Manual Olympia G 4410 (page 14 of 48) (English, German, Dutch, French, Italian, Spanish)

569193

Zoom out

Zoom in

1/48

2SHUDWLRQ



1. Place the guillotine on a stable, level base with the guillotine side fac-

ing up.

2. The guillotine arm is locked on the cutting unit.

Proceed as follows to unlock the guillotine arm:

 Press the arm lock downwards (Fig. 1/1).

 At the same time, pull the guillotine arm

towards you using the handle (Fig. 1/2).

 Move the guillotine arm upwards

(Fig. 1/3).

3. Adjust the aligning rail to the position you re-

quire (Fig. 2):

 Release the aligning rail's locking mecha-

nism by turning it to OPEN.

 Slide the aligning rail to the position neces-

sary.

 Turn the locking mechanism back to

CLOSE. There are two positions provided:

turn to the right or to the left.

4. Proceed as follows to make a cut:

 Move the guillotine arm upwards.

 Slide the material to be cut under the press-

ing rail and align it to the aligning marks on

the base. Slide it against the aligning rail, if

necessary.

 Press down with one hand on the pressing

rail to clamp the material to be cut

(Fig. 3/1).

 Use the other hand to move the guillotine

arm down and cut the material (Fig. 3/2).

)LJ

)LJ

)LJ

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia G 4410 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia G 4410 Manual

Product: