568970
8
Zoom out
Zoom in
Previous page
1/36
Next page
Installation
OPERATING
INSTRUCTIONS
Giu
8Page
Installation, Base Unit
Information on Selecting the Installation Location
S The base unit should be installed or positioned in a central location
(e.g. in the hallway of an apartment/house) in relation to the area to
be monitored in order to keep all transmission paths as short as
possible.
S Place the base unit in a location where a power socket
(230 V / 50 Hz) and telephone connection socket (for the integrated
telephone dialling unit) are available.
S Choose a location within the area being monitored to ensure that no
intruders can approach the base unit and manipulate it.
S The base unit and power adapter plug must not be used in damp
rooms (cellar, bathroom, etc.) or in the direct vicinity of sources of
heat.
S The base unit should not be installed/setup on or in the direct vicin
ity of large metallic objects or sources of electrical interference be
cause this reduces the transmission range.
Examples of sources of interference
Metallic objects
Source of electrical interference
Radiators Loudspeaker systems
Mirrors Motors
Concrete steel
walls
Unshielded electrical apparatus
Metal doors
Preparing and Connecting the Base Unit
NOTE: The alarm system can also be operated without
a telephone connection. In the event the alarm
is triggered, however, the internal telephone
dialling unit is not activated!
RJ11
connector
TAE
connector
Power socket
Telephone
connection
socket
N
RESET
Power
adapter
plug
1. Use a screwdriver to loosen the screw in the battery and connection
socket compartment on the underside of the base unit.
2. Remove the lid from the battery and connection socket compartment.
3. Plug the RJ11 connector in the base unit socket.
4. Insert three AAA alkaline batteries in the battery compartment (pay
attention to correct polarity).
5. Connect the power adapter plug to the base unit.
6. Replace the lid on the battery and connection socket compartment.
7. Replace and tighten the screw.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia Protect 6030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia Protect 6030 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympia Protect 6030

Olympia Protect 6030 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info