Manual Olympia PS 33T (page 17 of 66) (English, German, Dutch, French, Italian, Spanish)

569019

Zoom out

Zoom in

1/66

Faults

Problem Cause Solution

Power plug is not prop-

erly connected in the

power socket.

Insert the plug properly.

The paper is too thin and,

as a result, does not

touch the mechanical

sensor.

Try using thicker paper. If the device then

operates, fold the thin paper and try

shredding it again.

The device does

not operate when

paper has been

inserted.

The motor has over-

heated and switched off

automatically. It is possi-

ble that paper has

jammed in the cutting

mechanism.

Clearing a paper jam:

1. Move the sliding switch to its Rev

(Reverse) position to dislodge and

remove the jammed paper.

2. If this proves ineffective, disconnect

the power plug. Remove the shredder

attachment and remove any jammed

paper from the cutting mechanism

manually.

Wait 30-40 minutes (until the motor has

cooled down) and try to use the shredder

again.

Too many sheets have

been inserted in the in-

feed.

The paper size inserted

was too large (larger than

A4).

Move the sliding switch to its Rev (Re-

verse) position to remove the jammed

paper. Then insert maximally 5 sheets of

A4 (80 g/m²) (unfolded).

The device

does not shred.

The paper was inserted

crooked.

Move the sliding switch to its Rev (Re-

verse) position to remove the jammed

paper. Insert the paper as straight as

possible.

The sliding switch is set

to Fwd.

Move the sliding switch to Auto (Auto-

matic operation).

The device does

not stop after the

shredding process

has finished.

Paper has caught at the

mechanical sensor.

Remove the paper from the cutting

mechanism (refer to "Clearing a Paper

Jam").

The device makes

loud noises.

The device does not

stand on a level surface.

Set the device down on a level surface.

If you cannot clear the fault yourself, contact your dealer or call the Olympia hotline.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia PS 33T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia PS 33T Manual

Product: