9560
90
Zoom out
Zoom in
Previous page
1/100
Next page
2
26
50
74
ENGLISH
Shoot and Play!
B
a
s
i
c
M
a
n
u
a
l
DIGITAL CAMERA
d4221_basic_e_00_bookfile_7.book Page 1 Thursday, November 4, 2004 11:50 AM
2
En
For customers in North and South America
For customers in Europe
“CE” mark indicates that this product complies with the European requirements
for safety, health, environment and customer protection. “CE” mark cameras
are intended for sales in Europe.
For customers in USA
Declaration of Conformity
Model Number : Stylus 500/
Trade Name : OLYMPUS
Responsible Party :
Address : Two Corporate Center Drive, PO Box 9058, Melville, NY
11747-9058 U.S.A.
Telephone Number : 1-631-844-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
FCC Notice
Radio and Television Interference
Change or modifications not expressly approved by the manufacturer may void the
user’s authority to operate this equipment. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Adjust or relocate the receiving antenna.
- Increase the distance between the camera and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
- Consult your dealer or an experienced radio/TV technician for help. Only the
OLYMPUS-supplied USB or cable should be used to connect the camera to USB
enabled personal computers (PC).
Any unauthorized changes or modifications to this equipment would void the user’s
authority to operate.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
d4221_basic_e_00_bookfile_7.book Page 2 Thursday, November 4, 2004 11:50 AM
3
En
Manual Contents
How to use the camera .................................................. 4
Safety Precautions ......................................................... 6
Weatherproof feature ..................................................... 9
UNPACKING THE BOX CONTENTS...................10
CHARGING THE BATTERY .............................12
INSERTING THE BATTERY AND CARD .............. 13
TURNING THE CAMERA ON ...........................16
TAKING A PICTURE......................................18
REVIEWING A PICTURE ................................20
TURNING THE CAMERA OFF ..........................21
Specifications ............................................................... 22
d4221_basic_e_00_bookfile_7.book Page 3 Thursday, November 4, 2004 11:50 AM
4
En
Navigation
How to use the camera
Using a card...
Pictures taken with this
camera are stored on a
xD-Picture Card. By
storing the relevant print
reservation data with the
images on the card, you
can print pictures at a
photo shop or on a
PictBridge-compatible
printer.
Using a computer...
Using the OLYMPUS Master
software on your computer lets you
enjoy editing, viewing, and printing
the pictures downloaded from your
camera.
Using a printer...
With a PictBridge-compatible
printer, you can print pictures
directly from your camera.
Using a TV...
You can use a TV to view
pictures or playback
movies from your camera.
d4221_basic_e_00_bookfile_7.book Page 4 Thursday, November 4, 2004 11:50 AM
5
En
Using the arrow pad and e
button...
The arrow pad and e button are for
selecting and setting menu options as well
as viewing pictures frame by frame.
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
SELECT
GO
OK
EXIT
DRIVE
ESP5
ISO
AF MODE
CARD
SET
CAMERA
AUTO
SPOT
OFF
ESP
DIGITAL ZOOM
Using the menus...
Shooting and playback-related
functions are set from the menus
displayed on the monitor.
Using the mode dial...
Use the mode dial to select a shooting or
playback mode.
Using the direct buttons...
f lets you select the optimum settings
for the shooting conditions.
Direct buttons also let you perform functions
such as setting the flash mode or taking the
close-up pictures or self-timer, making
camera operation easy.
d4221_basic_e_00_bookfile_7.book Page 5 Thursday, November 4, 2004 11:50 AM
6
En
Safety Precautions
Read All Instructions — Before you use the product, read all operating
instructions.
Save These Instructions — Save all safety and operating instructions for future
reference.
Heed Warnings — Read carefully and follow all warning labels on the product and
those described in the instructions.
Follow Instructions — Follow all instructions provided with this product.
Cleaning — Always unplug this product from the wall outlet before cleaning. Use
only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner,
or any type of organic solvent to clean this product.
Attachments — For your safety, and to avoid damaging the product, use only
accessories recommended by Olympus.
Water and Moisture — Never use this product around water (near a bathtub,
kitchen sink, laundry tub, wet basement, swimming pool or in the rain). For
precautions on products with weatherproof designs, read the weatherproofing
sections of their manuals.
Location — To avoid damage to the product and prevent personal injury, never
place this product on an unstable stand, tripod, bracket, table or cart. Mount
only on a stable tripod, stand, or bracket. Follow the instructions that describe
how to safely mount the product, and use only the mounting devices
recommended by the manufacturer.
Power Sources — Connect this product only to the power source described on
the product label. If you are not sure about the type of power supply in your
home, consult your local power company. Refer to your operating instructions
for information on using the product with a battery.
Grounding, Polarization — If this product can be used with a specified AC
adapter, the adapter may be equipped with a polarized alternating current line
General Precautions
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated voltage
points inside the product which could cause a serious electrical shock.
An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in
the documentation provided with the product.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE THIS PRODUCT TO WATER OR
OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
d4221_basic_e_00_bookfile_7.book Page 6 Thursday, November 4, 2004 11:50 AM
Safety Precautions
7
En
plug (a plug with one blade wider than the other). This safety feature allows the
plug to fit into the power outlet only one way. If you cannot insert the plug into
the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to
fit, contact an electrician and have the receptacle replaced.
Protecting the Power Cord — The power supply cord should be placed so it will
not be walked on. Never put a heavy object on the power cord or wrap it around
the leg of a table or chair. Keep the area around the power cord connection
points, at the power outlet, and at the product connection, free of all AC adapter
or accessory power cords.
Lightning — If a lightning storm occurs while using the specified AC adapter,
unplug it from the wall outlet immediately. To avoid damage from unexpected
power surges, always unplug the AC adapter from the power outlet and
disconnect it from the camera when the camera is not in use.
Overloading — Never overload wall outlets, extension cords, power strips, or
other power connection points with too many plugs.
Foreign Objects, Liquid Spillage — To avoid personal injury caused by fire or
electrical shock from contact with internal high voltage points, never insert a
metal object into the product. Avoid using the product where there is a danger
of spillage.
Heat — Never use or store this product near any heat source such as a radiator,
heat register, stove, or any type of equipment or appliance that generates heat,
including stereo amplifiers.
Servicing — Refer all servicing to qualified personnel. Attempting to remove the
covers or disassemble the product, could expose you to dangerous high
voltage points.
Damage Requiring Service — If you notice any of the conditions described below
while using the specified AC adapter, unplug it from the wall outlet and refer
servicing to qualified service personnel:
a) Liquid has been spilled onto the product or some other object has fallen into
the product.
b) The product has been exposed to water.
c) The product does not operate normally despite following operating
instructions. Adjust only the controls described in the operating instructions
as improper adjustment of other controls could damage the product and
require extensive repair work by a qualified technician.
d) The product has been dropped or damaged in any way.
e) The product exhibits a distinct change in performance.
Replacement Parts — When replacement parts are required, make sure that the
service center uses only parts with the same characteristics as the originals, as
recommended by the manufacturer. Unauthorized substitution of parts could
result in fire, electrical shock, or create other hazards.
Safety Check — Upon completion of servicing or repairs, ask the service
technician to perform safety checks to determine that the product is in good
working order.
d4221_basic_e_00_bookfile_7.book Page 7 Thursday, November 4, 2004 11:50 AM
Safety Precautions
8
En
Legal and other notices
Olympus makes no representations or warranties regarding any damages, or
benefit expected by using this unit lawfully, or any request from a third person,
which are caused by the inappropriate use of this product.
Olympus makes no representations or warranties regarding any damages or
any benefit expected by using this unit lawfully which are caused by erasing
picture data.
Disclaimer of Warranty
Olympus makes no representations or warranties, either expressed or implied,
by or concerning any content of these written materials or software, and in no
event shall be liable for any implied warranty of merchantability or fitness for any
particular purpose or for any consequential, incidental or indirect damages
(including but not limited to damages for loss of business profits, business
interruption and loss of business information) arising from the use or inability to
use these written materials or software or equipment. Some countries do not
allow the exclusion or limitation of liability for consequential or incidental
damages, so the above limitations may not apply to you.
Olympus reserves all rights to this manual.
WARNING
Unauthorized photographing or use of copyrighted material may violate applicable
copyright laws. Olympus assumes no responsibility for unauthorized
photographing, use or other acts that infringe upon the rights of copyright owners.
Copyright Notice
All rights reserved. No part of these written materials or this software may be
reproduced or used in any form or by any means, electronic or mechanical,
including photocopying and recording or the use of any type of information storage
and retrieval system, without the prior written permission of Olympus. No liability
is assumed with respect to the use of the information contained in these written
materials or software, or for damages resulting from the use of the information
contained therein. Olympus reserves the right to alter the features and contents of
this publication or software without obligation or advance notice.
Trademarks
IBM is a registered trademark of International Business Machines Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Macintosh is a trademark of Apple Computer Inc.
All other company and product names are registered trademarks and/or
trademarks of their respective owners.
The standards for camera file systems referred to in this manual are the “Design
Rule for Camera File System/DCF” standards stipulated by the Japan
Electronics and Information Technology Industries Association (JEITA).
d4221_basic_e_00_bookfile_7.book Page 8 Thursday, November 4, 2004 11:50 AM
9
En
Weatherproof feature
This camera is weatherproof, but it cannot be used underwater.
Olympus will not assume any responsibility for malfunction of the camera
caused by water getting inside as a result of misuse by the user.
The camera is weatherproof and is not damaged by water spray from any
direction.
Observe the following precautions when using the camera.
Water may get inside the camera if the battery compartment/card cover or
connector cover are not firmly closed so close them firmly.
If the camera gets splashed, wipe the water off as soon as possible with
a dry cloth.
• The rechargeable battery and other camera accessories are not
weatherproof.
Do not wash the
camera with water.
Do not drop the
camera into water.
Do not take pictures
underwater.
Battery compartment/
card cover
o
n
Connector
cover
d4221_basic_e_00_bookfile_7.book Page 9 Thursday, November 4, 2004 11:50 AM
10
En
UNPACKING THE BOX CONTENTS
If you find any contents missing or damaged, contact the place of purchase.
Contents vary depending on the area where you purchased this camera.
Digital Camera Strap
Card
LI-12B Lithium Ion Battery LI-10C Battery Charger
USB Cable
AV Cable
OLYMPUS Master CD-ROM
Basic Manual (this manual)
Advanced Manual
(CD-ROM)
Warranty Card
Registration Card
d4221_basic_e_00_bookfile_7.book Page 10 Thursday, November 4, 2004 11:50 AM
UNPACKING THE BOX CONTENTS
11
En
1
Attach the strap as shown.
Note
Be careful with the strap when you carry the camera, as it can easily catch on
stray objects, causing injury or damage.
Do not swing the camera around by the strap or pull the strap with excessive
force as this may cause the strap to break.
Attach the strap correctly as shown above so that the camera does not fall off.
If the strap is attached incorrectly and the camera falls off, Olympus is not
responsible for any damages.
Attaching the strap
Pull the strap tight so that it does not come loose.
d4221_basic_e_00_bookfile_7.book Page 11 Thursday, November 4, 2004 11:50 AM
12
En
CHARGING THE BATTERY
The battery is not fully charged at the time of purchase. Charge the
battery fully with the LI-10C charger before use.
1
Connect the power cable.
2
Insert the battery into the charger.
TIPS
The LI-12B battery takes approximately 120 minutes to charge.
