Manual Olympus DW90 (page 2 of 8) (English)

18632

Zoom out

Zoom in

1/8

Replacing Batteries

When

appears on the display, replace the batteries as

soon as possible. Size-AAA alkaline batteries are

recommended. When the batteries are depleted,

appears on the display, and the recorder shuts off.

It is recommended to set the HOLD switch to the HOLD position before you replace

batteries to maintain the current settings (time/date, etc.). For your convenience,the

recorder also logs the current settings in nonvolatile memory at hourly intervals.

Setting Time/Date

If you have set the time and date, information as to when a sound file was recorded

is stored automatically with that file. The time and date should be set to ease sound

file management tasks.

The setting of the time and date is necessary for the management of the files in

folder S (see “Notes on the Folders” for details), for the alarm playback function,

and for the schedule alarm playback function.

When you install batteries for the first time or each time you replace the batteries,

the hour indication will flash. In such a case, be sure to set the time and date by

following steps 4 through 6 described below.

1 Press and hold the MENU/FOLDER button for

1 second or longer.

2 Press the 9/+ or 0/– button to select the Time/

Date Setup screen.

“TIME” flashes on the display.

3 Press the PLAY button.

The hour indicator flashes.

4 Press the 9/+ or 0/– button to set the hour.

5 Press the PLAY button to accept the hour.

The minute indicator flashes.

Repeat steps 4 and 5 to continue to set the minute, year, month and date in

the same way.

6 After setting the date, press the STOP button.

This completes the time/date setup procedure.

• You can switch the time indication between the 12-hour system and the 24-hour

system by pressing the DISPLAY button while you are setting the hour or minute.

(Example: 5:23 P.M.)

(Initial setting)

• You can change the order of the date indication by pressing the DISPLAY button

while you are setting the year, month, or day.

(Example: February 14, 2001)

• Each time you press the DISPLAY button while the recorder is stopped, the display

changes as follows (with folder A or B selected):

Time → Remaining recording time → Date → Time . . .

The selected indication appears on the display each time the recorder is stopped.

Notes

• If you leave the recorder untouched for 3 minutes or longer before pressing the STOP button

in step 6, Setup mode will be canceled, and any time/date settings you made will be canceled.

• If you press the STOP button during setup, time/date setup is canceled.

• You can set the time and date on the recorder by connecting it to your PC (see “Other functions

of Olympus Digital Wave Player” for details).

Inserting Batteries

1 Holding the battery compartment cover

pressed slightly toward the recorder,

slide the cover until it unlocks, then

open the cover.

2 Insert two size-AAA alkaline batteries,

observing the correct polarity.

3 Close the battery cover completely.

Notes on the Folders

The recorder has three folders: A, B, and S.

• Folders A and B

Each recorded message stored in a folder is saved as a Wave file. These folders

can be selectively used to distinguish the kind of recording. Up to 100 files can be

stored per folder.

• Folder S

In folder S, files are nested in date subfolders,* making it useful for storing a

certain day’s schedule for future reference. Up to 15 files can be stored in a single

date subfolder, and up to 100 files altogether can be recorded in folder S.

* There is one subfolder for each day of the year.

a Current folder

a Date to record

a Folder

b Current recording

mode

c Current file number

d Recording time*

e Remaining

recording time

(Initial setting)

a Battery indicator

To change folders

Press the MENU/FOLDER button while the recorder is

stopped.

Each time you press the MENU/FOLDER button, the display

changes as follows:

A → B → S → A . . .

To change date subfolders in folder S, select folder S first,

and then press the 9/+ or 0/– button to select the

date subfolder.

Recording

1 Press the MENU/FOLDER button to select the desired folder (A, B, or S).

When you select folder S, the current date subfolder appears on the display.

If you select folder A or B, go to the step 3.

2 If you select folder S, press the 9/+ or

0/– button to select the desired date subfolder.

3 Set the recording mode (see “Recording Modes”).

4 Set the microphone sensitivity (see “Microphone

Sensitivity”).

5 Press the REC button to start recording.

The recording lamp lights, and recording starts.

Each time you press the DISPLAY button, the display

switches between current recording time and

remaining recording time.

6 To stop recording, press the STOP button.

* When the remaining recording time becomes 5 minutes or less,

the display changes to remaining recording time automatically.

Notes

• Even if you press the DISPLAY button, the display will not change

to current recording time if the remaining recording time is 5 minutes

or less.

• When the remaining recording time becomes 1 minute or less, the recording lamp flashes.

• If “FULL” appears on the display, you cannot record in the selected folder. In such a case,

erase unnecessary files (see “Erasing from folder A or B” or “Erasing from folder S”).

• There is one subfolder for each day of the year.

Folder B

Press the MENU/FOLDER

button

Folder A File

Maximum

of 100 files

Folder S

(schedule)

Date subfolder

Maximum

of 100 files

Maximum

of 15 files

Maximum

of 100 files

File

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympus DW90 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympus DW90 Manual

Product: