45
3
Saving Files in Your PC
Data can be written or uploaded to the
recorder even though the attribute of
the recorder drive is shown as read
only by the operating system of the PC.
As the noise may cause adverse effects
on electronics devices nearby the
recorder, unplug the external
microphone and earphone when you
connect the recorder to a PC.
Operating
Environment
PC:
IBM PC/AT compatible PC
Operating System:
Microsoft Windows 2000/XP/Vista
USB port:
One free port
Others:
Internet environment when accessing to
the music information site.
...................................................................
Notes
The support service will not cover if your PC
has been updated from Windows 95/98/Me to
Windows 2000/XP/Vista.
Any failure on a self-modified PC will not be
covered under the operational warranty.
Saving Files in Your PC/Operating Environment
46
3
1
With the recorder stopped, slide the HOLD
switch to the HOLD position, and turn the
recorder off.
The display will turn off.
2
Detach the battery compartment pressing the
RELEASE button of the rear side.
3
Connect the recorder’s USB
terminal to a PC USB port or
USB hub.
“Remote” is displayed on recorder if
the USB is connected.
Launch My Computer, in the window,
the recorder will appear as a
removable disk.
4
Transfer the voice files to your computer.
The 5 voice folders of this recorder are displayed as
“DSS_FLDA”, “DSS_FLDB”, “DSS_FLDC”, “DSS_FLDD
and “DSS_FLDE”, and the recorded voice files are saved in
WMA format in these folders.
You can copy them to any folder on your computer.
While transmitting data, “Busy” is displayed, and the record/
play indicator light and USB access indicator light flashes red.
If you double-click on the file, Windows Media Player will
be launched and playback will start.
1
2
3
Remote
Connecting to Your PC
Connecting to Your PC
..................................................................................................................................................
Notes
If you are using Windows 2000, Windows Media Player must be installed on the PC.
If you leave the battery compartment disconnected from the recorder for a longer period of time or if you
remove the battery compartment repeatedly at short intervals, you may have to reset the time ( P. 17).
Connecting to Your PC
47
3
1
Click the on the task bar located
at the lower-right corner of the
screen. Click [Safely Remove
Hardware].
The drive letter will differ depending on the
PC being used.
2
When the safe to remove hardware window appears, click [OK].
3
Make sure that the display is turned off, disconnect the USB.
4
Connect the battery compartment to the main unit.
Leave the HOLD switch in its disabled position ( P. 75) when connecting the battery
compartment.
Connecting to Your PC
Disconnecting from Your PC
..................................................................................................................................................
Notes
NEVER disconnect the USB while the record/play indicator light and USB access indicator light are
flashing in red. If you do so, the data may be destroyed.
Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.
Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.
Use the supplied USB extension cable depending on situations.
Do not use USB extension cables other than the supplied cable. Using cables from other manufacturers
could result in damage to the recorder. Do not use the supplied USB extension cable with devices from
other manufacturers.
1
Connecting to Your PC
48
4
Using the Recorder as a Music Player
The recorder supports music files in WMA and MP3 formats, which can be transferred from
the PC to the corresponding music folder of the recorder.
Using Windows Media Player
By using Windows Media Player, music files
from music CDs can be converted (ripped) (
P. 51) and music files that you have bought
from any music distribution sites can be easily
transferred to the recorder (
P. 52).
Using the Recorder as a Music Player
Internet
Music CD
Copyright and Copyright Protection Feature (DRM)
By the Copyright Act, any voice/music files and music CDs downloaded from the Internet
without the copyright holders permission may not be reproduced, distributed, publicized/re-
publicized on the Internet, or converted into WMA or MP3 files for the purpose of commercial
business or sale.
A WMA file may be provided with DRM (Digital Right Management) for copyright protection.
DRM limits the file to copy or distribute music files that are converted (ripped) from a music
CD or downloaded from music distribution services. To transfer a WMA file with DRM to the
recorder, you need to use appropriate methods such as Windows Media Player. Copying the
music files with DRM purchased from online music distribution service to a portable device
such as this recorder may be restricted.
..................................................................................................................................................
Note
This recorder is compatible with Microsoft Corporation DRM9, but not with DRM10.
Using the Recorder as a Music Player/
Using Windows Media Player
49
4
Importing Content for Listening on the
Recorder
You can transfer language content and music files imported from language CDs and the
Internet using Windows Media Player for playing on the recorder.
The recorder is compatible with WMA and MP3 language content.
Import Files Using Windows Media Player
Copy music files and language content from CDs to a computer.
Please see “Copying Music from CD” (
P. 51) for details.
Transfer files from the PC to the recorder
Transfer copied music files and language content from the PC to the recorder.
Please see “Transferring Music File to the Recorder” (
P. 52) for details.
Directly Record Files to the Recorder
Connect the recorder to another device to record directly to the recorder.
Please see “Recording the Sound of Other Devices with this Recorder” (
P. 29) for
details.
Importing Content for Listening on the Recorder
50
4
Windows Media Player 11 Windows Media Player 10
Window Names
1 Features taskbar
2 Seek slider
3 Shuffle button
4 Repeat button
5 Stop button
6 Previous button
7 Play button
8 Next button
9 Mute button
0 Volume slider
1
Window Names
1 Features taskbar
2 Quick Access Panel button
3 Seek slider
4 Rewind button
5 Play button
6 Stop button
7 Previous button
8 Next button
9 Mute button
0 Volume slider
! Shuffle/Repeat button
@ Fast Forward button
1
4
5
6
7
8
9
0
!
@
3
2
2 9
0
864
753
51
4
1
Insert CD into the CD-ROM drive
and start Windows Media Player.
2
From the Features taskbar, click
the [Rip] menu.
After clicking the [Rip] menu, click the
[View Album Info] for Windows Media
Player 10 as necessary.
If Internet connectivity is available, CD
information is searched.
3
Put a check mark on the music file
that you want to copy.
5
Click the [Start Rip].
For Windows Media Player 10
Click the [Rip Music].
Files copied to a PC are stored in WMA
format. Music files copied are
categorized by artist, album, genre, etc.
and added to the play list.
Copying Music from CD
Windows Media Player 10
243
Copying Music from CD
Windows Media Player 11
243
52
4
Transferring Music File to the Recorder
You can transfer the music files saved in your PC to this recorder. For how to copy the
music files from the CD to your PC, see “Copying Music from CD” (
P. 51).
Windows Media Player 11
1
Connect the recorder to a PC and
start Windows Media Player.
2
From the Features taskbar, click the
[Sync].
3
Click the [Sync] menu again to
select [DVR] [Advanced Options],
[Set Up Sync], then set as follows.
Click on the [Create folder hierarchy on
device] to check.*
1
*
2
The folder with artist name or album name
is automatically created. This will make you
find the file you want to listen to more
easily.
*1 If [Create folder hierarchy on device] is
checked by default, click to uncheck the
box once, and click it again to check.
*2 After the synchronous transfer to the
recorder, a file named “WMPInfo.xml” is
created. If you delete this file, the *1 may
need to be set again.
Transferring Music File to the Recorder
2,3
3
53
4
Transferring Music File to the Recorder
Transferring Music File to the Recorder
1
Connect the recorder to a PC and
start Windows Media Player.
2
From the Features taskbar, click the
[Sync].
3
From the pull down menu on the left
side window, select the play list to
be transferred to the recorder and
put the check marks on the music
file that you want to transfer.
The order of music pieces can be changed
by Drag & Drop of the music file in the play
list displayed.
4
From the pull down menu on the
right side window, select the drive
corresponding to the recorder.
The recorder is recognized as a Removable
Disk.
243
Windows Media Player 10
4
Select the desired category from the
[Library] on the left, then select music
files or albums to transfer to the
recorder and drag and drop them in
the [Sync List] on the right.
5
Click the [Start Sync].
The file is transferred to the recorder.
54
54
4
..................................................................................................................................................
Notes
Copying the music files with DRM purchased online music distribution service to a portable device such
as this recorder may be restricted.
Refer to the online help of Windows Media Player for details.
If the music files are transferred to the recorder until it reaches to the maximum memory, the message
“Cannot make the system file. Connect to PC and delete unnecessary file” may appear on this recorder’s
display. In such a case, erase the files to make free space (hundreds of KB to dozens of MB depending
on the music file sizes) for the management file. (The more capacity for the management file will be
necessary as the number of the music files increases.)
Transferring Music File to the Recorder
Transferring Music File to the Recorder
5
Click on the upper right corner
and set the synchronization options.
Click on the [Create folder hierarchy on
device] to check.*
1
*
2
The folder with artist name or album name
is automatically created. This will make you
find the file you want to listen to more
easily.
*1 If [Create folder hierarchy on device] is
checked by default, click to uncheck the
box once, and click it again to check.
*2 After the synchronous transfer to the
recorder, a file named “WMPInfo.xml” is
created. If you delete this file, the *1 may
need to be set again.
6
Click the [Start Sync].
The file is transferred to the recorder. The
music file transferred to the recorder is
displayed in Item on Device.
56
5
55
4
1
Set the mode switch to MUSIC (
P. 15) .
2
Insert the stereo earphone into the
EAR (earphone) jack of the recorder.
3
Select the music file that you want
to play ( P. 16) .
In the file display, press the 9 or 0
button to select a file.
a Current folder (The first 6 characters will
be displayed)
b File being selected
c Length of the file being selected
If you want to return from the file display
to the list display, or go back from the list
display to a higher-level list display, press
the FOLDER button.
4
Press the PLAY or OK button to
start playback.
The title/artist name that cannot be
displayed in one line is displayed scrolling
to the left.
d Title and artist name of the file being
played
e Play time of the file being played
You can change the playing speed by
pressing the PLAY button while the
recorder is playing back ( P. 84).
SONG A / A
rtist
C
R
oot
04260000
01/06
Fld
b
c
a
SONG A / A
rtist
C
R
oot
04260213
01/06
Fld
d
e
4
This recorder supports WMA and MP3 formats. To playback the music files using the music
player, you need to transfer (copy) the corresponding music files from the PC to this recorder’s
folders for music ( P. 52).
Music Playback
File display
Music Playback
2
1
1
56
4
5
6
SONG A / A
rtist
C
R
oot
01/06
1 5
Volume Level
f
1
M
7
D
07
Y
10
:
38
A
M
Time & Date
Remain
1.9
GB
5
Press the + or
button to select
the proper sound volume.
The display shows the volume level. You can
choose between 0 and 30.
f Volume level meter
6
Press the STOP or OK button at
any point you want to stop the
playback.
Stop a file play back at any point.
Press the PLAY or OK button to start
playing back from where it was stopped.
Press and hold the STOP button while this
recorder is in stop mode to display the
remaining memory.
The next track will automatically start once
the track being played is finished.
............................................................................................................................................................
Notes
The proper bit rate for playback on the recorder is 5 kbps to 256 kbps for both the WMA and MP3 format.
It is possible to play back MP3 files with different bit rates (converting the bit rate within one file);
however, the displayed time may not be accurate.
When using the earphones, do NOT set the volume too high. Listening at very high volume may lead to
hearing loss.
It is possible to listen to music without the earphones, using the internal speakers; however, the sound
will be in mono, not stereo.
Up to 40 characters per track can be used to list title and artist name.
Music Playback
Music Playback
57
4
Music Playback
Forwarding
Press and hold the 9 button while the recorder is stopped in the
file display.
If you release the button, it will stop. Press the PLAY or OK button
to start playing back from where it was stopped.
Press and hold the 9 button while playing a file.
When you release the 9 button the recorder will resume normal
playback.
If there is an index mark or temp mark ( P. 76) in the middle of the file, the
recorder will stop at that location.
