569029

Olympia PS 408.2 CCD Manual

27
Zoom out
Zoom in
Previous page
1/102
Next page
27
11 Troubleshooting
Problem Diagnosis & Cause Solution
Is the power plug connected
properly in the power socket?
Connect the power plug to the
power socket properly.
Is the On/Off switch set to
OFF?
Set the On/Off switch to its ON
position.
Is the function switch set to it
AUTO position?
Set the function switch to its
middle position to the AUTO
function.
Has the device been assembled
properly?
Ensure that the waste bin has
been inserted properly.
Device does not
work
Does the motor fail to start
when paper is inserted?
Slide the material to be
shredded in the respective
infeed slot so that it makes
contact with the sensor in the
middle.
Device
continues to run
after shredding
Internal sensor is covered by
residual paper or is soiled.
Set the function switch to the
REV setting so that the cutting
mechanism runs in reverse,
releasing the material and
feeding the jammed material
back out.
Device no
longer functions
after a longer
period out of
service or stops
during operation
Was the device shutdown for a
longer time? Is the surface of
the device warm? The
permissible operating cycle has
probably been exceeded.
First of all, disconnect the
power plug from the power
socket and allow the motor to
cool down to room temperature.
For information on the operating
cycle, refer to Chapter
"Technical Data".
Overloading
(material jam)
Have you exceeded the
permissible material
(refer to Chapter "Technical
Data")? Has the material been
fed in askew?
Clear the material jam, refer to
Chapter "Clearing a material
jam".
Note: If you cannot clear the fault yourself, contact your dealer or call the Olympia
hotline.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia PS 408.2 CCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia PS 408.2 CCD in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info