Note
This camera uses an Olympus LI-12B/LI-10B lithium ion battery. No other
type of battery can be used.
Use only the specified charger.
Battery life varies depending on shooting conditions, etc.
The charger can be used within the range of AC100V to AC240V (50/60Hz).
When using the charger abroad, you may need a plug adapter to convert the
plug to the shape of the AC wall outlet. For details, ask at your local electrical
shop or travel agent.
Do not use voltage converters sold in stores traveling overseas as this could
damage your charger.
LI-10C battery charger
Power cable
AC wall outlet
n
o
S mark
LI-12B
lithium ion battery
Charging indicator
When charging starts, the indicator lights red.
When fully charged, the indicator turns green.
d4221_basic_e_00_bookfile_7.book Page 12 Thursday, November 4, 2004 11:50 AM
13
En
INSERTING THE BATTERY AND CARD
1
Make sure the camera is off.
2
Open the battery compartment/card cover.
3
Insert the battery.
The lens is retracted.
The monitor is off.
The lamp is off.
Battery compartment/card cover
Slide
Lift
o
n
Battery lock knob
To remove the battery
Slide the lock knob as
shown. The battery pops up
allowing you to grasp it.
Battery lock
knob
The battery is locked into place
when inserted correctly.
d4221_basic_e_00_bookfile_7.book Page 13 Thursday, November 4, 2004 11:50 AM
INSERTING THE BATTERY AND CARD
14
En
4
Insert the card.
Note
The card may not record properly if it is not inserted all the way in.
Releasing your finger quickly after pushing the card all the way in may
cause it to eject forcefully out of the slot.
5
Close the battery compartment/card cover.
Â
Notch
Index area
Make sure that the card is
oriented correctly and
insert until it clicks while
keeping it straight,
otherwise the contacts on
the card may be damaged
or the card may get stuck.
Grasp and remove.
To remove the card
Push the card all the way in and
release slowly.
Close
Slide
o
n
Press down on the center of the cover when sliding.
d4221_basic_e_00_bookfile_7.book Page 14 Thursday, November 4, 2004 11:50 AM
INSERTING THE BATTERY AND CARD
15
En
Note
The amount of power consumed by the camera varies considerably
depending on shooting conditions, etc.
Power is consumed continuously during the conditions described below. This
discourages the power from lasting longer.
When the monitor is in playback mode for an extended period of time.
Repeated zoom adjustments.
Repeated auto focus by depressing the shutter button halfway.
When connected to a computer or printer.
If you use an exhausted battery, the camera may turn off without displaying
the battery level warning.
This camera uses an xD-Picture Card (16 – 512MB).
Note
This camera may not recognize a non-OLYMPUS card or a card that was
formatted on another device (such as a computer, etc.). Before use, be sure
to format the card on this camera.
Do not press on the card with hard or pointed items such as ballpoint pens.
Never open the battery compartment/card cover, or remove the card or the
battery while the camera is turned on. Doing so could destroy the data stored
on the card. Once destroyed, data cannot be restored.
Do not place a sticker or label on the card as this could prevent the card from
being ejected.
The battery
The card
Index area
You can use this space to write the contents of the card.
Contacts
The part where the data transferred from the camera
enters the card.
d4221_basic_e_00_bookfile_7.book Page 15 Thursday, November 4, 2004 11:50 AM
16
En
TURNING THE CAMERA ON
1
Set the mode dial to K and press the POWER
switch.
Note
To save battery power, the camera automatically enters the sleep mode and
stops operating after about 3 minutes of non-operation. The camera activates
again as soon as you operate the shutter button or zoom button.
15 minutes after the camera enters sleep mode, the camera retracts the lens
and turns off automatically. Turn the camera on to use.
HQ
HQ
2560
2560
1920
1920
30
30
30
o
Mode dial
POWER switch
Battery check indicator
Shooting scene/Shooting mode
The lens extends and the
monitor turns on.
d4221_basic_e_00_bookfile_7.book Page 16 Thursday, November 4, 2004 11:50 AM
TURNING THE CAMERA ON
17
En
The battery check indicator changes according to how much power is
remaining.
The first time you use the camera, "Y/M/D"
is displayed prompting you to enter the date
and time. See "Setting the date and time" in
Chapter 7 of the Advanced Manual. The
camera operates without making this
setting.
The language for on-screen display varies
depending on the area where you
purchased this camera. The language for
on-screen display in Basic Manual and
Advanced Manual is the same as the box
description. To change the language, refer
to the "Selecting a language" in Chapter 7
of the Advanced Manual.
Turning on the camera for the first time
Battery power
Lit (green)
(Disappears after a while.)
Ready to shoot.
No power is left. Charge the
battery.
Blinking (red)
The battery needs charging
soon.
ef
“BATTERY EMPTY”
is displayed.
Setting the date and time
Y/M/D
Language for on-screen display
ENGLISH
FRANCAIS
PORTUGUES
ESPAÑOL
SELECT GO
OK
d4221_basic_e_00_bookfile_7.book Page 17 Thursday, November 4, 2004 11:50 AM
18
En
TAKING A PICTURE
1
Compose your picture.
2
Focus on your subject.
HQ
HQ
30
30
30
2560
2560
1920
1920
o
AF target mark
Using the monitor, place the AF
target mark on your subject.
Shutter button
Lamp
HQ
HQ
30
30
30
2560
2560
1920
1920
o
2560
2560
1920
1920
o
# mark
Green lamp
The green lamp lights when the
focus and exposure are locked
(Focus lock).
The # mark lights when the
flash is about to fire.
Press the shutter button
halfway and hold.
d4221_basic_e_00_bookfile_7.book Page 18 Thursday, November 4, 2004 11:50 AM
TAKING A PICTURE
19
En
3
Take the picture.
Note
Press the shutter button gently. If it is pressed hard, the camera may move
and pictures may come out blurred.
Never open the battery compartment/card cover, remove the battery or
disconnect the AC adapter while the lamp on the camera is blinking red. Doing
so could destroy stored pictures and prevent storage of pictures you have just
taken.
Recorded pictures are saved on the card regardless of whether the camera
is turned off or the battery is replaced or removed.
When taking pictures against strong backlight, the area of the picture in
shadow may appear colored.
Every time you press the shutter button, the memory gauge lights indicating
that the picture you have just taken is being recorded onto the card. The
memory gauge changes according to how many pictures the camera is
processing. This indicator is not displayed while recording movies.
The lamp on the camera blinks
red while the picture is recorded
onto the card.
HQ
HQ
30
30
30
2560
2560
1920
1920
o
2560
2560
1920
1920
o
b
Memory gauge
Press the shutter button
completely.
Memory gauge
a b c d
Before taking
any pictures
(Off)
Maximum reached
(All lit)
Wait until the indicator
turns off again before
taking more pictures.
After taking one
picture
(Lit)
After taking
several pictures
(Lit)
Shoot Shoot Shoot
Wait
d4221_basic_e_00_bookfile_7.book Page 19 Thursday, November 4, 2004 11:50 AM
20
En
REVIEWING A PICTURE
1
Press the QUICK VIEW button.
2
Use the arrow pad to display the picture you want.
HQ
HQ
100
100
-
0030
0030
$05.02.16 15:30
$05.02.16 15:30
30
30
You can display the last picture
you took while staying in any
shooting mode.
Press the QUICK VIEW button
again or press the shutter
button lightly when you are
ready to take another picture.
QUICK VIEW button
Next picture
Previous picture
10 pictures back
10 pictures forward
d4221_basic_e_00_bookfile_7.book Page 20 Thursday, November 4, 2004 11:50 AM
21
En
TURNING THE CAMERA OFF
1
Press the POWER switch.
POWER switch
The monitor turns off.
The lens retracts.
Now that you have mastered how to shoot and
play, check out the Advanced Manual for more
camera applications.
…And for extra enjoyment, install OLYMPUS
Master image editing software on the supplied
CD-ROM.
d4221_basic_e_00_bookfile_7.book Page 21 Thursday, November 4, 2004 11:50 AM
22
En
Specifications
Camera
Product type : Digital camera (for shooting and displaying)
Recording system
Still picture : Digital recording, JPEG (in accordance with Design rule
for Camera File system (DCF))
Applicable standards
: Exif 2.2, Digital Print Order Format (DPOF), PRINT Image
Matching III, PictBridge
Sound with still pictures
:Wave format
Movie : QuickTime Motion JPEG support
Memory : xD-Picture Card (16 – 512 MB)
No. of storable pictures
(when a 32 MB card is
used)
: Still picture (without sound)
Record mode Image size Card capacity in
number of pictures
SHQ
2560 × 1920
8 frames
HQ 26 frames
SQ1 2048 × 1536 40 frames
SQ2
1600 × 1200 48 frames
1280 × 960 76 frames
1024 × 768 117 frames
640 × 480 180 frames
Movie (with sound)
Record mode
Image size
Remaining recording time
HQ
320 × 240
(15 frames/sec.)
1 min. 23 sec
SQ
160 × 120
(15 frames/sec.)
3 min. 31 sec
No. of storable pictures
when a new battery is
used (fully charged)
: Approx. 200 frames
(based on CIPA battery life measurement standards)
No. of effective pixels : 5,000,000 pixels
Image pickup device : 1/2.5" CCD (primary color filter)
Lens : Olympus lens 5.8 mm to 17.4 mm, f3.1 to f5.2,
(equivalent to 35 mm to 105 mm lens on a 35 mm
camera)
Photometric system : Digital ESP metering, spot metering system
Shutter speed : 1/2 to 1/1000 sec. (max. 4 sec. in Night scene mode)
Shooting range : 0.5 m (1.6 ft.) to ) (normal)
0.2 m (0.7 ft.) to ) (macro mode)
0.07 m (2.8") to 0.5 m (1.6 ft.) (T only) (super macro mode)
Monitor : 2.5" TFT color LCD display, 215,000 pixels
d4221_basic_e_00_bookfile_7.book Page 22 Thursday, November 4, 2004 11:50 AM
Specifications
23
En
Flash charging time :
Approx. 4 seconds (fully charged new battery is used, and
the charging time is measured in the normal temperature
after a full flashing.)
Outer connector : DC-IN jack, USB connector (Multi-connector),
A/V OUT jack (Multi-connector)
Automatic calendar system
: 2000 up to 2099
Weatherproof
Type : Equivalent to IEC Standard publication 529 IPX4
(under OLYMPUS test conditions)
Meaning : Camera is not damaged by water spray from any
direction.
Operating environment
Temperature : 0°C to 40°C (32°F to 104°F) (operation)
-20°C to 60°C (-4°F to 140°F) (storage)
Humidity : 30% to 90% (operation)/10% to 90% (storage)
Power supply : Only an Olympus LI-12B lithium ion battery
AC adapter specified by Olympus (optional)
Dimensions : 99 mm (W) × 55.5 mm (H) × 31 mm (D)
(3.8" × 2.2" × 1.2") (excluding protrusions)
Weight : 165 g (0.4 lb.) (without battery and card)
xD-Picture Card
Memory type : NAND flash EEP-ROM
Operating environment
Temperature : 0°C to 55°C (32°F to 131°F) (operation)
-20°C to 65°C (-4°F to 149°F) (storage)
Humidity : 95% or lower
Power : 3V (3.3V)
Dimensions : 20 × 25 × 1.7 mm (0.8" × 1.0" × 0.1")
LI-12B Lithium ion Battery
Type : Lithium ion rechargeable battery
Standard voltage : DC 3.7V
Standard capacity : 1,230 mAh
Battery life : Approx. 300 full recharges (varies on usage)
Recommended
temperature
: 0°C to 40°C/32°F to 104°F (charging)
-10°C to 60°C/14°F to 140°F (operation)
0°C to 30°C/32°F to 86°F (storage)
Dimensions : 31.9 × 45.8 × 10 mm (1.3" × 1.8" × 0.4")
Weight : Approx. 36 g/1.2 oz.
d4221_basic_e_00_bookfile_7.book Page 23 Thursday, November 4, 2004 11:50 AM
Specifications
24
En
LI-10C Battery Charger
Power requirements : AC 100 to 240V (50 to 60 Hz)
9 VA (100V) to 16 VA (240V)
Output : DC 4.2V 860 mA
Charging time : Approx. 120 minutes
Recommended
temperature
: 0°C to 40°C/32°F to 104°F (operation)
-20°C to 60°C/-4°F to 140°F (storage)
Dimensions : 46 × 37.5 × 86 mm (1.8" × 1.5" × 3.4")
Weight : Approx. 75 g/2.6 oz. (without battery)
Design and specifications subject to change without notice.
d4221_basic_e_00_bookfile_7.book Page 24 Thursday, November 4, 2004 11:50 AM
25
En
Memo
d4221_basic_e_00_bookfile_7.book Page 25 Thursday, November 4, 2004 11:50 AM
26
Kr
*
인증내역
*
1. 기기명칭(모델명):DIGITAL STILL CAMERA
(Stylus 500/µ DIGITAL 500)
2. 인증받은자의 상호:올림푸스한국()
3. 제조자:
사용자 안내문
기기는 가정용으로 전자파 적합등록을 기기로서
주거지역에서는 물론 모든 지역에서 사용할 있습니다.
d4221_basic_kr_00_bookfile_7.book Page 26 Tuesday, November 2, 2004 10:13 PM
27
Kr
사용 설명서 목차
카메라 사용법............................................................... 28
안전 주의 사항.............................................................. 30
생활방수 기능............................................................... 33
상자 내용물 꺼내기 ...................................................... 34
배터리 충전 .................................................................. 36
배터리 카드 삽입 ..................................................... 37
카메라 켜기 .................................................................. 40
사진 촬영...................................................................... 42
사진 확인...................................................................... 44
카메라 끄기 .................................................................. 45
제품 사양...................................................................... 46
d4221_basic_kr_00_bookfile_7.book Page 27 Tuesday, November 2, 2004 10:13 PM
30
Kr
안전 주의 사항
모든 지침을 읽으십시오제품을 사용하기 전에 모든 작동 지침을 읽으십시오.
이 지침들을 보관하십시나중에 참고할 있도록 모든 안전 작동 상의
침들을 보관하십시오.
경고에 주의하십시오제품에 붙어 있는 경고 라벨 지침에 기술되어 있는
고를 모두 주의 깊게 읽고 따르십시오.
지침을 따르십시오제품 제공되는 모든 지침들을 따르십시오.
청소청소를 하기 전에 항상 콘센트에서 제품의 플러그를 빼십시오. 청소할
축축한 천만 사용하십시오. 제품을 청소할 때는 용액, 분무식 클리너 또는
형태의 유기 용제를 절대 사용하지 마십시오.
부속물고객의 안전과 제품 손상 방지를 위해 Olympus에서 권장하는 액세서리
사용하십시오.
물과 습기 제품은 근처(욕조, 부엌 싱크대, 세탁용 물통, 습기가 많은 지하
, 수영장 등의 근처 또는 )에서 절대 사용하지 마십시오. 방수 설계된
품들의 주의 사항에 대해선 관련 사용 설명서의 방수 부분을 읽어 보시기 바랍
니다.
위치 선정제품 손상을 예방하고 상해를 막기 위해 제품을 불안정한 스탠드,
각대, 선반, 탁자 또는 짐수레에 절대로 올려 놓지 마십시오. 안정된 삼각대,
탠드 또는 선반 위에만 올려 놓으십시오. 제품을 안전하게 설치하는 방법을
명하는 지침을 준수하고 제조업체 권장하는 설치 장비만 사용하십시오.
전원 제품은 제품 라벨에 기술되어 있는 전원에만 연결하십시오. 집에서
용하는 전원의 종류를 모를 경우 지역 전력 회사에 문의하십시오. 배터리를
이용한 제품 사용 방법에 대한 정보는 작동 지침들을 참조하십시오.
일반적인 주의 사항
주의: 감전 위험을 줄이려면 커버(또는 뒷면) 제거하지 마십시오.
사용자가 수리할 있는 부분이 아닙니다.
공인된 OLYMPUS 서비스 담당자에게 문의하십시오.
삼각형 내의 화살촉을 가진 번쩍이는 번개 모양은 제품 내부에
절연되지 않은 전압점이 있어 심각한 감전을 유발할 있으므로 주의를 요하는 부분입니다.
삼각형 내의 느낌표는 제품과 함께 제공된 설명서에서 설명하고 있는 중요한 작동 유지관리 지침에 대한
주의를 요하는 부분입니다.
경고!
제품을 물에서 젖게 하거나 다습한 환경에서 작동시키지 마십시오. 화재 또는 감전이 발생할 있습니다.
주의
감전 위험이 있습니다.
열지 마십시오.
d4221_basic_kr_00_bookfile_7.book Page 30 Tuesday, November 2, 2004 10:13 PM
안전
주의
사항
31
Kr
접지, 양극화 제품을 지정 AC 어댑터와 함께 사용할 있다면 해당 어댑
터에는 양극화 되어 있는 교류 라인 플러그( 날이 다른 날에 비해 넓은
플러그) 장착되어 있을 것입니다. 안전 기능은 플러그가 콘센트에 한쪽
향으로만 끼워지도록 합니. 콘센트에 플러그가 끼워지지 않으면 플러그를
뒤집은 다음 다시 끼우십시오. 그래도 플러그가 끼워지지 않으면 전기 기사
불러 소켓을 교체하십시오.
전원 코드 보호전원 코드는 밟히지 않는 곳에 배치해야 합니다. 전원 코드에
무거운 물체를 올려 놓거나 탁자나 의자 다리에 전원 코드를 감아 두지 마십
시오. 전원 콘센트 제품의 전원 코드 연결 지점 주변의 AC 어댑터나 액세서리
전원 코드는 모두 치우십시오.
번개지정된 AC 어댑터를 사용하는 동안 번개를 동반한 폭풍이 몰아치는 경우
에는 어댑터를 콘센트에서 즉시 분리하십시오. 예기치 않은 전압 증가로 인한
상을 피하기 위해 항상 AC 어댑터를 전원 콘센트에서 뽑아 두고 카메라 사용
하고 있지 않을 때는 카메라와 분리해 두십시오.
과부하콘센트, 확장 코드, 파워 스트립, 또는 기타 전원 연결 장치에 너무 많은
플러그를 사용해 과부하를 유발하지 마십시오.
이물질, 용액 유출내부 고전압 부품과의 접촉으로 인한 화재나 감전에 의해
인적인 부상을 당하는 일을 피하기 위해 제품 안에 절대 금속 물체를 삽입하
마십시오. 용액 유출 위험이 있다면 제품 사용 삼가해 주십시오.
난방기, 조절장치, 스토브와 같은 열원 또는 스테레오 앰프를 포함해 열을
발생시키는 모든 종류의 장비 처에서 제품을 사용하거나 보관하지 마십시
.
서비스모든 서비스는 서비스 센터에 문의하십시오. 커버 제거나 제품 분해를
도할 경우 위험한 높은 전압에 노출될 있습니다.
서비스가 필요한 손상지정된 AC 어댑터를 사용하는 도중 아래 설명 하나가
발생할 경우 콘센트에서 어댑터 뽑고 서비스를 요청하십시오.
a) 제품에 용액이 쏟아졌거나 다른 물체가 제품에 엎어졌습니다.
b) 제품이 물에 노출되었습니다.
c) 작동 지침을 준수하였음에도 불구하고 제품이 정상적으로 작동하지 않습니
. 작동 지침 설명되어 있는 카메라제어만 조정하십시오. 다른 카메라제어
잘못 조정할 경우 제품 손상되어 공인 기술자에게 광범위한 수리 맡겨
수도 있습니다.
d) 제품을 떨어뜨렸거나 어떤 형태로든 손상되었습니다.
e) 제품 성능이 크게 달라졌습니다.
부품 교환부품 교환이 필요한 경우 서비스 센터가 제조업체에서 권장하는 원래
부품과 동일한 특성을 가진 부품들만 사용하도록 하십시오. 승인되지 않은
부품 교체는 화재, 감전을 유발하거나 기타 상해를 발생시킬 있습니다.
안전 검사서비스나 수리를 끝낸 엔지니어에게 제품이 제대로 작동하는지
인을 요청하십시오.
d4221_basic_kr_00_bookfile_7.book Page 31 Tuesday, November 2, 2004 10:13 PM
안전
주의
사항
32
Kr
법률 기타 공지 사항
Olympus 장치를 정당하게 사용함으로써 예상되는 모든 손실, 이익 또는
제품의 부적절한 사용으로 인해 유발된 삼자의 요청과 관련해 어떤 진술이나
보증도 하지 않습니다.
Olympus 사진 데이터 삭제 의해 유발되는 장치의 합법적 사용에 의해
상되는 모든 손실이나 이익과 관련 어떤 진술이나 보증도 하지 않습니다.
보증의 거부
Olympus 서면 자료 또는 소프트웨어의 여하한 내용을 통해, 또는 내용
관련해 어떠한 명시적이거나 묵시적인 기술 또는 보증도 하지 않습니다.
울러 어떤 경우에도 상업성 또는 특정 목적에의 적합성 또는 서면 자료 또는
소프트웨어나 장치의 사용 또는 사용 불가능으로부터 유발된 모든 우발적, 필연
또는 간접적 손실(비즈니스 이익의 손실, 비즈니스 중단 비즈니스 정보
등을 포함하며 이에 국한되지 않음) 묵시적 보증에 대해 책임지지 않습
. 일부 가에서는 필연적이거나 우발적인 손실 대한 책임의 배제나 제한
허용하지 않으므로 위의 제한은 귀하에게 적용되지 않을 수도 있습니다.
Olympus 사용 설명서에 대한 모든 권한을 갖고 있습니다.
경고
허가 받지 않은 사진 촬영이나 저작권이 있는 자료의 사용은 적용 가능한 저작권법
침해할 있습니다. Olympus 허가 받지 않은 사진 촬영, 저작권 소유자의
한을 침해하는 사용 또는 기타 행위에 대해 아무런 책임도 없습니다.
저작권 공지 사항
모든 판권 소유합니다. 서면 자료나 소프트웨어의 어떤 부분도 Olympus
허가 없이는 사진 복사 기록 또는 여하한 형태의 정보 저장 검색 시스템
용을 포함 어떤 형태와 수단, 전기 또는 기계적 수단으로도 복사하거나 사용할
없습니다. 서면 자료나 소프트웨어의 사용, 또는 여기에 포함되어 있는 정보의
사용으로 인한 손실과 관련해 어떤 책임도 지지 않습니다. Olympus 책임 또는
공지 없이 출판물이나 프트웨어의 특징 내용을 변경할 있는 권한을
갖고 있습니다.
등록 상표
•IBM International Business Machines Corporation 등록 상표입니다.
•Microsoft Windows Microsoft Corporation 등록 상표입니다.
•Macintosh Apple Computer Inc 상표입니다.
밖의 모든 상호 제품명은 관련 소유자의 등록 상표 /또는 상표입니다.
설명서에서 언급된 카메 파일 시스템용 표준은 일본 전자정보기술산업협
(JEITA) 규정한 "DCF(Design Rule for Camera File System; 카메라 파일
스템용 디자인 규격)" 준입니다.
d4221_basic_kr_00_bookfile_7.book Page 32 Tuesday, November 2, 2004 10:13 PM
33
Kr
생활방수 기능
카메라는 생활방수 기능을 가지고 있으나 속에서는 사용할 없습
니다.
Olympus 사용자의 실수로 인해 카메라 내부에 물이 들어가 카메라가
고장난 경우 책임을 지지 않습니다.
카메라는 생활방수 기능을 가지고 있으며 어느 방향에서 물이 뿌려져
손상되지 않습니다.
카메라 사용 시에는 다음 주의 사항을 지켜주시기 바랍니다.
카메라 내부로 수분이 들어갈 있으므로 배터리부/카드 커버 또는 커넥터
커버를 단단히 닫으십시오.
카메라에 물이 경우 가능한 빨리 마른 천으로 물을 닦아 내십시오.
충전 배터리 기타 카메라 액세서리에는 생활방수 기능이 없습니다.
물로 카메라를 씻지
마십시오.
물에 카메라를 떨어
뜨리지 마십시오.
속에서 촬영하지
마십시오.
배터리부
/
카드
커버
n
o
커넥터
커버
d4221_basic_kr_00_bookfile_7.book Page 33 Tuesday, November 2, 2004 10:13 PM
34
Kr
상자 내용물 꺼내기
누락되었거나 손상된 내용물이 발견되면 판매점에 문의하십시오.
내용물은 카메라의 구입장소에 따라 다릅니다.
디지털 카메라 스트랩 카드
LI-12B 리튬 이온 배터리 LI-10C 배터리 충전기 USB 케이블
AV 케이블
OLYMPUS Master CD-ROM
기본편
( 설명서)
고급편
(CD-ROM)
보증서
d4221_basic_kr_00_bookfile_7.book Page 34 Tuesday, November 2, 2004 10:13 PM
상자
내용물
꺼내기
35
Kr
1
그림과 같이 스트랩을 부착하십시오.
참고
카메라를 스트랩에 끼워 소지할 때에는 스트랩이 튀어나온 물건에 걸려서
처나 손상을 입을 있으니 주의하시기 바랍니다.
힘을 세게 주어 스트랩을 잡아 당기거나 스트랩을 잡고 카메라를 돌리면 스트
랩이 끊어질 있습니다.
스트랩을 위의 그림에 따라 정확히 연결하여 카메라가 떨어지지 않도록 하십
시오. 스트랩을 잘못 연결하여 카메라가 떨어질 경우 Olympus 어떠한 손상
대해서도 책임을 지지 않습니다.
스트랩 연결
스트랩이 느슨해지지 않도록 단단히 당기십시오.
d4221_basic_kr_00_bookfile_7.book Page 35 Tuesday, November 2, 2004 10:13 PM
36
Kr
배터리 충전
구입 배터리는 완전히 충전되어 있지 않습니다. 사용하기 전에 LI-10C
충전기를 이용해 배터리를 완전히 충전시키십시오.
1
전원 케이블을 연결하십시오.
2
충전기에 배터리를 끼우십시.
LI-12B 배터리의 충전 소요 시간은 120분입니다.
참고
카메라는 Olympus LI-12B/LI-10B 리튬 이온 배터리를 사용합니다. 다른
류의 배터리는 사용할 없습니다.
지정된 충전기만 사용하십시오.
배터리 수명은 촬영 여건 등에 따라 달라집니다.
충전기는 AC100V ~ AC240V (50/60Hz) 범위내에서 사용할 있습니다.
전기를 해외에서 사용할 때는 플러그를 AC 콘센트의 모양에 맞게 변환하기
플러그 어댑터가 필요합니다. 자세한 사항은 지역 전자제품 판매점이나
행사에 문의하십시오.
해외 여행 도중 상점에서 판매되는 변압기는 충전기를 손상시킬 있으므로
사용하지 마십시오.
LI-10C 배터리 충전기
전원 케이블
AC 콘센트
n
o
S 표시
LI-12B
리튬 이온 배터리
충전 표시등
충전이 시작되면 표시등에 빨간불이 켜집니다.
완전 충전이 되면 표시등이 녹색으로 바뀝니다.
d4221_basic_kr_00_bookfile_7.book Page 36 Tuesday, November 2, 2004 10:13 PM
37
Kr
배터리 카드 삽입
1
카메라 전원이 꺼져 있는지 확인합니다.
2
배터리부/카드 커버를 엽니다.
3
배터리를 삽입합니다.
렌즈가 들어가 있습니다.
모니터가 꺼져 있습
니다.
배터리부/카드 커버
램프가 꺼져 있습니다.
밉니다
들어 올립니다
o
n
배터리 잠금장치
배터리를 분리하려면
그림과 같이 잠금장치를 밉니
. 배터리를 꺼낼 있도록
배터리가 튀어 나옵니다.
배터리 잠금
장치
배터리를 올바로 삽입하면 위치에
가서 잠깁니다.
d4221_basic_kr_00_bookfile_7.book Page 37 Tuesday, November 2, 2004 10:13 PM
배터리
카드
삽입
38
Kr
4
카드를 삽입합니다.
참고
카드를 완전히 눌러 삽입하지 않으면 제대로 기록되지 않을 수도 있습
니다.
카드를 누르고 있다가 갑자기 손을 떼면 카드가 슬롯에서 튀어나올
있습니다.
5
배터리부/카드 커버를 닫으십시.
카드의 방향이 올바른지
인하고 딸각 소리가 때까
똑바로 밀어 넣으십시
. 그렇지 않으면 카드의
접촉면이 손상되거나 카드
끼어 빠지지 않을
습니다.
Â
인덱스 부분
잡고 꺼냅니다.
카드를 분리하려면
카드를 완전히 눌렀다가 천천히
놓습니다.
닫습니다
밉니다
o
n
때는 커버 가운데를 누르십시오.
d4221_basic_kr_00_bookfile_7.book Page 38 Tuesday, November 2, 2004 10:13 PM
배터리
카드
삽입
39
Kr
참고
카메라가 소비하는 전력량은 촬영 조건 등에 따라 차이가 있을 있습니다.
다음과 같은 상태에서는 전원이 지속적으로 소비됩니다. 경우 전원이 오래
지속되지 못합니다.
모니터가 장시간 재생 모드에 있을
조절을 반복적으로 사용할
셔터 버튼을 반누름하여 자동 초점 기능을 반복 사용할
컴퓨터나 프린터에 연결했을
소진된 배터리를 사용하면 배터리 부족 경고가 표시되지 않고 카메라가 꺼질
있습니다.
카메라는 xD-Picture Card (16 – 512MB) 사용합니다.
참고
다른 장치(컴퓨터 ) 포맷한 카드나 OLYMPUS 이외의 카드는 인식하지
있습니다. 따라서 카드를 사용하기 전에 카메라로 포맷하십시오.
볼펜 등과 같이 딱딱하거나 뾰족한 물건으로 카드를 누르지 마십시오.
카메라가 켜져 있을 때는 절대 배터리부/카드 커버를 열거나, 카드나 배터리를
꺼내지 마십시오. 경우 카드에 저장된 데이터가 손상될 있습니다. 손상
데이터는 복구할 없습니다.
카드가 배출되지 않을 있으므로 카드에 스티커나 라벨을 붙이지 마십시오.
배터리
카드
인덱스 부분
부분을 사용해 카드의 내용을 있습니다.
접촉면
카메라로부터 전송된 데이터가 카드에 입력되는 부분.
d4221_basic_kr_00_bookfile_7.book Page 39 Tuesday, November 2, 2004 10:13 PM
40
Kr
카메라 켜기
1
모드 다이얼을
K
설정한 POWER 스위치를 누르
십시오.
참고
카메라는 배터리 전원 절약을 위해, 3 동안 사용하지 않으면 자동으로
절전 모드로 전환되어 작동이 중지됩니다. 셔터 버튼 또는 버튼을 누르는
즉시 카메라가 다시 작동됩니다.
카메라가 절전 모드로 전환된 15분이 지나면 자동으로 렌즈가 들어가고
원이 꺼집니다.
모드 다이얼
POWER 스위치
배터리 점검 표시
촬영 장면/촬영 모드
렌즈가 돌출되고 모니터가
켜집니다.
HQ
HQ
2560
2560
1920
1920
30
30
30
o
d4221_basic_kr_00_bookfile_7.book Page 40 Tuesday, November 2, 2004 10:13 PM
카메라
켜기
41
Kr
배터리 점검 표시등은 남아 있는 전력량에 따라 변경됩니다.
카메라를 처음으로 사용할 날짜와 시간을
입력할 있도록 "Y/M/D" 표시됩니다. 고급
편의 7 "날짜와 시간 설정" 참조하십시
. 설정을 하지 않으면 카메라가 작동하지
않습니다.
화면 표시용 언어는 카메라를 구입한 지역
따라 다릅니다. 기본편 고급편에서는
그림에 보이는 것과 같은 화면 표시용 언어
사용되었습니다. 언어를 변경하려면
급편의 7 "언어 선택" 참조하십시오.
처음으로 카메라 전원 켜기
배터리 전원
ef
점등(녹색)
(잠시 사라짐)
촬영할 준비가 되었습니다.
남은 전력이 없습니. 배터리
충전하십시오.
깜박임(적색)
배터리를 금방 충전해야
합니다.
"배터리 없음"
이라고 표시됩니다.
날짜와 시간 설정
Y/M/D
화면 표시용 언어
ENGLISH
Ԟࡾ ۀʚ
OK
d4221_basic_kr_00_bookfile_7.book Page 41 Tuesday, November 2, 2004 10:13 PM
42
Kr
사진 촬영
1
사진 구도를 잡습니다.
2
피사체에 초점을 맞추십시오.
HQ
HQ
30
30
30
2560
2560
1920
1920
o
AF 타겟 표시
모니터를 사용해 피사체에 AF 타겟
표시를 올려 놓으십시오.
셔터 버튼
램프
HQ
HQ
30
30
30
2560
2560
1920
1920
o
2560
2560
1920
1920
o
# 표시
녹색 램프
초점과 노출이 잠겨 있을 녹색
프에 불이 들어옵니다(초점 잠금).
플래시가 발광할 준비가 되면 # 표시
켜집니다.
셔터 버튼을 반누름한 상태로 유지합
니다.
d4221_basic_kr_00_bookfile_7.book Page 42 Tuesday, November 2, 2004 10:13 PM
90
Ct
拍攝影像
1
取景。
2
聚焦被攝對象。
HQ
HQ
30
30
30
2560
2560
1920
1920
o
AF 對象標誌
使用液晶顯示屏,將 AF 對象標誌
置於被攝對象上。
快門鈕
指示燈
HQ
HQ
30
30
30
2560
2560
1920
1920
o
2560
2560
1920
1920
o
# 標誌
綠色燈
聚焦和曝光被鎖定時,綠色燈點亮
(聚焦鎖定)。
在閃光燈將要閃光時,
#
標誌點亮。
半按下快門鈕並按住。
d4221_basic_ct_00_bookfile_7.book Page 90 Wednesday, November 3, 2004 11:15 AM
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus Mju-40 DIGITAL Basic manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus Mju-40 DIGITAL Basic manual in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info