Manual Olympia PMR 1102 (page 10 of 64) (All languages)

569236

Zoom out

Zoom in

1/64

ENGLISH

USING A PMR DEVICE

To communicate between PMR devices they need to be set all on the same channel and CTCSS code

and within receiving range (up to max. 3 km in open field). Since these devices use free frequency

bands (channels), all devices in operation share these channels (total 8 channels). Therefore, privacy is

not garanteed. Anybody with a PMR set to your channel and CTCSS codecan overhear the

conversation.

If you want to communicate (transmitting a voice signal) you need to press the h − button (Push to

talk). Once this button pressed, the device will go into transmit mode and you can speak into the

microphone. All other PMR devices in range, on the same channel and CTCSS code and in standby

mode (not transmitting) will hear your message. You need to wait until the other party stops transmitting

before you can reply to the message. At the end of each transmission the unit will send a beep if the

roger is on. To reply, just press the h − button and speak into the microphone.

CTCSS (CONTINUOUS TONE CODED SQUELCH SYSTEM)

The 2 digit CTCSS code corresponds to a specific tone frequency the radio emits. Two users, with the

same channel and CTCSS set can hear one another. They will not be able to hear anyone else on the

channel unless the other radios have the same exact CTCSS code enabled.

The exception here is use of the CTCSS code 0". If this code is selected, all conversations on the

channel set can be overheard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia PMR 1102 in the language / languages: All languages as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia PMR 1102 Manual

Product: