9538
140
Zoom out
Zoom in
Previous page
1/170
Next page
Troubleshooting
140
10
Appendix
(When the camera is connected to a computer or printer
Pictures you have taken do not appear on the monitor.
The power is off. Set the mode dial to q or X, then press the
POWER switch to turn the camera on.
P.12
The camera is in the
shooting mode.
Press the QUICK VIEW button or set the
mode dial to q or X.
P.12, 14
There are no pictures on
the card.
“NO PICTURE” is displayed on the monitor.
Record pictures.
There is a problem with
the card.
See “Error codes”. P.134
The camera is
connected to a TV.
The monitor does not function when the AV
cable is connected to the camera.
P.84
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
Display pictures with 9 and set [0] from
[MODE MENU] to [OFF] to cancel protection.
P.88
No picture is displayed on the TV when connected to the camera.
The video output signal
is incorrect.
Set the video output signal according to the
region where used.
P.85
The TV video signal
setting is incorrect.
Set the TV to the video input mode. P.84
The monitor is hard to see.
The brightness of the
monitor is not adjusted
properly.
Select [s] in the mode menu and adjust the
brightness.
P.97
The monitor is exposed
to direct sunlight.
Block the sunlight with your hand.
Possible cause Corrective action
Ref.
page
The printer fails to connect.
PC was selected on the
monitor after connecting
the camera to the printer
with the USB cable.
Remove the USB cable, and start again from
Step 1 of “Connecting the camera to a
printer”.
P.103
The printer does not
support PictBridge.
Refer to the printer’s instruction manual or
contact the manufacturer.
The camera is not recognized by the computer.
The USB driver has not
been installed.
Install OLYMPUS Master.
Possible cause Corrective action
Ref.
page
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus Mju DIGITAL 500 Reference manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus Mju DIGITAL 500 Reference manual in the language / languages: English as an attachment in your email.

The manual is 11,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info