459952
6
Zoom out
Zoom in
Previous page
1/10
Next page
6
EN
Cancel the segment repeat playback
function:
To cancel the segment repeat
playback, press either STOP (4),
REC (s), 9, or the 0 button.
"
If you press and hold
0 and
rewind past the start position,
or press and hold 9 and fast
forward past the end position, the
segment repeat playback will be
canceled.
Erasing
1 Select the file you want to erase.
2 While the recorder is during stop
mode, press the
ERASE
button.
File number and [NO] will flash
on the display.
3 Press the 0 button to select
[
y
ES
].
4 Press the `
OK
button.
Erasing begins and [ERASE]
flashes on the display.
Erasing all files in a folder:
1 Select the folder you want to erase.
2 While the recorder is during stop
mode, press the
ERASE
button.
3 Press the
ERASE
button again.
[ALL] and [NO] will flash on the
display.
4 Press the 0 button to select
[
y
ES
].
5 Press the `
OK
button.
Erasing begins and [ERASE]
flashes on the display.
"
Locked files cannot be erased.
If an action is not selected within 8
seconds, the recorder will return to
stop mode.
It may take over 10 seconds to
complete processing. Never
remove batteries during this time
because data may be corrupted.
In addition, carefully check the
remaining battery level in order to
ensure that the battery will not run
out while processing.
You cannot delete folders with this
recorder.
Setting an index mark
1 While the recorder is during
recording mode or playback mode,
press the
FOLDER/INDEX
button.
Index number
Even after an index mark is
placed, recording or playback
will continue so you can place
index marks in other locations in
a similar manner.
Clearing an index mark:
While the index number appears
for approximately 2 seconds on the
display, press the ERASE button.
Erasing an index mark will make
the index number after it move up
automatically.
"
Up to 16 index marks can be set
in a file. If you try to place more
than 16 index marks, the [FULL]
message will be displayed.
Index marks cannot be set or
erased in a locked file.
LCD display information
While the recorder is during stop
mode, pressing and holding the
STOP (4) button will make the
display switch information in the
following order:
Current date
Current time
Remaining recording time
Current date …
While the recorder is during recording
mode, pressing the DISP/MENU
button will make the display switch
information in the following order:
Elapsed recording time
Remaining recording time
Elapsed recording time …
While the recorder is during stop
mode or playback mode, pressing
the DISP/MENU button will make
the display switch information in the
following order:
Count up
Count down
Recording date Recording time
Count up …
Menu setting method
You can set each menu item as follows.
1 While the recorder is during
stop mode, press and hold the
DISP/MENU
button.
2 Press the + or button to move to
the item you want to set.
3 Press the 9 or 0 button to
change the setting.
4 Press the `
OK
or +/ button to
set.
5 Press the
STOP
(4) button to close
the menu screen.
The setting menu icons on the
display will turn on.
1
2
3
4
5
6
7
8
9
1 File lock
2 Recording mode
3 Microphone sensitivity
4 VCVA
5 Timer recording
6 Noise cancel
7 Continuous playback
8 Alarm playback
9 Repeat playback
"
The recorder will stop if you leave
it idle for 3 minutes during a menu
setup operation, when a selected
item is not applied.
Recording mode [MODE]
[HQ]: High quality sound recording.
[SP]: Standard recording.
[LP]: Long-term recording.
"
To record a meeting or a lecture
clearly, set other than [LP].
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus VN7600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus VN7600 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus VN7600

Olympus VN7600 User Manual - German - 10 pages

Olympus VN7600 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info