538315
78
Zoom out
Zoom in
Previous page
1/86
Next page
78
Other Information
6
Troubleshooting
Symptom Probable cause Action
No t hin g ap p ear s on t h e
display
The batteries are not loaded properly.
Verify that the batteries’ polarities = and
- are correct (P.11).
Battery power is getting low.
Replace with new batteries (P.11).
The power is off.
Turn the power on (P.13).
Won’t start
Battery power is getting low.
Replace with new batteries (P.11).
The power is off.
Turn the power on (P.13).
The recorder is in HOLD mode.
Release the recorder from HOLD ( P.13).
Unable to record
Low remaining memory.
Erase unnecessary files ( P.38).
The maximum number of files has
been reached.
Change to the another folder
(P.19 to P.21, P.23).
The SD Card is set to write protection.
Undo the SD Card’s write protection setting
and then try again (P.18).
No sound picked up by the
built-in microphone
An external microphone or external
device is connected.
Detach all external microphones and
external devices connected to the LINE IN
jack and the MIC jack ( P.30, P.31).
Unable to record through an
external microphone
An external device is connected to the
LINE IN jack.
Detach the connecting cord from the
recorder.
An external microphone supported by
plug-in power is connected but [Plug-in
Power] is set to [Off].
Set [Plug-inPower] to [On] when an
external microphone supported by plug-in
power is connected
( P.41, P.44).
No playback tone heard
The earphone is connected.
Unplug the earphones to use the internal
speaker.
The volume level is set to [0].
Adjust the volume level ( P.32).
Recording level too low
The recording level has not been ad-
justed.
Adjust the recording level and then try
recording once more ( P.26).
The microphone sensitivity is too low.
Set the microphone sensitivity to [HIGH]
mode and try again ( P.27).
This could potentially be because the
recording level and output level for the
connected external devices are too low.
If you cannot record clearly even after
adjusting the recording level, then adjust the
output level for the connected devices
( P.23).
Recording level too high
The recording level has not been ad-
justed.
Adjust the recording level and then try
recording once more ( P.23).
This could potentially be because the
recording level and output level for con-
nected external devices are too high.
If you cannot record clearly even after
adjusting the recording level, then adjust the
output level for the connected devices
( P.23).
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus LS-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus LS-11 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus LS-11

Olympus LS-11 User Manual - German - 86 pages

Olympus LS-11 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info