287645
20
Zoom out
Zoom in
Previous page
1/118
Next page
20
Selecting Images for Printing
You can select images one by one or select all
images on the card for printing on a DPOF
compatible printer or printing by a DPOF
printing service.
To select single images for printing
Insert and select the card with the images that
you want to select for printing. Set the mode
dial to print reserve mode . Use the arrow
pad to display the image that you want to select
for printing, and then press the button. Press
or to select the number of copies that you
want to print, and then press the button. The
image is marked with the print reserve mark
and the number of copies that you have
selected. Repeat this procedure to select and
mark more images for printing. Reset the mode
dial to leave the print reserve mode. To cancel a
selection, repeat this procedure and select zero
for the number of copies.
To select or cancel all images for printing
Insert and select the card with the images that
you want to select for printing. Set the mode
dial to print reserve mode , and then press
the menu button . Use the print reserve item
on the print reserve mode menu to select
or clear all images on the card for printing.
To select images for date or time stamping
Insert and select the memory card that
contains the images that you want to select for
date or time stamping. Set the mode dial to
print reserve mode , and then press the
menu button . In the print reserve mode
menu use the Date or Time Stamping item
to set date or time stamping for the image.
To select or cancel index printing
Insert and select the memory card that
contains the images that you want to select for
index printing. Set the mode dial to print
reserve mode , and then press the menu
button . In the print reserve mode menu, use
the Index Printing item to select or clear all
previous selections for printing.
Reading Images with a Computer
You can use the USB cable provided with the
camera to connect the camera to a computer
equipped with a USB interface and read
images from either card in the camera with the
computer. The following equipment is required:
• A USB cable provided with the camera.
• A USB driver. A USB driver is provided with
CAMEDIA Master 2.5. The most recently
updated USB drivers are available from the
Olympus Home page at www.olympus-
europa.com or contact an Olympus Service
Center.
• An IBM compatible PC/AT with Windows 98,
Windows 98 Second Edition, or Windows
2000 installed.
• An Apple Macintosh or iMac with Mac OS 8.6
to 9.0 installed.
For more details refer to the software CD’s
Reference Manual on CD-ROM.
Optional Devices for Reading Cards
You can also use one of the optional devices to
read image files from a memory card if your
computer is not equipped with a USB port.
Before you purchase one of these optional
devices, make the device can be used with
your computer. For more details, contact an
Olympus Service Center.
To read a SmartMedia card
Floppy Disk Adapter FlashPath MAFP-2NE.
A 3.5-inch floppy disk drive is required.
PC Card Adapter MA-2E. A PCMCIA card
slot is required on your computer.
SmartMedia Reader/Writer MAUSB-2. A
USB connector is required.
To read a CompactFlash card
PC Card Adapter. A PCMCIA card slot is
required.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus e-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus e-10 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus e-10

Olympus e-10 User Manual - English - 202 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info