471037
19
Zoom out
Zoom in
Previous page
1/164
Next page
19En
En
WHITE BALANCE
This camera incorporates electronic circuitry to automatically adjust color
hues so that they appear more natural (auto white balance control circuit). If
the auto white balance does not produce accurate results due to weather or
lighting conditions, you can control the white balance manually.
Note
White balance settings
Auto (AUTO) : The white balance is controlled automatically.
(No mark is displayed on the LCD monitor)
Clear Sky ( ) : Outdoors under a clear sky.
Cloudy Sky ( ) : Outdoors under a cloudy sky.
Incandescent Lamp ( ) : Under incandescent lighting.
Fluorescent Lamp ( ) : Under fluorescent lighting.
1 Open the lens barrier.
The camera turns on in the Record mode.
2 Press the button.
The monitor shows the Camera menu.
3 Select [PICTURE] using the / buttons and press the button.
4 Select [
] using the / buttons and press the button.
5 Select [AUTO], [
], [ ], [ ] or [ ] using the /
buttons and press the button.
The white balance setting is now completed.
Press the
button again to exit the menu.
6 Take a picture.
Note
The white balance setting returns to AUTO (default setting) when the clear
settings value is [RESET] and the lens barrier is closed. See Clear settings
( p.27).
Under a combination of artificial and natural lighting or under fluorescent
lighting, natural hues may be difficult to achieve on the AUTO mode.
To obtain an image coloring that resembles what you see under incandescent
lighting, set the white balance mode to [ ].
Caution
Under special light source conditions, the white balance control circuitry may
not work completely as intended.
When the flash is fired with a white balance setting other than AUTO, be sure
to check the color tone on the monitor to check if the white balance value set is
optimal.
When the flash is fired with a white balance setting other than AUTO, colors
may appear different in the resulting images from the colors you see on the
monitor.
1/Basic04_C2-E.65E 8/22/01, 5:42 PM19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus D-230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus D-230 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 5,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info