Manual Olympia ECS 625.4 CCD (page 19 of 100) (English, German, Dutch, French, Italian, Portuguese, Spanish)

569040

Zoom out

Zoom in

1/100

4 Starting Up

1. Remove the device carefully from the packaging.

Attention: The underside of the cutting mechanism attachment has sharp edges. Risk

of injury!

2. Place the device on a level surface.

3. Position the device near a power socket. However, do not position it near a source of

heat or water.

4. Insert the waste bin.

Note: The shredder only operates when the original waste bin is inserted cor-

rectly.

5. Set the On/Off switch to its OFF position.

6. Connect the power plug to a power socket.

Note: Pay attention that the power cable is laid so that people or pets do not walk

over it or that other objects can be set down on it. Pay attention to the in-

formation regarding power supply on the rear side of the device for the

necessary precautions.

Safety information: For reasons of safety, the power socket to which the

shredder power plug is connected must be near to the

device and freely accessible so that the power supply can be

disconnected quickly in an emergency!

5 Operation

Note: The recommended capacities stipulated in Chapter "Technical Data" must

not be exceeded, otherwise material will jam! Do not forget that the thick-

ness of the paper increases when folded, as a result of which the recom-

mended sheet capacity can be exceeded. Also reduce the quantity of pa-

per when shredding coarse paper.

5.1 Switching the device on

● Set the On/Off switch to its ON position.

The green “power on” lamp lights up.

The device is ready to operate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia ECS 625.4 CCD in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia ECS 625.4 CCD Manual

Product: