Manual Olympus VN1000 (page 2 of 2) (English)

18644

Zoom out

Zoom in

1/2

2005.4.15 BZ8117T4 INST EN 1

For customers in North and South America

USA RFI

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment gen-

erates, uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications. How-

ever, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian RFI

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the Radio Interference Regulations of the Canadian Depart-

ment of Communications.

Cet appareil numérique ne dépasse pas les limites de Catégorie B pour les émissions de

bruit radio émanant d’appareils numériques, tel que prévu dans les Règlements sur

l’Interférence Radio du Département Canadien des Communications.

For customers in Europe

“CE” mark indicates that this product complies with the European

requirements for safety, health, environment and customer protection.

Recording Modes (HQ SP LP)

You can select from among three recording modes: HQ (High Quality)

mode, SP (Standard Playback) mode and LP (Long Playback) mode.

In Menu mode selection... HQ, SP, LP

• The recording time shown above is for one continuous file. The available recording time may be shorter than

specified if several files are recorded. (Use the remaining time and recorded time only as references.)

Microphone Sensitivity (HI LOW)

Microphone sensitivity is adjustable to meet your recording needs.

In Menu mode selection... HI, LOW

HI: High-sensitivity mode that records sounds in all directions.

LOW:Low-sensitivity mode suited for dictation.

• To ensure successful recording, make a test recording to choose appropriate

microphone sensitivity before recording.

• If you choose HI, we recommend setting the recording mode to HQ or SP to

best take advantage of the higher sensitivity.

• If you choose HI, background noise may be high depending on the recording

conditions.

Using The Variable Control Voice Actuator

(VCVA)

When the microphone senses that sounds have reached a preset

volume, the built-in Variable Control Voice Actuator (VCVA) starts

recording automatically, and stops it when the volume drops.

Particularly helpful for extended recording, the VCVA not only conserves

memory by turning off recording during silent periods, but also makes

playback more efficient and convenient.

In Menu mode selection... ON, OFF

• The Recording/playing lamp is lit during recording. When the recorder is in

Standby mode, the Recording/playing lamp flashes and “VCVA” flashes on the

display.

System Sounds (BEEP)

The recorder beeps to alert you to button operations or warn you of

errors. System sounds may be turned off.

In Menu mode selection... ON, OFF

• If the alarm playback function has been set, the alarm will sound at the sched-

uled time even if the system sounds are disabled.

Erasing from Folder S

To erase S folder, select S folder, and then press the ERASE button repeatedly to select

your desired erasing mode. Each time you press the ERASE button, the erasing mode

changes in the following order: by file

→

by date

→

by month

→

by folder

→

disabled.

Erasing One File at a Time in a Date Subfolder

1 Press the FOLDER button to select the folder S.

2 Press the + or – button to select the date subfolder.

3 Press the PLAY button.

4 Press the + or – button to select the file to be erased.

5 Press the STOP button.

6 Press the ERASE button.

7 Press the + or – button to select the “YES”.

8 Press the ENTER button.

Sequential file numbers are reassigned automatically.

Erase All Files in a Date Subfolder

1 Press the FOLDER button to select the folder S.

2 Press the + or – button to select the date subfolder to be

erased.

3 Press the ERASE button twice.

4 Press the + or – button to select the “YES”.

5 Press the ENTER button.

Erase All Files in a Month Subfolder

1 Press the FOLDER button to select the folder S.

2 Press the ERASE button three times.

3 Press the STOP or PLAY button to select the month subfolder

to be erased.

4 Press the ENTER button.

5 Press the + or – button to select the “YES”.

6 Press the ENTER button.

Erase All Files in the S Folder

1 Press the FOLDER button to select the folder S.

2 Press the ERASE button four times.

3 Press the + or – button to select the “YES”.

4 Press the ENTER button.

Note

If you leave the recorder untouched for 8 seconds or longer before you press the ENTER button,

Clear mode will be canceled, and the recorder will enter Stop mode.

General Precautions

Read this manual carefully to ensure that you know how to operate it safely and correctly.

Keep this manual in an easily accessible location for future reference.

• The warning symbols indicate important safety related information. To protect yourself and oth-

ers from personal injury or damage to property, it is essential that you always read the warnings

and information provided.

Warning regarding data loss

Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction, or

during repair work. For important recorded content, we recommend you to write it down somewhere.

For safe And Correct Usage

• Do not leave the recorder in hot, humid locations such as inside a closed automobile

under direct sunlight or on the beach in the summer.

• Do not store the recorder in places exposed to excessive moisture or dust.

• Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.

• Do not place the recorder on top of or near electric appliances such as TVs or refrigera-

tors.

• Avoid sand or dirt. These can cause irreparable damage.

• Avoid strong vibrations or shocks.

• Do not disassemble, repair or modify the unit yourself.

• Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart).

• Keep the unit out of the reach of children.

Batteries

Warning

• Batteries should never be exposed to flame, heated, short-circuited or disassembled.

• Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.

• Never use any battery with a torn or cracked outer cover.

• Keep batteries out of the reach of children.

• If you notice anything unusual when using this product such as abnormal noise, heat,

smoke, or a burning odor:

1 remove the batteries immediately while being careful not to burn yourself, and;

2 call your dealer or local Olympus representative for servicing.

Troubleshooting

Q1 Nothing happens when a button is pressed.

A1 • The HOLD button may be set to HOLD.

• The batteries may be depleted.

• The batteries may be inserted incorrectly.

Q2 No sound or quiet sound is heard from the speaker while playing back.

A2 • The earphone plug may be plugged into the recorder.

• The volume may be set to the minimum level.

Q3 Recording is not possible.

A3 By pressing the STOP button repeatedly while the recorder stops, check if the

display shows:

• The remaining recording time in the selected folder may have reached

“00:00”.

• The number of files is 100

Check if the display shows FULL by pressing the REC button.

The number of files of the same date in folder S may have reached 10.

Q4 The playback speed is too fast (slow).

A4 The recorder may be set to Fast (slow) Playback.

Q5 The remaining recording time seems too short.

A5 Some files may be stored in the S folder. Hold the STOP button while in the S folder.

The display will show the total number of recordings in the S folder.

Q6 You cannot move the file.

A6 • The number of recorded files in the destination folder may have reached 100.

• Make sure that you haven’t transferred to or from the S folder.

2,4

Basic operation of the menu mode

1 Press and hold the MENU button for 1 second or longer

while the recorder is stopped.

2 Press the STOP or PLAY button to select what you would

like to set up.

The selected menu item flashes.

3 Use the + or – button to change the setting.

4 Press the ENTER button to confirm the setting.

5 Press the MENU button to close the menu.

1,5

Other Function

Moving File Between Folders

You can move files recorded in folders A, B and C to other folders. The

moved file is added at to the end of the destination folder.

1 Choose the file you want to transfer and press the PLAY button

to play it.

2 Press and hold the FOLDER button for 1 second or longer

while the file is playing.

3 Press the + or – button to choose a destination folder.

4 Press the ENTER button.

The destination folder and the number of the moved file appear on

the display, and moving is completed.

• If the destination folder is full (100 files), “FULL” appears on the display, and you cannot move the file to

that folder.

• You cannot move files between folder S and the other folders.

Index Marks

Index marks can be placed in a file during recording or playback to

provide and quick and easy way of keeping track of important sections

in the file.

1 Press the INDEX button during recording (pause recording) or

playback to set an index mark.

An index number appears on the display.

Clearing an Index Mark

Press the ERASE button while the index number appears for 2 seconds

on the display.

• Up to 10 index marks can be set in a file.

• Sequential index marks numbers are reassigned automatically.

Note

If you leave the recorder untouched for 8 seconds or longer before you press the ENTER button,

Clear mode will be canceled, and the recorder will enter Stop mode.

Notes

• The recorder will stop if you leave it idle for 3 minutes during a menu setup

operation, when a selected item is not applied.

• If you press the MENU button during a menu setup operation, the recorder

will stop and apply the items that were set to that point.

a Microphone

sensitivity

display

a VCVA indicator

a Destination

folder

b Destination

number of the

file

– 6 – – 7 – – 8 – – 9 – – 10 –

Erase Menu Other Function

Erasing One File at a Time

1 Press the FOLDER button to

select folder A, B, or C.

2 Press the + or – button to select the

file to be erased.

3 Press the ERASE button.

4 Press the + or – button to select the

“YES”.

5 Press the ENTER button.

Erase All Files from a Folder

1 Press the FOLDER button to select

folder.

2 Press the ERASE button twice.

3 Press the + or – button to select the

“YES”.

4 Press the ENTER button.

Erasing from Folder A, B or C

You can easily erase unnecessary files. Sequential file numbers are reassigned

automatically.

Menu setting screen

Move the selection one position up/increase the number.

Move the selection one position down/decrease the number.

Move the selection one

position to the right.

Move the selection one

position to the left.

a Current

recording

mode

Alarm Playback Function (

)

You can use the alarm playback function to sound the alarm tone for 5 minutes

at the scheduled time. Within this 5 minutes, pressing any button other than

the HOLD switch starts the recorder to play back the pre-selected file.

In Menu mode selection... SET, ON, OFF → After selecting SET,

press the ENTER button to set the time.

With the alarm playback function, only one file can be played back.

Select a file for the function before setting the time. For S folder, all files

contained in the selected date subfolder are played back.

To cancel an alarm playback

For in the menu mode, select OFF and press the ENTER button.

• Regardless of the selected folder, once the alarm playback is set, it operates every day unless the

setting is canceled.

• To view the current setting, select ON, and then press the ENTER button.

• The alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts. The

file is not played back in this case.

• If the recorder has no recorded file in the selected folder, the alarm playback function is not available.

• Alarm playback occurs every day unless it is set to OFF.

• Even if no file is recorded in the day’s date subfolder, the beeps will sound. In such a case, no sound is

heard even if you press some button while the alarm is sounding.

Timer Recording (TIMER)

You can schedule for automatic recording, specifying the start time and end time of recording.

When the timer-controlled recording completes, the setting is released.

In Menu mode selection... SET, ON, OFF → After selecting SET, press the ENTER

button to set the time.

To cancel the timer setting

For the timer in the menu mode, select OFF, and then press the ENTER button.

• To view the current setting, select ON, and then press the ENTER button.

• With this function, you can set only the start and the end time of recording. The current settings of the

recording mode, microphone sensitivity, VCVA and folder are applied for the settings before you set

timer-controlled recording.

• The setting exceeding the remaining recording time is not allowed.

•

You can record at any time even it is not within the specified recording duration. However, if that makes the

remaining recording time insufficient for the timer-controlled recording, the recording will not complete.

• If any operation is ongoing, the timer-controlled recording is overridden.

a Alarm

indicator

Resetting the Recorder (CLEAR)

This function resets the current time and other settings to their initial

status. It is useful if you are having problems with the recorder, or if you

want to erase the entire memory of the recorder.

1 Hold the STOP button, and hold the ERASE button for 3

seconds or longer.

2 Press the + or – button to select the “YES”.

3 Press the ENTER button.

Note

If you leave the recorder untouched for 8 seconds or longer before you press the ENTER button in Step 3,

Clear mode will be canceled, and the recorder will enter Stop mode.

Specifications

Recording medium: Built-in flash memory

Recording time: VN-1000 (32 MB)

HQ mode: Approx. 210 min

SP mode: Approx. 440 min

LP mode: Approx. 1000 min

VN-2000 (64 MB)

HQ mode: Approx. 430 min

SP mode: Approx. 890 min

LP mode: Approx. 2000 min

Microphone: Electret Condenser Microphone (monaural)

Speaker: Built-in ø 28 mm round dynamic speaker

Maximum power: 120 mW

Earphone jack (monaural): ø 3.5 mm diameter, impedance 8 Ω

Microphone jack (monaural): ø 3.5 mm diameter, impedance 2 kΩ

Power supply: Two AAA (LR03 or R03) batteries or

Two Ni-MH rechargeable batteries

Continuous battery use time: Alkaline batteries: About 30 hours

Ni-MH rechargeable batteries: About 20 hours

Dimensions: 99 (L) × 39 (W) × 21.5 (T) mm

Weight: 66.5 g (including batteries)

* Battery life is measured by Olympus. It varies greatly according to the type of batteries

used and the conditions of use.

* Your recorded contents are for your personal use or pleasure only. It is prohibited to record

copyrighted material without permission of the copyright holders according to copyright

law.

* Specifications and design are subject to change without notice for improvement of perfor-

mance.

Accessories (Optional)

Ni-MH Rechargeable Battery Charger: BU-400 (Europe only)

Ni-MH Rechargeable Battery: BR401

Connecting cord (Earphone jack ↔ Microphone jack): KA333

Noise-Cancellation microphone: ME12

Electret condenser microphone: ME15

Headset: E99

Telephone pickup: TP7

Using the menu function, you can change various settings according to your preference.

HQ SP LP

VN-1000 Approx.210min Approx.440min Approx.1000min

VN-2000 Approx.430min Approx.890min Approx.2000min

Mode

Model

This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection

of waste electrical and electronic equipment in the EU countries. Please do not throw

the equipment into the domestic refuse. Please use the return and collection systems

available in your country for the disposal of this product.

Applicable Product : VN-1000/2000

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympus VN1000 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympus VN1000 Manual

Product: