463851
37
Zoom out
Zoom in
Previous page
1/56
Next page
37
EN
Picture shooting using a digital camera
without communication capability
When using the electronic flash with a camera without communication
capability, adjust the ISO sensitivity and aperture value in AUTO mode
to the same values as on the camera or change the shooting distance
in MANUAL mode.
You can also emit the flash wirelessly as a slave flash. g “Slave
flash” (P. 39)
AUTO
In this mode, the flash light intensity is controlled automatically
according to the aperture setting.
ISO
sensitivity
Aperture
value
MODE button
1 While holding down the MODE button,
turn the dial to adjust the ISO sensitivity.
When 2 seconds pass with the MODE
button held, the camera enters custom
setup.
2 Press the ZOOM button to adjust the
firing angle according to the focal
distance of the lens.
3 Turn the dial according to the aperture
value of the lens.
If the ISO sensitivity/aperture value
combinations do not match the usable
range, the ISO sensitivity and aperture
value blink to alert you. In this case,
change the ISO sensitivity and/or aperture
value. g “Light control range in AUTO
mode” (P. 46)
Press the TEST button to test the flash
activation.
g
“Test flash activation” (P. 16)
4 When flash activation has been
performed correctly, the AUTO CHECK
lamp blinks for about 5 seconds after
the shutter is released.
ZOOM button
AUTO CHECK lamp
Flash intensity value
By selecting an ISO sensitivity and aperture value different from those set on the
camera, the flash intensity can be adjusted in 1/3 steps.
TEST button
r2067_e_000_cs2j.indb 37r2067_e_000_cs2j.indb 37 2007/10/01 10:49:542007/10/01 10:49:54
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus FL-36R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus FL-36R in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus FL-36R

Olympus FL-36R User Manual - German - 56 pages

Olympus FL-36R User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info