Manual Olympus DS-7000 (page 7 of 184) (English, German, Dutch, Danish, French, Polish, Swedish, Spanish)

538172

Zoom out

Zoom in

1/184

EN CS DA DE ES FR NL PL RU SV

Turning on the recorder

Move the POWER switch to [ ON]

position to activate the recorder.

Memory card

This recorder uses two types of

memory cards: a microSD card

as internal memory, and an SD

card as additional memory.

You can remove the content recorded

in both the cards safely in case of

malfunction of the recorder.

Compatible cards

The recorder supports memory card

capacity from 512 MB up to 32 GB.

Cards compatibility

For a list of card compatible with the

recorder, please visit the product

homepage at the Olympus website

applicable to your region or contact

your Olympus reseller where you

purchased the product.

Notes:

• When initializing (formatting) a

card, confirm that no necessary

data is stored on the memory

card beforehand. Initialization

completely erases the existing

data on the card.

• Cards formatted (initialized) by

another device, like a computer,

may not be recognized. Be sure

to format them with this recorder

before use.

Setting time and date [Time & Date]

If you set the time and date

beforehand, the information when

the file is recorded is automatically

stored for each file. Setting the time

and date beforehand enables easier

file management.

When you use the recorder for the

first time after purchasing it, or

when the battery has been inserted

without the device being used for

a long time, the [

Set Time & Date

]

will appear.

• For further details, a complete

advanced version of the manual *

(PDF format) is available for

download at the OLYMPUS website.

* Available in English, French or

German.

1 Press the 9 or 0 button to

select the item to set.

Select the item from the “ hour ”,

“ minute ”, “ year ”, “ month ” and “ day ”

with a flashing point.

• The card has a service life. When

reaching the end of its life, writing

or erasing data on the card will be

disabled. In this case, replace the

card.

• If you use a PC card adapter

compatible with the card to save

or delete some data on the card,

the maximum recording time on

the card may be decreased. To

recover the original recording time,

initialize/format the card in the

recorder.

Inserting and ejecting a SD card

Inserting a SD card

Insert the SD card fully into the card

slot with the card facing the direction

shown in the illustration below, until

it clicks into place.

• Insert the card keeping it straight.

Card recognition

After inserting SD card, the message

[ Please Wait ] will flash on the display

while the recorder recognizes the

SD card.

Ejecting a SD card

Push the SD card inward to unlock it

and let it come out of the slot.

• Hold the card straight and pull it

out.

Notes

• Inserting the card the wrong way

or at an angle could damage the

contact area or cause the card to

jam.

• If the card is not inserted all the

way into the slot, data may not be

written properly.

• When an unformatted card is

inserted into the card slot, the

recorder will automatically display

the format menu options.

• Use only cards formatted with the

recorder.

• Never remove the card while the

recorder is operating, as this may

damage the data.

• After pushing the card inward to

eject it, releasing your finger too

quickly may cause the card to be

ejected unexpectedly.

• This recorder uses a microSD card as

internal memory. The microSD card

has been preloaded.

• The recorder may not properly

recognize the card even when that

card is compatible with it.

• The processing performance

reduces in a card when you repeat

writing and deleting. In this case,

format the card.

2 Press the

−

button to set.

You can select between 12 and

24 hour display by pressing the

F2 ( 24H ) button while setting the

hour and minute.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympus DS-7000 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish, Spanish as an attachment in your email.

The manual is 3,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympus DS-7000 Manual

Product: