Manual Olympia MBF 8181 (page 20 of 68) (English, German, Dutch, French, Italian, Spanish)

568996

Zoom out

Zoom in

1/68

Note:

Before using the parent unit for the rst time, charge NiMH battery with the rapid

charger for at least four hours. Be sure to switch o the unit before charging.

Caution: Before connecting the parent unit with the rapid charger:

1) Ensure that a rechargeable battery is installed. Otherwise, there is a risk of explosion.

2) Ensure that the battery is inserted in the unit correctly. Otherwise, the parent unit cannot

operate properly.

7. PAIRING

This process connects the receiver with the transmitter so that the units can communicate with

each other and no other devices (even a baby monitor of an identical model) can interfere with

the signal. On supply, the units are already paired with factory-preset code. However, we recom-

mend performing following steps for pairing again in order to achieve a higher level of privacy:

1. First press and hold the

button (14) on the parent unit.

2. Set the Power ON-OFF switch (15) to ON and wait until the temperature indicator (20) starts

ashing.

3. Now press and hold the

button (3) on the baby unit.

4. Set the Power ON-OFF switch (4) to ON and wait until the Tx indicator (8) starts ashing.

5. Release the

button (3) and then press and hold the () button (3) again.

6. If pairing is successful, the Tx indicator (8) and the

on the temperature indicator (20) should

stop ashing. At the same time, the parent unit will emit 2 beep sounds.

7. Switch both units o and on again; the baby monitor is now ready for operation.

8. In case the units cannot communicate with each other, repeat steps 1 - 7 again.

8. OPERATION

8.1 BABY UNIT (TRANSMITTER)

1. Set the Power ON-OFF switch (4) to ON. The power indicator (9) lights up yellow.

2. Place the unit about 1 m from the crib with the microphone (5) facing towards the baby.

3. Adjust the microphone sensitivity by using the UP/DOWN buttons (2) and (3) so that the unit

is set to transmit whenever the microphone (5) detects sounds above a certain noise level.

The transmission indicator (8) ashes each time these buttons are pressed. The more frequent

the ashes, the higher the sensitivity of the microphone to any noise (max. 4 blinks and min.1

ash). Press

to increase and to reduce microphone sensitivity.

4. Once the unit is in transmit mode, the transmit indicator (8) lights up yellow. The unit returns

to standby mode a few seconds after the microphone (5) stops picking up any sound and the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia MBF 8181 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia MBF 8181 Manual

Product: