569310
22
Zoom out
Zoom in
Previous page
1/32
Next page
22
BInstallation
6 Remove the machine carefully from the packaging.
7 Position the metal frame (1) on a solid base near a power socket.
Ensure that the machine (2) is fitted properly on the metal frame (1).
8 Open the cover (3) of the paper feed (4). Insert the tabs (5) of the
paper feed support (6) in the openings (7) provided for them in the
paper feed (4).
9 Now assemble the folding plates (8).
Note: There are two basic settings available for selection according to
the respective arrangements of the folding plates (8). Please pay
attention to sections 3-1 and 3-2.
3-1 Assembling the folding plates (8) for double fold, fanfold and Z fold.
3-1-1 Slide the front folding plate (#1 fold plate) (8.1), with the open side at
the front, along the guide line label provided as far as possible in the
machine (2).
3-1-2 Fix the folding plate (8.1) in place by allowing it to engage on the pins
provided.
Note: When positioning the folding plate (8), pay attention that, after
insertion, it is parallel to the label (#1 fold plate).
3-1-3 Slide the rear folding plate (#2 fold plate) (8.2), with the open side at
the front, along the guide line label provided as far as possible in the
machine (2).
3-1-4 Fix the folding plate (8.2) in place by allowing it to engage on the pins
provided.
Note: When positioning the folding plate (8.2), pay attention that it is
parallel to the label (#2 fold plate), after insertion.
3-2 Assembling the folding plates (8) for single folds.
3-1-2 Slide the front folding plate (#1 fold plate) (8.1), with the open side at
the front, along the guide line label provided as far as possible in the
machine (2).
3-2-2 Fix the folding plate (8.1) in place by allowing it to engage on the pins
provided.
Note: When positioning the folding plate (8), pay attention that it is
parallel to the label (#1 fold plate) after insertion.
3-2-3 Slide the rear folding plate (#2 fold plate) (8.2), with the closed side at
the front, along the guide line label provided as far as possible in the
machine (2).
3-2-4 Fix the folding plate (8.2) in place by allowing it to engage on the pins
provided.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia FM 4420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia FM 4420 in the language / languages: English, German as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info