569023
11
Zoom out
Zoom in
Previous page
1/51
Next page
11
Parts and function
Operations
Place the shredder head on the waste bin correctly; when you x the shredder head
in place you will hear a click when the microswitch underneath the shredder head
connects correctly with the rib on the waste bin. Now connect the shredder to the
mains (check the voltage), and move the selector switch to the AUTO position to
operate the shredder.
PAPER/CREDIT CARD:
Put the waste paper/credit card you want to shred into the paper feed opening verti-
cally. The mechanical sensor inside the paper feed opening will be triggered and the
shredder will start to work automatically. After shredding is nished, the shredder will
run for 2-4 seconds until the motor is switched off automatically. Do not shred more
than 10 sheets of paper at a time, as shown in the specications.
CD
If you want to shred a CD, move the selector switch to the AUTO position and put the
CD into the CD feed opening. Do not shred more than 1 CD at a time, as shown in
the specications.
If there is a jam, move the selector switch to the REV position and the shredder will
reverse the jammed paper/CD automatically. If you want to stop the shredder, move
the selector switch to the OFF position. If the motor overheats, the shredder will be
shut off automatically. After a cooling down period of 60 minutes, the shredder can be
started again.
1) Power cord
2) Paper feed opening
3) CD feed opening
4) Selector switch
AUTO: the shredder is ready to work
FWD: the shredder is moving for-
ward
REV: the shredder reverses the
paper when you move the
switch to this position
OFF: the shredder stops
5) CD waste bin
6) Waste bin
7) Overheat protection indicator
8) Power indicator
1.
2.
3.
4.
2) Paper feed opening
3) CD feed opening
6) Waste bin
5) CD waste bin
8) Power indicator
7) Overheat pro-
tection indicator
1) Power cord
4) Selector switch
AU TO: the shredder is ready to work
FWD: the shredder is moving forward
REV:
the shredder reverses the paper
when you move the switch to
this position
OFF: the shredder stops
injuries (for example, if solid material splinters) or damage to the device (destruction of
the cutting unit, etc.).
Do not shred endless paper documents with this device. Remove all paper clips and
staples before feeding paper into the device.
The device may only be used indoors in dry rooms.
BDA_PS_28.indd 11 22.03.2011 9:02:00 Uhr
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia PS 28CCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia PS 28CCD in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info