777000
7
Zoom out
Zoom in
Previous page
1/36
Next page
46 47
Displayed according to the
focal distance of the lens.
<AUTO>
In this mode, the flash light intensity is controlled automatically according to the lens iris (F)
setting and the amount of light input to the auto light receptor.
Light control range
1. The control panel shows the light control range according
to the camera setup.
The light control range is not displayed if the camera setup
(ISO speed and lens iris (F)) does match one of the us-
able ISO speed/lens iris (F) combinations.
In this case, the ISO and F indicators blink to alert you.
Change the camera setup (ISO speed and/or lens iris (F)).
2. Confirm that the distance to the subject is within the light
control range.
If not, adjust the lens iris (F) or the subject distance.
The light control range varies according to the camera setup
(ISO speed, lens iris (F) and lens focal length (ZOOM)).
Memo: Test flash activation
Flash activation can be tested before actually releasing
the shutter.
Press the Test button for test flash activation.
The light control is OK when the AUTO CHECK lamp blinks
for about 5 seconds after the test flash activation.
If the lamp does not blink, change the lens iris (F), ISO
speed, subject distance, etc.
The light check by means of test flash activation is pos-
sible only in the AUTO mode.
Light control range
<TTL AUTO>
In this mode, pre-flash is performed to measure the optimum flash intensity and then actual flash
is performed.
Displayed according to the
focal length of the lens.
1. The control panel shows the light control range according
to the camera setup.
2. Confirm that the distance to the subject is within the light
control range.
If not, adjust the lens iris (F) or the subject distance.
The light control range varies according to the camera type
and camera setup (ISO speed, lens iris (F) and lens focal
distance (ZOOM)).
3. When flash activation has been performed correctly, the
AUTO CHECK lamp blinks for about 5 seconds after the
shutter is released.
Combinations of ISO speeds and lens irises
controllable in AUTO mode
3. When flash activation has been performed correctly, the
AUTO CHECK lamp blinks for about 5 seconds after the
shutter is released.
Light intensity adjustment
The flash light intensity can be adjusted between +3 and –3.
The light intensity adjustment must be set to ON in the
custom setup operation (page 61).
The indicator appears in the control panel.
1. Tu rn dial B to select a light intensity adjustment value in
the following steps.
(This selection is also possible with dial A.)
0 +0.3 +0.7+1.0 ... +3.0
0 –0.3 –0.7–1.0 ... –3.0
2. The display shows the light intensity adjustment value ex-
cept when the value is 0, in which case the display does
not show the light control range.
3. If the camera’s flash adjustment mode is selected, the
actual flash light intensity will be the total of the light
intensity adjustment value set on the FL-50 and that
set on the camera. The light intensity adjustment value
displayed is that of the FL-50 only.
[Example]
Light intensity adjustment value
Lens iris
ISO speed
F8 F5.6 F4 F2.8 F2 F1.4
F11 F8 F5.6 F4 F2.8 F2 F1.4
F16 F11 F8 F5.6 F4 F2.8 F2 F1.4
F22 F16 F11 F8 F5.6 F4 F2.8 F2
F32 F22 F16 F11 F8 F5.6 F4 F2.8
F32 F22 F16 F11 F8 F5.6 F4
F32 F22 F16 F11 F8 F5.6
F32 F22 F16 F11 F8
F32 F22 F16 F11
3200 1600 800 400 200 100 50 25
Selected
adjustment value
Adjustment value
displayed on FL-50
Actual light intensity
adjustment
FL-50 +0.3 +0.3 +0.6
Camera +0.3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus FL-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus FL-50 in the language / languages: English as an attachment in your email.

The manual is 9.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info