569044
18
Zoom out
Zoom in
Previous page
1/94
Next page
18
5 Starting Up
Place the device on a stable, level surface.
Attention: Check that the voltage specifications of the device
correspond to that of your power supply network (220-240 V, 50 Hz).
Insert the power plug in an easily accessible, standard power socket.
Safety note: The power socket must be in the immediate vicinity of
the device and easily accessible. This enables you to disconnect the
device from the power supply quickly in an emergency.
6 Operation
6.1 Switching the device on and off
1. Press the POWER button. The POWER LED lights up red. The device is
switched on.
2. Press the POWER button. The POWER LED goes out. The device is
switched off.
6.2 Thermal binding
1. The Bind/Counter LED flashes red when the device is warming up. The
correct operating temperature is reached after about 3 minutes and the
Bind/Counter LED lights up green continually. An acoustic signal also
indicates that the device is ready for thermal binding.
2. Insert the sheets of paper in the thermal binding cover.
Note: Pay attention to the maximum binding capacity, refer to Chapter
"Technical Data".
3. Pull out the tray on the rear side of the device (cooling device) to enable
the thermal binding cover to be inserted in the binder infeed slot.
4. Guide the thermal binding cover, with the closed side at the bottom, from
the top in the binding infeed slot. An integrated clamping mechanism
holds the paper perpendicular.
5. Press the Thermal Binding button to start the binding process.
6. The Bind/Counter LED flashes red during the binding process. The
binding process is completed after about 1 minute and the Bind/Counter
LED lights up green continuously. Three acoustic signals also indicate
that the thermal binding process has finished.
Caution: The bound folder is very hot in the spine area after binding!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia TB 1280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia TB 1280 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info