459944
6
Zoom out
Zoom in
Previous page
1/165
Next page
9
EN
• If you press the STOP (4) button
during a menu setup operation,
the recorder will stop and apply the
items that were set to that point.
Recording Modes [HQ SP LP]
The recording mode can be chosen
from [HQ] (high quality sound
recording), [SP] (standard recording)
and [LP] (long-term recording).
In Menu mode selection...[HQ], [SP], [LP]
VN-7500 VN-6500 VN-5500
HQ
Approx.
81 h.
Approx.
40 h.
30 min.
Approx.
20 h.
5 min.
SP
Approx.
215 h.
50 min.
Approx.
107 h.
55 min.
Approx.
53 h.
40 min.
LP
Approx.
1208 h.
30 min.
Approx.
604 h.
15 min.
Approx.
300 h.
30 min.
1 Current recording mode (Fig. i)
• The recording time shown above
is for one continuous file. The
available recording time may be
shorter than speci ed if several  les
are recorded. (Use the remaining
time and recorded time only as
references.)
Microphone Sensitivity [
h
]
Microphone sensitivity is adjustable to
meet your recording needs.
In Menu mode selection...[g], [i]
gi
High-sensitivity
mode that records
sounds in all
directions
Low-sensitivity
mode suited for
dictation
To ensure successful recording, make
a test recording to select appropriate
microphone sensitivity before
recording.
If you select [g], we recommend
setting the recording mode to [HQ]
to best take advantage of the higher
sensitivity.
If you select [ g], background
noise may be high depending on the
recording conditions.
1 Current microphone sensitivity
(Fig. o)
Using the Variable Control
Voice Actuator [VCVA]
When the microphone senses that
sound has reached a preset volume,
the built-in Variable Control Voice
Actuator (VCVA) starts recording
automatically, and stops it when the
volume drops.
Particularly helpful for extended
recording, the VCVA not only
conserves memory by turning off
recording during silent periods, but
also makes playback more efficient
and convenient.
In Menu mode selection...[On], [OFF]
• During recording, press the + and
buttons to adjust the VCVA level
in 15 levels.
The record/play indicator light is lit
during recording. When the recorder
is in Standby mode, the Record/Play
indicator light  ashes and [VCVA]
ashes on the display.
1 VCVA indicator (Fig. ;)
System Sounds [BEEP] (Fig. a)
Informs a button operation or a wrong
operation of the recorder by sound.
System sounds may be turned off.
In Menu mode selection...[On], [OFF]
• If the alarm playback function has
been set, the alarm will sound at the
scheduled time even if the system
sounds are disabled.
Alarm Playback Function [
k
]
You can use the alarm playback
function to sound the alarm tone
for 5 minutes at the scheduled time.
Within this 5 minutes, pressing any
button other than the HOLD switch
starts the recorder to playback the
preselected file.
In Menu mode selection...[SET], [On],
[OFF]
After selecting [SET], press the PLAY
(`) button to set the time.
With the alarm playback function, only
one  le can be played back. Select a
le for the function before setting the
time.
1 Alarm indicator (Fig. s)
To cancel an alarm playback:
For [k] in the menu mode, select [OFF] and
press the PLAY (`) button.
• Regardless of the selected folder,
once the alarm playback is set,
it operates every day unless the
setting is canceled.
• To view the current setting, select
[On], and press the PLAY (`) button.
The alarm tone stops automatically
if no button is pressed within 5
minutes after the alarm starts. The
le is not played back in this case.
If the recorder has no recorded  le
in the selected folder, the alarm
playback function is not available.
• Alarm playback occurs every day
unless it is set to [OFF].
Timer Recording [TIMER]
You can schedule for automatic
recording, specifying the start time
and end time of recording. When the
timer-controlled recording completes,
the setting is released.
In Menu mode selection...[SET], [On], [OFF]
After selecting [SET], press the PLAY
(`) button to set the time.
1 Timer indicator (Fig. d)
To cancel the timer setting:
For the timer in the menu mode, selec t [OFF],
and press the PLAY (`) button.
• To view the current setting, select
[On], and press the PLAY (` )
button.
With this function, you can set
only the start and the end time of
recording. The current settings of
the recording mode, microphone
sensitivity, VCVA and folder are
applied for the settings before you
set timer-controlled recording.
The setting exceeding the remaining
recording time is not allowed.
You can record at any time even if it
is not within the speci ed recording
duration. However, if that makes
the remaining recording time
insu cient for the timer-controlled
recording, the recording will not
complete.
If any operation is ongoing, the
timer-controlled recording is
overridden.
Other Functions
Moving File between Folders
You can move files recorded in folders
[F], [G], [H] and [I] to other folders.
The moved file is added to the end of
the destination folder.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus VN6500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus VN6500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info