776092
50
Zoom out
Zoom in
Previous page
1/173
Next page
Shooting
2
50
EN
Shooting with long exposure time (BULB/LIVE TIME)
Use for photos such as reworks or night scenery. In M
mode, rotate the rear dial in the direction shown until
[BULB(LIVE BULB)] or [TIME(LIVE TIME)] is displayed in
the monitor.
“Bulb” and “Live Bulb” Photography
The shutter remains open while the shutter button is pressed. Releasing the button ends the
exposure.
The amount of light entering the camera increases the longer the shutter is open.
When live bulb photography is selected, you can choose how often the camera updates
the live view display during the exposure.
“Time” and “Live Time” Photography
The exposure begins when the shutter button is pressed all the way down. To end the
exposure, press the shutter button all the way down again.
The amount of light entering the camera increases the longer the shutter is open.
When live time photography is selected, you can choose how often the camera updates
the live view display during the exposure.
To display the view through the lens in the monitor during bulb photography, select an
option other than [O󰀨] for [Live Bulb].
Press the MENU button to choose the display interval for [Live Bulb] or [Live Time]
photography. Select [O󰀨] to disable the display while exposure is in progress.
To refresh the display while exposure is in progress, tap the monitor or press the shutter
button halfway.
Some limitations apply to the choice of ISO sensitivity settings available.
To reduce blur caused by camera shake, x the camera securely to a tripod and use a
remote shutter release controlled via OI.Share (P. 127).
During shooting, there are limits on the settings for the following functions.
Sequential shooting, self-timer shooting, time lapse shooting, image stabilizer, etc.
Even when you have set [Noise Reduct.], noise and/or light spots may still be noticeable
in the image displayed on the monitor and shot images under certain environmental
conditions (temperature etc.) and camera settings.
Noise in images
While shooting at slow shutter speeds, noise may appear on screen. These phenomena
occur when the temperature rises in the image pickup device or image pickup device
internal drive circuit, causing current to be generated in those sections of the image pickup
device that are not normally exposed to light. This can also occur when shooting with a
high ISO setting in a high-temperature environment. To reduce this noise, the camera
activates the noise reduction function. g [Noise Reduct.] (P. 116)
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus E-M10 Mark III S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus E-M10 Mark III S in the language / languages: English as an attachment in your email.

The manual is 10.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info