67251
47
Zoom out
Zoom in
Previous page
1/76
Next page
Getting to know your camera better
EN
47
The camera has been used in the same condition from the time of purchase
No date and time have been set in the camera at the time of purchase. Set
the date and time before using the camera.
g “Set the date and time” (P. 6), “X Setting the date and time” (P. 28)
The battery has been removed from the camera
The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 3 days. If the battery is in
the camera for a short period of time, the date and time setting will be reset
earlier than this. Before taking important pictures, check that the date and
time settings are correct.
There are several ways to focus, depending on the subject.
When the subject is not in the center of the frame
Place the subject in the center of the frame, lock the focus on the subject, and
then recompose your picture.
g “Shutter button Shooting pictures/movies” (P. 10)
The subject is moving quickly
Focus the camera on a point roughly the same distance away as the subject
you want to shoot (by pressing the shutter button halfway); and then
recompose your picture and wait for the subject to enter the frame.
g f Shooting pictures by selecting a scene mode according to the
situation” (P. 12)
Under certain types of conditions, it is difficult to focus using auto focus. The
green lamp on the monitor lights, allowing you to check if the focus is locked.
In these cases, focus (focus lock) on an object with high contrast at the same
distance as the intended subject, recompose your shot and then take the
picture. If the subject has no vertical lines, hold the camera vertically and
focus the camera using the focus lock function by pressing the shutter button
halfway, and then return the camera to the horizontal position while keeping
the button pressed halfway and take the picture.
The date and time have not been set
Shooting tips
Focusing on the subject
Subjects that are difficult to focus on
The green lamp
blinks.
The subject cannot
be brought into focus.
Subject with low
contrast
Subject with an
extremely bright
area in the center
of the frame
Subject without
vertical lines
Subjects at
different distances
Fast-moving
subject
The subject is not
in the center of the
frame
The green lamp
lights, but the
subject cannot be
brought into focus.
d4339_e_0000_7.book Page 47 Friday, December 15, 2006 6:05 PM
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus FE-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus FE-250 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus FE-250

Olympus FE-250 User Manual - German - 75 pages

Olympus FE-250 User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info