The recorder stops when it reaches the end of the file. If you press and hold
the 9 button, it continues fast forwarding within the playback range selected
in the “Play Mode”( P. 59). While “Random” ( P. 61) is set to “On”, it
continues fast forwarding of files randomly.
Rewinding
Press and hold the 0 button while the recorder is stopped in the
file display.
If you release the button, it will stop. Press the PLAY or OK button to
start playing back from where it was stopped.
Press and hold the 0 button while playing a file.
When you release the
0
button the recorder will resume normal
playback.
If there is an index mark or temp mark in the middle of the file, the recorder
will stop at that location.
Once it reaches back to the starting position of the file, it stops. If you press
and hold the 0 button, it continues rewinding within the playback range
selected in the “Play Mode”. While “Random” is set to “On”, it continues the
rewinding of files randomly.
If the 0 button is kept pressed while the recorder is stopped at the start of
the top file, the recorder will fast rewind starting from the end of the last file.
Music Playback
58
4
Skip a Music File While Playing It
Press the 9 button during playback, slow playback, or fast playback.
The next file is cued and playback starts at the previously set
speed.
It cues within the playback range selected in “Play Mode”. If “Random” is
“On”, it cues the next file randomly.
Press the 0 button during playback, slow playback, or fast playback.
The file being played is cued and playback starts at the previously
set speed.
Press the 0 button 2 times during playback, slow playback or fast
playback.
The previous file is cued and playback starts at the previously
set speed.
If “Random” is “On”, the files will be cued randomly.
Music Playback
When the playback reaches to the end of the last file, it returns to the starting position of
the head file and stops. If “Random” ( P. 61) is “On”, it returns to the starting position of
the file that is randomly played and stops. If you select “All” in “Play Mode” ( P. 59), all
the files in this recorder can be played continuously.
When the Playback or Fast Forward Reaches to the End of the Last File
Music Playback
59
4
1
While the recorder is stopped or
during playback, press the MENU
button for 1 second or longer.
The “Menu” screen opens ( P. 70).
If the recorder is stopped, proceed to Step
2. If the recorder is playing, proceed to
Step 4.
2
Press the OK or 9 button.
The “Play Menu” screen opens.
3
Press the OK or 9 button.
Start setting a play mode.
4
Press the + or
button to select a
desired play mode.
File: Stop after playing back the current file.
File Repeat (
1
): Play the current file
repeatedly.
Folder (
Fld
): Play files continuously in the
current folder until the last file and stop.
Folder Repeat (
F
): Play all files in the
current folder continuously.
All (
All
): Play all files in the recorder
continuously and stop.
All Repeat (
A
): Play all files in the
recorder continuously and repeatedly.
2
1
3
4
Play Mode
Random
WOW
EQ
Play Menu
File
File Repeat
Folder
Folder Repeat
Play Mode
Play Menu
Beep & Display
Sub Menu
enuM
Select Play Mode (Play Mode)
There are six play modes. You can choose whether to play by file or folder, or all files stored
in the recorder.
Select Play Mode (Play Mode)
60
4
5
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Play Menu” screen.
6
Press the STOP button to close the
menu.
If the recorder goes to the menu screen
during playback, press the 0 button to
close the menu screen.
An icon will appear on the display
according to the setting.
a Selected play mode
SONG A / A
rtist
C
R
oot
04260213
F
01/06
a
6
5
..................................................................................................................................................
Notes
In “File” mode, when the recorder comes to the end of the last file in the folder, “End” flashes for 2
seconds on the display and the recorder stops at the start of the last file.
In “Folder” mode, when the recorder comes to the end of the last file in the folder, “End” flashes for 2
seconds on the display and the recorder stops at the start of the first file in the folder.
In “All” mode, after playing the last file in the folder, the recorder will start playing from the first file in the
next folder. When it comes to the end of the last file in the recorder, “End” flashes for 2 seconds on the
display and the recorder stops at the start of the first file in the recorder.
Select Play Mode (Play Mode)
Select Play Mode (Play Mode)
61
4
1
While the recorder is stopped or
during playback, press the MENU
button for 1 second or longer.
The “Menu” screen opens ( P. 70).
If the recorder is stopped, proceed to Step
2. If the recorder is playing, proceed to
Step 3.
2
Press the OK or 9 button.
The “Play Menu” screen opens.
3
Press the + or
button to choose
“Random”.
4
Press the OK or 9 button.
The random setup process begins.
5
Press the + or
button to choose
between “On” and “Off”.
On: Plays the music files within the range
set in “Play Mode” randomly.
Off: Cancels the setting.
If the recorder goes to the menu screen
during playback, move the cursor to
change playback sound accordingly.
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Play Menu” screen.
2
1
4
3
6
5
Play Mode
Random
WOW
EQ
Play Menu
On
O
ff
andRom
Random Playback (Random)
You can set the random playback of the music files within the range set in “Play Mode”
( P. 59).
Random Playback (Random)
62
4
7
Press the STOP button to close the
menu.
If the recorder goes to the menu screen
during playback, press the 0 button to
close the menu screen.
If it is set to “On”,
will appear on the
display.
a Random playback indicator
SONG A / A
rtist
C
R
oot
04260213
Fld
01/06
a
7
Random Playback (Random)
............................................................................................................................................................
Notes
If “All” is selected in “Play Mode”, all files in a folder are randomly played, then another folder will be
randomly selected, and the files in the folder will be randomly played.
If both “Repeat” and “Random” are set to “On”, it repeats playback randomly.
Random Playback (Random)
63
4
1
While the recorder is stopped or
during playback, press the MENU
button for 1 second or longer.
The “Menu” screen opens ( P. 70).
If the recorder is stopped, proceed to Step
2. If the recorder is playing, proceed to
Step 3.
2
Press the OK or 9 button.
The “Play Menu” screen opens.
3
Press the + or
button to choose
“WOW”.
4
Press the OK or 9 button.
“SRS 3D” will be displayed on the screen.
5
Press the OK or 9 button again.
The surround effect setup process begins
(SRS 3D).
2
1
4
3
5
Play Mode
Random
WOW
EQ
Play Menu
SRS 3D
TruBass
WOW
The recorder has WOW XT, an audio processing technology that increases sound clarity and
bass quality. The level of the surround effect (SRS 3D) and the bass effect (TruBass) may be
individually adjusted through three levels of processing or turned off.
Surround effect (SRS 3D):Increases the sound-expansion effect and sound clarity.
Bass effect (TruBass): Enriches the low sounds.
Increasing the WOW Effect (WOW)
Increasing the WOW Effect (WOW)
64
4
6
Press the + or
button to select
the surround level.
If the recorder goes to the menu screen
during playback, move the cursor to
change playback sound accordingly.
7
Press the OK button to save
your setting.
Returns to the “SRS 3D” or “TruBass”
selection display.
If the 0 button is pressed, the setting
will be canceled.
8
Press the + or
button to
choose “TruBass”.
9
Press the OK or 9 button.
The bass effect setup process begins
(TruBass).
10
Press the + or
button to select
the bass effect level.
If the recorder goes to the menu screen
during playback, move the cursor to
change playback sound accordingly.
6
7
9
8,10
Hi
g
h
Middl e
Low
Of f
SRS 3D
SRS 3D
TruBass
WOW
Hi
g
h
Middl e
Low
Of f
TruBass
Hi
g
h
Of f
SRS 3D
Middl e
Se t
Increasing the WOW Effect (WOW)
Increasing the WOW Effect (WOW)
65
4
11
Press the OK button to save your
setting.
Returns to the “SRS 3D” or “TruBass”
selection display.
If the 0 button is pressed, the setting
will be canceled.
12
Press the STOP button to close
the menu.
If the recorder goes to the menu screen
during playback, press the 0 button
to close the menu screen.
If it is set to anything other than “Off”,
will appear on the display.
a WOW indicator
SONG A / A
rtist
C
R
oot
04260213
01/06
Fld
a
12
11
Hi
g
h
Of f
TruBass
Low
Se t
............................................................................................................................................................
Notes
If no operation is made for 3 minutes during the setting, it will return to the stop status.
Both the surround effect and bass effect are Off as the WOW default settings.
will be displayed on the screen if the surround effect or the bass effect is set.
The WOW effect will be weakened if the bit rate for any music file is less than 32 kbps.
Depending on the song, the WOW effect will be heightened, and may sound like noise. If this happens,
adjust the WOW effect.
The WOW Effect cannot be used when Playback Speed ( P. 84) is set.
Increasing the WOW Effect (WOW)
Increasing the WOW Effect (WOW)
66
4
1
While the recorder is stopped or
during playback, press the MENU
button for 1 second or longer.
The “Menu” screen opens ( P. 70).
If the recorder is stopped, proceed to Step
2. If the recorder is playing, proceed to
Step 3.
2
Press the OK or 9 button.
The “Play Menu” screen opens.
3
Press the + or
button to choose
“EQ”.
4
Press the OK or 9 button.
The equalizer setup process begins.
5
Press the + or
button to select
the desired equalizer characteristics.
Select "User" to save your own custom
equalizer settings.
If "User" is selected, proceed to Step 6.
Otherwise, proceed to Step 9.
If the recorder goes to the menu screen
during playback, move the cursor to
change playback sound accordingly.
6
Press the 9 button.
Select the frequency band.
2
1
4
3
5
6
Ro k
Pop
Jaz
Use
EQ
c
z
r
Play Mode
Random
WOW
EQ
Play Menu
Selecting Equalizer (EQ)
If you change the equalizer setting, you can enjoy the music with your favorite sound quality.
Selecting Equalizer (EQ)
67
4
7
Press the 9 or 0 button to
select the frequency band.
You can set frequency band for the 60
Hz, 250 Hz, 1 kHz, 4 kHz, and 12 kHz
bands.
8
Press the + or
button to select
the equalizer level.
You can select the equalizer level from
–10dB to 10dB in 1dB increments. The
higher the decibel value, the louder the
sound. The default setting is 0dB.
To change the settings again, press the
9 or 0 button and repeat the
procedure from step 7.
9
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Play Menu” screen.
10
Press the STOP button to close
the menu.
If the recorder goes to the menu screen
during playback, press the 0 button
to close the menu screen.
An icon will appear on the display
according to the setting.
a Selected equalizer indicator
SONG A / A
rtist
C
R
oot
04260213
01/0
6
U
Fld
a
7
8
10
9
USER
60Hz
0dB
EQ
250Hz
10dB
USER EQ
Selecting Equalizer (EQ)
............................................................................................................................................................
Notes
The equalizer default setting is Flat.
•Your equalizer settings will be retained in memory even when you change the battery.
Selecting Equalizer (EQ)
68
4
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 70).
2
Press the + or
button to choose
“Sub Menu”.
3
Press the OK or 9 button.
The “Sub Menu” screen opens.
4
Press the OK or 9 button.
Show files in the current folder in a list.
5
Press the + or
button to choose
the file you want to move it.
6
Press the OK or 9 button.
The cursor will flash to confirm that the
file can be moved.
1
2
3,4
5
6
Play Menu
Beep & Display
Sub Menu
enuM
ub MenuS
Move
Time & Date
Format
System
M
usic
SONG A.wma
SONG B.wma
SONG C.wma
oveM
M
usic
SONG A.wma
SONG B.wma
SONG C.wma
oveM
M
usic
SONG A.wma
SONG B.wma
SONG C.wma
oveM
Moving the Tracks (Move)
You can move a file in a folder to change the order of playback. First select the file for which you
want to change the playback order.
Moving the Tracks (Move)
69
4
7
Press the + or
button to select
the location to move it to.
8
Press the OK button to complete
the file moving.
If there are more files to move, repeat
Steps 5 through 8.
If the OK button is pressed for one second
or longer, file order rearrangement will
close and the recorder will return to the
“Sub Menu” screen.
