569229
6
Zoom out
Zoom in
Previous page
1/37
Next page
Page 6 Operating Instructions ECR 650F-652F
1.7 Manager system
The system enables the assignment of two manager PASSWORDS. This results in access being restricted for:
1. The functions with the key in position "Z“ (reports with subsequent deletion)
2. The functions with the key in position "S/PRG" (programming)
A password is composed of four characters and the log in process is analogue to that described above. In addition, PRG
Mode can be used to restrict the following clerk rights:
Restriction of transactions in X mode
Restriction of transactions in Z mode
Restriction of "P/O" transactions
Restriction of "RETURN" transactions
Restriction of "VOID" transactions
Restriction of "NO SALE" transactions
2 Reset System, Machine Initialization
2.1 System reset
All data which has been programmed, stored in the memory, etc. is deleted!!!! The status is displayed on the cash
register display by the character sequence "CL". Following this operation, the entire system is initialised, including
S Mode (refer to “Procedure for resetting the system”). The system reset is performed on changing the EPROM memory
during the initial installation, if necessary, or activated when the cash register does not respond to a warm start.
Procedure for resetting the system:
Turn the key to "OFF".
Switch the 220 V mains power supply off from the cash register, press and hold the
FEED key
and, while doing so, switch the 220 V power supply to the cash register back on.
The following appear in the display SYSTEM RESET
WARM START
CONTINUE
Release the
FEED key.
Turn the control key to PRG and then use the arrow buttons to select SYSTEM RESET in the display.
Press
CASH: The cash register executes a RESET and indicates Programming Mode in the display.
Cancelling the SYSTEM RESET: Use the arrow keys to move to CONTINUE and press
CASH.
If the cash register becomes blocked (due to a paper jam, maloperation, etc.), proceed as follows:
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia ECR 650F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia ECR 650F in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympia ECR 650F

Olympia ECR 650F User Manual - English - 71 pages

Olympia ECR 650F User Manual - German - 76 pages

Olympia ECR 650F User Manual - German - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info