569264
7
Zoom out
Zoom in
Previous page
1/20
Next page
Clearing a jam
If too much paper is inserted in the cutting unit, it will cause a jam.
Proceed as follows:
- Push the sliding switch to the Paper Rev /CD position.
- The cutting unit runs backwards and pushes the excess paper back.
- Reduce the quantity and slide the switch to Paper Auto / CD again. The cutting unit runs
forward again and the residue remaining is shredded.
If the backwards and forwards movement does not remedy the jam, pull out the mains plug
and remove the remaining manually from the cutting unit.
Motor protection
The motor switches off automatically in the event of overloading. Pull out the mains plug
from the socket and allow the motor to cool down to room temperature. Plug the mains
cable back in and then continue operation.
Notes on care and maintenance
Caution: maintenance work may only be performed when the mains plug is pulled out.
To ensure your shredder enjoys a long working life, we recommend to clear residual material
from the cutting units at regular intervals and apply
special oil for paper shredders to the
cutting unit. This special oil is available from specialist dealers or directly from our service centre
in Hattingen. This will extend the service life of the device.
Technical data
Model: PS 17 CD
Power supply: 220-240 V / 50Hz
Cutting width of the paper slot: 215 mm, width of cut strips: 7 mm
Cutting width of the CD slot: 120 mm, width of cut strips: approx. 30 mm
Cutting power: 7 DIN A4 sheets (70 g/m
2
), 1 CD
Security level: 1
Max. power consumption: 0.5 A
Size (W x H x D): 300 x 185 x 320 mm
Weight: 3.6 kg
Operating cycle paper: 2 min. on, 15 min. off
Operating cycle CD: 2 min. on, 15 min. off
Device malfunctions
Problem Cause Remedy
Is the mains cable plugged
properly in the socket?
Plug the mains cable into the socket
properly.
Is the sliding switch set to
Off?
Set the sliding switch to Paper Auto
or Paper Rev / CD.
Device does not
work
Does the motor not start when
paper is inserted?
Slide the paper in the respective slot
so that it touches the sensor in the
centre.
Device does not
work after lengthy
operation or stops
during operation
Was the device in constant
operation for some time?
Is the surface of the device
warm?
Pull out the mains plug from the
socket and allow the motor to cool
down to room temperature.
Jam Have you inserted more than
7 sheets of paper (70 g/m²) or
more than 1 CD?
Has the material not been
inserted straight in the in-feed
slot?
Set the sliding switch to
Paper Rev / CD to push back the
paper. Switch the device to Paper
Auto again to shred the paper
remaining in the cutting unit.
If you cannot rectify the fault yourself, contact your dealer or call the Olympia hotline.
Disposal Notes
This symbol [the crossed-out wheeled bin/PICTURE] means that the product should be
brought to the return and or separate collection systems available to end-users, when the
product has reached the end of its lifetime. This symbol applies only to the countries within
the EEA (*).
(*) EEA = European Economic Area, which comprises the EU Member States
plus Norway, Iceland, and Liechtenstein.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia PS 17 CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia PS 17 CD in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info