569021
7
Zoom out
Zoom in
Previous page
1/24
Next page
Clearing a jam
If too much material is inserted in the respective cutting unit, it will cause a jam.
Proceed as follows:
- Push the sliding switch to the REV position.
- The cutting unit runs backwards and pushes the excess material back.
- Reduce the quantity and slide the switch to AUTO again. The cutting unit runs
forward again and the residue remaining is shredded.
If the backwards and forwards movement does not remedy the jam, pull out the mains
plug and remove the remaining manually from the cutting unit.
Motor protection
The motor switches off automatically in the event of overloading. Pull out the mains
plug from the socket and allow the motor to cool down to room temperature. Plug the
mains cable back in and then continue operation.
Notes on care and maintenance
Caution: maintenance work may only be performed when the mains plug is pulled
out.
To ensure your shredder en
joys a long working life, we recommend to clear residual
material from the cutting units at regular intervals and apply special oil for paper
shredders to the cutting unit. This special oil is available from specialist dealers or di-rectly
from our service centre i
n Hattingen. This will extend the service life of the device.
Technical data
Model: PS 24 CCD
Cutting width of the paper slot: 220 mm, size of the cuttings: 4 x 45 mm
Cutting width of the CD slot: 123 mm, width of cut strips: 22 mm
Cutting power: 7 DIN A4 sheets (70 g/m
2
), 1 CD, 1 credit card
Security level: 3
Power supply: 230V / 50Hz
Max. power consumption: 1,2 A
Rated operation: 2 min. on, 20 min. off
Size (W x H x D):
342 x 138 x 380 mm
Weight: 11,3 kg
Paper basket: 12 litre
CD basket: 0,6 litre
Device malfunctions
Problem Cause Remedy
Is the mains cable plugged
properly in the socket?
Plug the mains cable into the
socket properly.
Is the sliding switch set to
AUTO?
Set the sliding switch to AUTO.
Device does not
work
Does the motor not start
when paper, CD or credit
card is inserted?
Slide the paper, CD or credit card
in the respective slot so that it
touches the sensor in the centre.
Device does not
work after lengthy
operation or
stops during
operation
Was the device in constant
operation for some time?
Is the surface of the device
warm?
Pull out the mains plug from the
socket and allow the motor to cool
down to room temperature.
Jam Have you inserted more
than 7 sheets of paper (70
g/m²), more than 1 CD or
more than 1 credit card?
Has the material not been
inserted straight in the in-
feed slot?
Set the sliding switch to REV to
push back the material. Switch the
device to AUTO again to shred the
material remaining in the cutting
unit.
If you cannot rectify the fault yourself, contact your dealer or call the Olympia hotline.
Disposal Notes
This symbol [the crossed-out wheeled bin/PICTURE] means that the product should
be brought to the return and or separate collection systems available to end-users,
when the product has reached the end of its lifetime. This symbol applies only to the
countries within the EEA (*).
(*) EEA = European Economic Area, which comprises the EU Member
States plus Norway, Iceland, and Liechtenstein.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia PS 24 CCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia PS 24 CCD in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info