471058
56
Zoom out
Zoom in
Previous page
1/124
Next page
56
EN
Other shooting options
2
Recording multiple exposures in a single image
(multiple exposure)
Record multiple exposures in a single image, using the option currently selected for
image quality.
1
Select [Multiple Exposure] in shooting menu X (P. 107).
2
Adjust settings.
Multiple Exposure
Off
Off
Frame
Auto Gain
Overlay
Off
Back Set
Frame Select [2f].
Auto Gain
When set to [On], the brightness of each
frame is set to 1/2 and the images are
overlaid. When set to [Off], the images
are overlaid with the original brightness
of each frame.
Overlay
When set to [On], a RAW image
recorded on a card can be overlaid with
multiple exposures and stored as a
separate image. The number of pictures
taken is one.
a is displayed in the monitor while multiple exposure
is in effect.
3
Take pictures.
a is displayed in green when shooting starts.
Press D to delete the last shot.
The previous shot is superimposed on the view through
the lens as a guide to framing the next shot.
250 F5.6
ISO
400
L
N
0.00.0
01:02:0301:02:03
3838
P
HD
% Tips
To overlay 3 or more frames: Select RAW for [K] and use the [Overlay] option to make
repeated multiple exposures.
For more information on overlaying RAW images: g “Image overlay” (P. 68)
# Cautions
The camera will not go to sleep while multiple exposure is in effect.
Photographs taken with other cameras can not be included in a multiple exposure.
When [Overlay] is set to [On], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
To set the shooting functions, cancel multiple exposure shooting rst. Some functions
cannot be set.
Multiple exposure is cancelled automatically from the rst picture in the following
situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The
shooting mode is set to a mode other than P, A, S, M/The battery power runs out/
Any cable is connected to the camera/You switch between the monitor and electronic
view nder
When a RAW image is selected using [Overlay], the JPEG image for the image recorded
in JPEG+RAW is displayed.
When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
S0038_E_Print.indb 56S0038_E_Print.indb 56 2011/06/09 11:33:002011/06/09 11:33:00
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus Pen E-PL3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus Pen E-PL3 in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info