9
Press the STOP button to close the
menu.
7
9
8
M
usic
SONG A.wma
SONG C.wma
SONG B.wma
oveM
M
usic
SONG A.wma
SONG C.wma
SONG B.wma
oveM
Moving the Tracks (Move)
Moving the Tracks (Move)
70
4
Play Mode
Random
EQ
WOW
Play
Menu
On, Off
Flat, Rock, Pop, Jazz, User
S.
Play:
x0.5, x0.625, x0.75, x0.875 Play
F. Play:
x1.125, x1.25, x1.375, x1.5 Play
SRS 3D: High, Middle, Low, Off
TruBass: High, Middle, Low, Off
File, File Repeat, Folder,
Folder Repeat, All, All Repeat
Off, 1Sec, 2Sec, 3Sec, 4Sec, 5Sec, 10Sec
Back Space
Play Speed
Menu List (MUSIC Mode)
Menu Setting
Ref. Page
Below is a map of the menu structure seen when the menus are entered while the recorder is
stopped. If the MENU button is pressed and held for more than one second during playback,
“Play Mode”, “Random”, “WOW”, “EQ”, “Back Space”, and “Play Speed” settings can be set,
without interrupting playback.
Menus highlighted with are common to both “VOICE” and “MUSIC” modes, and can
be selected even when the mode switch is set to “VOICE”.
Menu List (MUSIC Mode)
P. 59
P. 61
P. 63
P. 66
P. 82
P. 84
71
4
Beep &
Display
Sub
Menu
On, Off
On, Off
On, Off
01
-
12
Start, Cancel
Capacity, Model Name, Version
Beep
Backlight
Contrast
Time & Date
Format
System Info.
LED
Move
Menu List (MUSIC Mode)
..................................................................................................................................................
Notes
The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected
item is not applied.
If the menus are entered during playback but 8 seconds elapse with no buttons being pressed, the
screen will return to the playback display.
Menu Setting
Ref. Page
In order of hour, minute, year, month,
and day.
Programs the order in which to play
files in the folder.
Menu List (MUSIC Mode)
P. 87
P. 88
P. 89
P. 90
P. 68
P. 17
P. 91
P. 93
72
5
1
Select the file you want to delete.
In the stop status, display the file or place
the cursor on the file in the list display.
2
Press the ERASE button.
The “Cancel” indicator flashes.
3
Press the + button to choose
“Erase”.
4
Press the OK button.
The display changes to “File Erase!” and
erasing will start.
“Erase Done” is displayed when the file is
erased. File numbers will be reassigned
automatically.
{
2
4
3
33
120
XQ
Er
C
an
se
c
el
a
33
120
il
Er
a
se
eF
!
33
119
XQ
E
ra
s
e
D
o
ne
33
120
Er
C
an
se
c
el
a
Features Common to the Voice Recorder and Music Player
Erasing
Erasing One File at a Time
A selected file can be erased from a folder.
* This chapter will use VOICE mode display screens to explain the operations.
Erasing
73
5
1
Press the FOLDER button to select
the folder in which you want to
erase all files.
2
Press the ERASE button twice.
The “Cancel” indicator flashes.
3
Press the + button to choose “All
Erase”.
4
Press the OK button.
The display changes to “All Erase!” and
erasing will start.
“Erase Done” is displayed when the files are
erased. The locked files and read-only files
are reassigned the file numbers in ascending
order, starting from “1”.
{
1
2
4
3
120
XQ
C
an
c
el
lAErseal
120
ll
Er
a
se
A
!
120
C
an
c
el
lAErseal
00
00
XQ
E
ra
s
e
D
o
ne
Erasing
Erase All Files from a Folder
All files in a folder can be erased simultaneously.
The locked files ( P. 40) and the files set to read-only on the PC will not be erased.
Erasing
74
5
Notes
An erased file cannot be restored.
The locked files and the files that are set to read-only will not be erased ( P. 40).
If an action is not selected within eight seconds on the “Cancel”, “Erase”, or “All Erase” screens, the
recorder will return to stop status.
It may take over 10 seconds to complete erasing. Never turn the power off or remove batteries during
this time because data may be corrupted.
Erasing
Erasing
76
5
1
Locate the index or temp mark you
want to clear.
2
Press the 9 or 0 button to
select an index or temp mark to
erase.
1
Press the INDEX button during
recording or playing.
A number appears on the display and an
index mark or temp mark will be placed.
Even after an index or temp mark is
placed, recording or playback will continue
so you can place index or temp marks in
other locations in a similar manner.
1
2
120
120
08
nd
Se
t
eIx
HQ
Index Marks and Temp Marks
If index marks and temp marks are placed, you can quickly find a location you want to listen
to in fast forward and fast rewind and when cuing a file. Index marks cannot be placed on
files created on machines other than Olympus IC recorders, but temp marks can be placed
instead to temporarily remember desired locations.
Setting an Index Mark or a Temp Mark
Clearing an Index Mark or a Temp Mark
Follow the procedures below to erase index or temp marks.
120
120
08
ndeIx
16
M
41
S
HQ
Index Marks and Temp Marks
77
5
120
120
08
ndeIx
leaCr
HQ
Index Marks and Temp Marks
..................................................................................................................................................
Notes
Up to 16 index and temp marks can be set in a file. If you try to place more than 16 index or temp marks,
the “Index Full” message will appear for index marks, and “Temp Full” for temp marks.
Index or temp marks cannot be set or erased in a locked file ( P. 40).
3
Press the ERASE button while the
index or temp number appears for
approximately 2 seconds on the
display.
The index or temp mark is erased.
Index or temp numbers after the erased index or temp number will
automatically move up.
Temp marks are temporary markings, so if you move to another
file, switch to the list screen, or connect the recorder to a computer,
they will be automatically erased.
3
Index Marks and Temp Marks
79
5
How to Begin Segment Repeat Playback
Cancel the Segment Repeat Playback Function
Press the REC button.
