538306
56
Zoom out
Zoom in
Previous page
1/113
Next page
56
4
EN
Menu setting method
Menu setting method
a
b
[Off]:
Disables this function. Will resume
recording in normal mode.
When [Standby] is selected:
[On]: With this setting, the recording
monitor (earphone output) is
disabled during VCVA standby
( P.34), which allows you to confirm
VCVA activation status by the
earphone output.
[Off]: The audio signal is always output
from the earphone jack.
Adjust the start/stop actuation level:
1 Press the REC (s) button to start
recording.
When the sound volume is lower than
the preset threshold sound level,
recording automatically stops after
1 sec approximately, and [Standby]
flashes on the display. The LED
indicator light glows when recording
starts and flashes when recording
pauses.
2 Press the 9 or 0 button to
adjust the start/stop actuation
level.
The VCVA level can be set to any of 23
different values.
The higher the value, the more
sensitive the recorder will be to
sounds. At the highest value, even the
faintest sound will activate recording.
When using the [VCVA] function, the
following functions are not available.
• [V-Sync. Rec]
• When [Rec Monitor] is set to [Off], the
[Standby] function is disabled ( P. 59).
If the start/stop actuation level is not
adjusted within 2 seconds, the display
will return to the previous one.
If the surrounding noise is loud, the start/
stop actuation sensitivity of the VCVA can
be adjusted according to the recording
situation.
To ensure successful recordings, prior
testing and adjustment of the start/stop
actuation level is recommended.
V-Sync. Rec
Voice sync recording starts when a voice
louder than the voice sync level (detection
level) is detected. When the voice becomes
low, recording will automatically stop.
When voice sync recording is on and the
input level falls below the voice sync level
(detection level) for a period of at least the
specified detection time, the recorder will
return to the standby mode.
1 Select [On] or [Off].
[On]: Enables the Voice sync recording
function.
[Off]: Disables this function.
If you select [On], proceed to the
operation of Step 2.
a Level meter (varies according to the
sound volume being recorded)
b Start level (moves to the right/left
according to the set level)
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus DM-670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus DM-670 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympus DM-670

Olympus DM-670 User Manual - German - 113 pages

Olympus DM-670 User Manual - Dutch - 113 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info