569308

Olympia OM 9812 Manual

38
Zoom out
Zoom in
Previous page
1/154
Next page
2.7
Basic operation
Redialling
Automatically fax redialling
If your fax call fails, your machine automatically redials it. In this Auto Redial
mode, your fax automatically redials the number up to two times at one minute inter-
vals.
Note: You can change the redial time and interval settings. (See “Changing redial
settings,” page 4.5.)
While in the Auto Redial mode, the machine can continue to receive faxes and can
make as many as 99 fax transmissions.
Note: If you used either the soft key that is assigned
MONITOR
/
CALL
or a attached
telephone to dial the call, you must redial manually (see below).
Note: If the last redial attempt fails, your machine may print (and/or display)
error messages.
Redialling manually
You can always redial calls manually. And you must redial manually if you used
either the soft key that is assigned
MONITOR
/
CALL
or the attached telephone to dial
the failed call.
Note: If you had dialed using the numeric keypad of the attached telephone, you
cannot redial. You can redial if you had dialed using the numeric keypad on
the control panel.
To redial a fax call manually without using the soft key that is assigned
MONITOR
/
CALL
key or the attached telephone:
1
Set the document and set the resolution and contrast.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
3
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
4
Press
START
.
To redial a fax call manually with the soft key that is assigned
MONITOR
/
CALL
or the attached telephone:
1
Make sure the document is in the
ADF
and that the resolution and contrast
are set.
2
Press
MONITOR
/
CALL
or lift the attached telephone to get a dial tone.
3
Press
REDIAL
/
PAUSE
. The
LCD
will show:
4
Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
5
When you hear fax tones from the remote unit, press
START
.
Note: If a person answers the phone, use the attached telephone to tell that
person you’re sending a fax. When you hear fax tones, press
START
.
To redial a voice call manually using the attached telephone:
1
Lift the attached telephone to get a dial tone.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
3
Your machine can memory the latest 10 dial numbers. Press or until the
dial number you want to redial appears.
4
Press
START
.
When the other person answers, use the attached telephone to speak to that
person.
View Redial History
0:1234567890
View Redial History
0:1234567890
View Redial History
0:1234567890
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia OM 9812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia OM 9812 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info