Manual Olympia NC 330 (page 14 of 54) (English, German, Dutch, French, Italian, Spanish)

569053

Zoom out

Zoom in

1/54

Olympia NC 330 / NC 340

- 14 -

5.3 Setting options on the bank note validator

5.3.1 Selecting the currency to be validated

The bank note validator can control two different currencies whereby one currency is always the Euro.

1. Switch the bank note validator on.

2. Press the Reset/Currency button twice in succession to switch between the two possible currencies.

5.3.2 Selecting the discharge side

The bank note validator is provided with two discharge sides for validated bank notes. The bank notes can be

discharged either on the rear side of the bank note validator or fed back to the front of the device.

Note: Counterfeit or unrecognised bank notes are generally discharged at the front.

1. Switch the bank note validator on.

2. Press and hold the Report/DIR button for 2 seconds.

Note: When the corresponding icon is displayed in the status line, the bank notes are discharged at the

front (refer to Chapter

X6.2X).

5.4 Validating bank notes and reading totals

To prevent incorrect counting and damage to the bank note validator, the following bank notes should be sorted

out prior to the validation process:

 adhered bank notes

 washed bank notes

 heavily soiled bank notes

 damaged bank notes

Note: Smoothen any creased or kinked bank notes before feeding them into the bank note validator.

1. Switch the bank note validator on: Set the On/Off switch to Position I.

After the bank note validator is switched on, it completes an automatic self-diagnosis (alternating display

indicators, acoustic signals), the corresponding error icon appears in the display in the case of problems.

When the bank note validator is ready to use, the value and count indicators display zeros.

2. If necessary, select the currency to be validated (refer to Chapter

X5.3.1X).

Note: The programmed currencies cannot be mixed and validated. The currency to be validated must be

defined at the beginning of the process.

3. If necessary, select the discharge side for the validated bank notes (refer to Chapter

X5.3.2X).

4. Feed the bank note lengthways in the front infeed/discharge slot. The bank note is drawn in by the motor

and controlled. All the information on the bank note just controlled appears in the display (refer to Chapter

X5.1.3X and Chapter X6X).

Note: If a bank note is not inserted correctly in the bank note validator or in the case of counterfeit

money, the bank note is ejected at the front of the bank note validator, an error indicator appears in

the display (refer to Chapter

X6.1X) and an acoustic signal alerts you to this bank note.

5. Feed further bank notes into the device in the same way. The Count indicator displays the number of valid

bank notes controlled and the Value indicator displays the total value of validated bank notes (refer to

Chapter

X5.1.3X).

Note: The Value display is a six-digit display and can show a maximum value of Euro 999,999.

After you have controlled all the bank notes:

6. Press the Report/DIR button several times to display, in succession, how many bank notes have been

controlled for each individual denomination (5 Euro, 10 Euro, 20 Euro etc.) until now. The denomination

value appears in the display underneath VALUE. The number of bank notes is indicated in the Count

display (refer to Chapter

X5.1.3X). The total value of each denomination value appears in the Value display

(refer to Chapter X5.1.3X).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia NC 330 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia NC 330 Manual

Product: