776085
263
Zoom out
Zoom in
Previous page
1/686
Next page
K 2-15 Flash Photography
6 Adjust ash settings.
Highlight items using the FGHI buttons and rotate the rear dial to choose settings.
Flash compensation
A Mode
P
250
1023
1:02:03
F5.6
100
%
1
TTL
Manual
Off
+5.0
TTL +3.0
1/8
Low
1
Ch
Group
Flash mode
Optical signal strength
Channel
Flash control mode
Group
Choose a group. Changes to settings apply to all units in
the selected group. Choose Q to adjust settings for the unit
mounted on the camera.
Flash control mode Choose a ash mode.
Flash compensation Adjust ash output. When [Manual] is selected for ash mode,
you can a value for manual ash output.
Optical signal
strength
Choose the brightness of the optical control signals emitted by
the ash units. Choose [HI] if you have placed ash units at
close to the maximum distance from the camera. This setting
applies to all groups.
Flash mode/
ash level
Choose # (standard) or FP (super FP). Choose super FP for
shutter speeds faster than the ash sync speed. This setting
applies to all groups.
Channel
Choose the channel used for ash control. Change the
channel if you nd that other light sources in the area are
interfering with remote ash control.
7 Set the unit mounted on the camera to [TTL AUTO].
Flash control settings for the FL-LM3 can only be adjusted using the camera.
Positioning Remote Flash Units
1 Set the wireless RC ash units to RC mode.
After turning compatible ash units on, press the MODE button and choose RC mode.
Choose a group for each of the compatible ash units using ash controls and match
the channel to that selected with the camera.
2 Position the ash units.
Position the wireless units with the remote sensors facing the camera.
3 Take pictures after con rming that the remote units and the unit on the camera
are charged.
263
EN
2
263


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus E-M1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus E-M1X in the language / languages: English as an attachment in your email.

The manual is 29.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info