444845
3
Zoom out
Zoom in
Previous page
1/12
Next page
3
- -
Notes:
You can choose between 12 and 24 hour display by pressing the
DISP/MENU button while setting
the hour and minute.
You can change the order of the date indication by pressing the
DISP/MENU button while you
are setting the year, month, or day.
h Power Supply
hHold
Setting the HOLD switch to the direction of the arrow holds the current status, and all button
operations are disabled. Remember to release the HOLD switch to use the recorder.
4 Press the 9 or 0
button to select the item
to set.
Select the item from Month”,
Day,Year ”, “Hour and
Minute with a flashing
point.
Replacing the Batteries:
When [N] appears on the display, replace the batteries as soon as possible. Size-AAA alkaline
batteries are recommended. When the batteries are depleted, [O] appears on the display, and
the recor-der shuts off.
To replace the battery, make sure that you set the
HOLD switch to the opposite direction of the
arrow before replacing.
Power on
: Slide the
HOLD
switch in the direction
opposite that indicated by the arrow.
Power off
: Slide the
HOLD
switch in the
direction indicated by the arrow while the
recorder is not in operation.
Standby Mode and Display Shut Off:
If the recorder is stopped for 5 minutes or longer during
recording or playing, it goes into Standby (power-save)
mode, and the display shuts off. To exit Standby mode
and turn on the display, press any button.
2 Press the 9 or 0
button to select
[
Sub Menu
].
3 Press the
PLAY
/
OK
(`)
button.
[Time & Date] appears on the
display, and [
\^]
] flashes.
5 Press the
+
or button to
set.
Follow the same steps by press-
ing the 9 or 0 button to
elect the next item, and press
the + or button to set.
6 Press the
PLAY
/
OK
(`)
button to complete the
setup screen.
The clock will start from the set
date and time.
Press the
PLAY/OK (`) button
according to the time signal.
7 Press the
STOP
(4 ) button to close the menu
mode.
This completes the time and date setup procedure.
1 Press and hold the
DISP
/
MENU
button for 1
second or longer to go to the main menu.
h Setting Time and Date [
Time & Date
]
If you have set the time and date, information as to when a sound file was recorded is stored
automatically with that file.
When you install batteries for the first time or each time you replace the batteries, the
“Month” indication will flash. In such a case, be sure to set the time and date by following
steps 4 through 6 described below.
Time & Date
12:00
AM
1. 1‘08
12:00
AM
1. 1‘08
3:00
PM
7.25‘08
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus VN-6800PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus VN-6800PC in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus VN-6800PC

Olympus VN-6800PC User Manual - German - 12 pages

Olympus VN-6800PC User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info