776153
26
Zoom out
Zoom in
Previous page
1/220
Next page
26
EN
4 Press the shutter button the rest of the way down to take the picture.
• The AUTO CHECK lamp blinks for about 5 s after shooting to indicate that
the ash has red successfully.
When using a ash, ash light may be blocked by the lens body, lens hood, etc.
• The ash may become hot when red many times in succession, resulting in
damage or malfunction. The ash should be red no more than 50 times in
succession at intervals of 2.5 seconds, after which it should be left unused for
at least 10 minutes.
Test FlashTest Flash
To re a test ash, press the TEST button while the CHARGE lamp is lit. The
AUTO CHECK lamp blinks for about 5 s to indicate that the ash has red
successfully. If the lamp does not blink, adjust settings or change the distance to
the subject.
Choosing a Flash Control Mode Choosing a Flash Control Mode
Choose a ash control mode according to your subject and shooting conditions.
1 Press the MODE button.
• Settings will be displayed.
2 Rotate the dial to choose a ash control mode. SetValue OKDIAL
Gno
40
MODE
M
• The ash control mode can also be selected by pressing the MODE button.
• Related settings (if displayed) can be highlighted by pressing HI and
changed by rotating the dial.
3 Press the OK button to put the changes into effect.
Flash Control Modes Flash Control Modes
Flash Control
Mode
Control panel
display
Control operation
TTL-AUTO
MODE LEDZOOM
TTL
A
mm250.0 OFF
A
RANGE
0.7~8.0 m
The ash light intensity is controlled
automatically according to the camera’s
setup. The ash will be adjusted based on
the brightness taken through the camera’s
lens. Usually use this mode with a camera
with communication capability.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus FL-900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus FL-900R in the language / languages: English, German, French, Polish, Spanish, Finnish as an attachment in your email.

The manual is 3.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info