The segment repeat playback is released and playback
continues without repeating.
Press the STOP button.
The segment repeat playback is released and stop playback.
Press the 9 button.
Pressing the 9 button will release segment repeat playback
and fast forward and cue to the beginning of the next file.
Press the 0 button.
Pressing the 0 button will release segment repeat playback
and rewind and reverse to the beginning of the current file.
How to Begin Segment Repeat Playback
81
5
6
Press the + or
button to change
the setting.
If the recorder goes to the menu screen
during playback, move the cursor to
change playback sound accordingly.
7
Press the OK button to complete
the setup screen.
The new setting will be displayed on the
screen.
Pressing the 0 button rather than the
OK button will cancel the new setting and
return the display to the previous menu
screen.
8
Press the STOP button to close the
menu.
If the menus were entered during
playback, pressing the 0 button will
return the screen to the playback display
without interrupting playback.
Hi
g
h
Noise Cancel
Hi
g
h
S E T
6
8
7
Menu Setting Method
Hi
g
h
Low
Of f
Noise Cancel
Menu Setting Method
83
5
7
6
8
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
Auto Backspace Review (Back Space)
6
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Play Menu” screen.
7
Press the STOP button to close the
menu.
If the recorder goes to the menu screen
during playback, press the 0 button to
close the menu screen.
8
Press the 0 button while the file
is being replayed.
Playback starts at the set point of
seconds before.
..................................................................................................................................................
Note
If the setting other than ”Off” is selected at the previous playback, and even though the 0 button is
pressed, it does not reverse skip to the cue or the index mark position. Reverse skip is executed for
only the set time (1 to 10 seconds).
Auto Backspace Review (Back Space)
86
5
..................................................................................................................................................
Notes
•F. Play and S. Play are available even if either the Voice Filter ( P. 36) or Equalizer ( P. 66) is set.
•F. Play and S. Play are not available if either the Noise Cancel ( P. 34) or WOW Effect ( P. 63) is set.
During fast playback/slow playback, it will be played back in monaural even though the file was recorded
in ST XQ, ST HQ, ST SP mode.
Playback speed will return to normal if the mode switch setting is changed.
10
9
Changing the Playback Speed (Play Speed)
9
Press the OK button to complete the setup screen.
Returns to the “S.Play” or “F.Play” selection display.
10
Press the STOP button to close the menu.
If the recorder goes to the menu screen during playback, press
the 0 button to close the menu screen.
As in Regular Play mode, you can stop playback, cue a file, or insert
an index mark ( P. 76) in F. Play and S. Play modes as well.
Changing the Playback Speed (Play Speed)
88
5
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42, P.70).
2
Press the + or
button to choose
“Beep & Display”.
3
Press the OK or 9 button.
The “Beep & Display” screen opens.
4
Press the + or
button to choose
“Backlight”.
5
Press the OK or 9 button.
The backlight setup process begins.
6
Press the + or
button to choose
between “On” and “Off”.
On: Backlight is enabled.
Off: Backlight is disabled.
7
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Beep & Display” screen.
8
Press the STOP button to close the
menu.
2
3
1
4
5
6
8
7
Beep
Backlight
Contrast
LED
Beep & Display
On
O
ff
Backlight
Backlight (Backlight)
The recorder display backlight is On by default. The display will remain lit for about 10 seconds
when a button on the recorder is pressed.
Backlight (Backlight)
89
5
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42, P. 70).
2
Press the + or
button to choose
“Beep & Display”.
3
Press the OK or 9 button.
The “Beep & Display” screen opens.
4
Press the + or
button to choose
“Contrast”.
5
Press the OK or 9 button.
The contrast setup process begins.
6
Press the + or
button to set the
contrast level.
You can adjust the LCD display contrast
level from 1 to 12.
7
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Beep & Display” screen.
8
Press the STOP button to close the
menu.
2
3
1
4
5
6
8
7
Beep
Backlight
Contrast
LED
Beep & Display
06
L
H
on tCastr
Level
LCD Contrast Adjustment (Contrast)
Display contrast can be adjusted in 12 levels.
LCD Contrast Adjustment (Contrast)
90
5
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42, P. 70).
2
Press the + or
button to choose
“Beep & Display”.
3
Press the OK or 9 button.
The “Beep & Display” screen opens.
4
Press the + or
button to choose
“LED”.
5
Press the OK or 9 button.
The LED setup process begins.
6
Press the + or
button to choose
between “On” and “Off”.
On: LED light will be set.
Off: LED light will be canceled.
7
Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Beep & Display” screen.
8
Press the STOP button to close the
menu.
2
3
1
4
5
6
8
7
Beep
Backlight
Contrast
LED
Beep & Display
LED
On
O
ff
LED (LED)
You can set it so the Record/Play indicator light does not turn on.
LED (LED)
91
5
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42, P. 70).
2
Press the + or
button to choose
“Sub Menu”.
3
Press the OK or 9 button.
The “Sub Menu” screen opens.
4
Press the + or
button to choose
“Format”.
5
Press the OK or 9 button.
The “Cancel” indicator flashes.
6
Press the + button to choose
“Start”.
2
1
4
3
5
6
Rec Menu
Play Menu
Beep & Display
Sub Menu
enuM
ub MenuS
Lock
Time & Date
Format
System
St
C
an
rt
c
el
a
ormaFt
St
C
an
rt
c
el
a
ormaFt
Formatting the Recorder (Format)
If you format the recorder, all files will be removed and all function settings will return to
defaults except date and time settings. Transfer any important files to a computer before
formatting the recorder.
Formatting the Recorder (Format)
92
5
7
Press the OK button.
After the "Data Will Be Cleared" message
is on for 2 seconds, "Cancel" will turn on.
8
Press the + button again to choose
“Start”.
9
Press the OK button.
Formatting begins and an indicator flashes
on the display.
“Format Done” displays when formatting
ends.
{
8
7,9
St
C
an
rt
c
el
a
ormaFt
Su e?r
St
C
an
rt
c
el
a
ormaFt
Su e?r
ormaFt
Fo mart!
ormaFt
F
or
m
a
D
o
ne
t
Formatting the Recorder (Format)
..................................................................................................................................................
Notes
Never turn the power off or remove batteries during formatting because data may be corrupted. It may
take over 10 seconds to complete erasing.
Never format the recorder from a PC.
After formatting, recorded voice file names may start from 0001.
Once the recorder is formatted, the music files with DRM may not be transferred to the recorder again.
When the recorder is formatted, all the saved data, including locked files and read-only files, are erased.
Formatting the Recorder (Format)
93
5
1
While the recorder is stopped,
press the MENU button for 1
second or longer.
The “Menu” screen opens ( P. 42, P. 70).
2
Press the + or
button to choose
“Sub Menu”.
3
Press the OK or 9 button.
The “Sub Menu” screen opens.
4
Press the + or
button to choose
“System Info.”.
5
Press the OK or 9 button.
“Capacity/Model/Version” will appear.
6
Press the STOP button to close the
menu.
2
3
1
ub MenuS
Lock
Time & Date
Format
System Info.
:
2GB
:
WS331
:
1.00
Capacity
Model
Version
System Info.
Viewing System Information (System Info.)
You can check the recorder's information on the menu screen.
4
5
6
Viewing System Information (System Info.)
94
6
Other Practical Use Methods
Using as External Memory of the Computer
With the recorder connected to your PC, you can download data from the memory to your PC and
upload data stored on your PC to the memory.
Example: Copying Data from PC to Recorder using Explorer
1
Start Windows.
2
Connecting the recorder to your PC.
For the connection procedure, refer to “Connecting to Your PC” ( P. 46).
3
Open the Explorer window.
The product’s name is displayed.
4
Copy the data.
While the data is being written or copied, the record/play indicator light and USB access
indicator light on the recorder will flash in red.
5
Unplug the recorder from a computer.
For how to unplug the recorder, please see "Disconnecting from Your PC" ( P. 47).
..................................................................................................................................................
Note
NEVER disconnect the USB while the record/play indicator light and USB access indicator light are
flashing in red. Otherwise data may be damaged.
Using as External Memory of the Computer
95
7
Other Information
Alarm Message List
Meaning
Low battery
power
Erase-locked
Index full
Tempmark full
Folder full
Error in the
internal
memory
Illegally copied
file
Zero remaining
memory
No file
Formatting
error
The
management
file cannot be
created.
Action
Replace with new batteries ( P. 12).
Unlock the file (P. 40).
Erase index marks that are no longer
required ( P. 76).
Erase Tempmarks that are no longer
required ( P. 76).
Erase unnecessary files ( P. 72).
This is a malfunction, so go to the store
where you purchased the recorder or an
Olympus service station for repair.
Delete the file ( P. 72).
Erase unnecessary files ( P. 72).
Select another folder.
Reformat the memory ( P. 91).
Connect the recorder to a computer
and delete any unnecessary files.
Explanation
Battery power is getting low.
Tried to delete a locked file.
The file is full of index marks
(maximum of 16 marks).
The file is full of Tempmarks
(maximum of 16 marks).
The folder is full of files
(maximum of 200 files).
Error in the internal memory.
The music files copied
illegally.
No remaining internal memory.
No files were found in the
folder.
There was an error while
formatting the recorder's
memory.
The file for management
cannot be created due to a
shortage of capacity for
remaining flash memory.
Message
Battery Low
File Protected
Index Full
Temp Full
Folder Full
Memory Error
License
Mismatch
Memory Full
No File
Format Error
Can't Make The
System File.
Connect To PC
And Delete
Unnecessary File
Alarm Message List
7
96
Troubleshooting
Probable cause
The battery is not loaded properly.
The battery is dead.
The recorder is in HOLD mode.
The recorder is in HOLD mode.
The battery is dead.
Low remaining internal flash memory.
The maximum number of files has been
reached.
MUSIC mode is active.
The earphone is connected.
The VOL(+ or -) button is set to 0.
The file is locked.
The file is read-only.
The recorder was shaken during recording.
The recorder was placed near a cell phone
or fluorescent light while recording or during
playback.
The microphone sensitivity is too low.
The maximum number of marks has been
reached.
The file is locked.
The file is read-only.
Wrong folder.
Symptom
Nothing appears
on the display
Won’t start
Unable to
record
No playback
tone heard
Unable to erase
Noise heard
during playback
Recording level
too low
Unable to set
index marks,
tempmarks
Cannot find the
recorded voice
Action
Verify polarity is correct.
Replace with new battery ( P. 12).
Release the recorder from HOLD
( P. 75).
Release the recorder from HOLD
( P. 75).
Replace with new battery ( P. 12).
Erase unnecessary files ( P. 72).
Check another folder.
Switch to VOICE mode ( P. 14).
Unplug the earphones to use the
internal speaker.
Adjust the VOL(+ or –) button ( P. 30).
Unlock the file ( P. 40).
Cancel the read-only setting of the file
on the PC.
Move the recorder.
Set the microphone sensitivity to “Conf”
mode and try again ( P. 25).
Erase unnecessary marks ( P. 76).
Unlock the file ( P. 40).
Cancel the read-only setting of the file
on the PC.
Switch to the right folder.
Troubleshooting
7
97
Accessories (Optional)
Stereo microphone: ME51S
The high fidelity of the recording, which only
stereo can perform. Furthermore, it gives clear
sound quality with less noise.
Highly sensitive noise-cancellation
monaural microphone: ME52
This microphone is used to record sound at a
distance while minimizing surrounding noise.
Noise-Cancellation monaural
microphone: ME12
(Dictation microphone)
Used to get crisp recordings of your own voice by
reducing the effects of ambient noise.
Tie clip microphone: ME15
(Monaural)
Small concealing microphone with a tie-clip.
Telephone pickup: TP7
(Monaural)
Earphone type microphone can be plugged into
your ear while phoning. The voice or conversation
over the phone can be clearly recorded.
Ni-MH rechargeable battery and charger
set: BC400 (Europe only)
BC400 comes with an Ni-MH rechargeable
battery charger(BU-400) and 4 Ni-MH
rechargeable batteries (BR401) as a pack. This
charger can quick charge Olympus AA or AAA Ni-
MH rechargeable batteries.
Ni-MH rechargeable battery: BR401
High-efficiency rechargeable long life batteries.
Connecting cord: KA333
Connecting cord which has stereo mini-plugs
(ø3.5) with resistance at both ends. Use to
connect from the earphone jack output of the
recorder to the microphone input jack when
recording.
Converting plug adapters (PA331/PA231) which
convert to the monaural mini plug (ø3.5) or
monaural mini plug (ø2.5) are also enclosed.
DSS Player software
If you transfer voice files recorded with the
recorder to a PC, you can easily play back,
organize, and edit the files.
You can also manage Podcast contents
(download from web site or transfer to the
recorder). The DSS Player can be upgraded to a
DSS Player Plus, which is equipped with a
enhanced functionality (Option).
(compatible with recognition software, joining and
splitting of the files and configuring the menu
settings of this recorder)
Accessories (Optional)
7
98
Specifications
For the Digital Voice Recorder
Recording format:
WMA (Windows Media Audio)
Input level:
–70 dBv
Sampling frequency:
ST XQ mode: 44.1 kHz
ST HQ mode: 44.1 kHz
ST SP mode: 44.1 kHz
HQ mode: 44.1 kHz
SP mode: 22 kHz
LP mode: 8 kHz
Overall frequency response:
ST XQ mode: 50 Hz to 19 kHz
ST HQ mode: 50 Hz to 15 kHz
ST SP mode: 50 Hz to 9 kHz
HQ mode: 50 Hz to 13 kHz
SP mode: 100 Hz to 7 kHz
LP mode: 100 Hz to 3 kHz
Recording time:
(WS-331M)
ST XQ mode: 35 hours 30 minutes
ST HQ mode: 71 hours 00 minutes
ST SP mode: 142 hours 05 minutes
HQ mode: 142 hours 05 minutes
SP mode: 279 hours 35 minutes
LP mode: 555 hours 45 minutes
(WS-321M)
ST XQ mode: 17 hours 40 minutes
ST HQ mode: 35 hours 25 minutes
ST SP mode: 70 hours 55 minutes
HQ mode: 70 hours 55 minutes
SP mode: 139 hours 40 minutes
LP mode: 277 hours 35 minutes
Specifications
(WS-311M)
ST XQ mode: 8 hours 45 minutes
ST HQ mode: 17 hours 40 minutes
ST SP mode: 35 hours 25 minutes
HQ mode: 35 hours 25 minutes
SP mode: 69 hours 40 minutes
LP mode: 138 hours 30 minutes
Alkaline battery life:
(Recording)
ST XQ mode: Approx. 11.5 hours
ST HQ mode: Approx. 13.5 hours
ST SP mode: Approx. 14.5 hours
HQ mode: Approx. 16 hours
SP mode: Approx. 16.5 hours
LP mode: Approx. 21 hours
(Playback/ All Mode)
Speaker playback: Approx. 7 hours
Earphone playback: Approx. 15 hours
Ni-MH rechargeable battery life:
(Recording)
ST XQ mode: Approx. 9.5 hours
ST HQ mode: Approx. 11.5 hours
ST SP mode: Approx. 12 hours
HQ mode: Approx. 12.5 hours
SP mode: Approx. 12.5 hours
LP mode: Approx. 15 hours
(Playback/ All Mode)
Speaker playback: Approx. 6 hours
Earphone playback: Approx. 11.5 hours
7
99
Specifications
Common Specifications
Recording medium:
Built-in NAND FLASH memory (WS-331M:
2GB/ WS-321M: 1GB/ WS-311M: 512MB)
Speaker:
Built-in ø18 mm round dynamic speaker
MIC jack:
ø3.5 mm, impedance 2k
EAR jack:
ø3.5 mm, impedance 8 or more
Maximum working output (3 V DC):
70 mW or more (8 speaker)
Input power requirement:
Rated voltage: 1.5 V
Batteries: AAA battery (LR03 or ZR03) or
Ni-MH rechargeable battery
External dimensions:
94.8 x 38.6 x 11 mm (without protrusions)
Weight:
47 g (including alkaline battery)
* Specifications and design are subject to change
without notice.
* Battery life is measured by Olympus. It varies
greatly according to the type of batteries used
and the conditions of use.
Specifications
For the Digital Music Player
Compatible data format:
WMA, MP3 (MPEG-1/MPEG-2 Audio
Layer-3)
Sampling frequency:
44.1 kHz
Frequency band:
20 Hz to 20 kHz
Playback time:
WS-331M: about 500 songs
WS-321M: about 250 songs
WS-311M: about 125 songs
(128kbps/4 minutes per song)
Maximum headphone output:
5mW + 5mW (at load of 22 )
Alkaline battery life:
WMA: Approx. 16 hours
MP3: Approx. 19 hours
Ni-MH rechargeable battery life:
WMA: Approx. 12.5 hours
MP3: Approx. 14 hours
7
100
Technical Assistance and Support
The following are contact information for technical support for Olympus recorders and software only.
Technical Hotline Number in the U.S. and Canada
1-888-553-4448
User Support E-mail address in the U.S. and Canada
distec@olympus.com
Technical Hotline Number in Europe
Toll free number
00800 67 10 83 00
available for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom
Charged numbers for the Rest of Europe
+49 180 567 1083
+49 40 23773 4899
User Support E-mail address in Europe
dss.support@olympus-europa.com
Technical Assistance and Support
U1-BZ8231-03
AP0706
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus WS-321M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus WS-321M in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info