568973
21
Zoom out
Zoom in
Previous page
1/40
Next page
Configuration
Giu
OPERATING
INSTRUCTIONS
21Page
Activating the GSM Internal Telephone Dialling
Unit with OGM Function
NOTE: A SIM card must be installed in order to use
the GSM telephone dialling unit.
The internal telephone dialling unit is deactivated if no telephone numbers
have been entered and saved.
You can enter up to 10 individual telephone or mobile phone numbers of
contact persons, such as relatives, friends or neighbours. In the event of
an alarm, the internal GSM telephone dialling unit dials these phone num
bers automatically in the sequence they were entered (beginning with
memory location 0) and communicates the status via the voice messages
assigned to the respective sensors. In the case of an "engaged" signal or
no connection is possible, the next phone number is automatically dialled.
A total of three dialling cycles are completed!
The internal GMS telephone dialling unit is deactivated when a subscriber
called answers the call made and presses the numeric key [1] on his tele
phone or 3 dialling cycles have been completed.
NOTE: Save as many phone numbers as possible.
This increases the probability of reaching a
contact person in the event an alarm is
triggered. If, for example, you only save two
phone numbers and both are engaged when
the alarm call is sent, the dialling cycle soon
comes to an end!
NOTE: Do not forget to inform the contact persons
that they will be called by your alarm system
automatically if an alarm is triggered and agree
on a sequence of actions if the alarm is
triggered.
Memory locations 0-9 (buttons 0 to 9) are available to enter up
to 10 phone numbers. Each phone number can be composed of up to 24
characters/digits. In addition, a name with up to 13 characters/letters can
be assigned to each phone number.
NOTE: Unjustified requests for police, fire and rescue
services are liable for costs!
Save the phone numbers as follows:
1. Enter the device-specific Entry Code. Confirm it by pressing O.
2. Press the B button. Location Key appears in the display.
3. Select a memory location (button 0-9). If you have not
yet stored a phone number, Empty appears as information in the
display. Confirm it by pressing O.
4. Enter the phone number including the access code. Confirm it by
pressing O.
5. Enter the name associated with the phone number. Confirm it by
pressing O.
6. Press C to exit from the menu.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia Protect 9030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia Protect 9030 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympia Protect 9030

Olympia Protect 9030 User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info