569204
7
Zoom out
Zoom in
Previous page
1/31
Next page
Olympia CM 1840 Operating Instructions Page 7
____
2 Reset System, Machine Initialization
2.1 System reset
All data which has been programmed, stored in the memory, etc. is deleted!!!! The status is displayed on the cash
register display by the character sequence "CL". Following this operation, the entire system is initialised, including
S Mode (refer to “Procedure for resetting the system”). The system reset is performed on changing the EPROM memory
during the initial installation, if necessary, or activated when the cash register does not respond to a warm start.
Procedure for resetting the system:
Turn the key to "OFF".
Switch the 220 V mains power supply off from the cash register, press and hold the
FEED key
and, while doing so, switch the 220 V power supply to the cash register back on.
The following appear in the display CONTINUE
Release the
FEED key.
Turn the control key to PRG and press
 SYSTEM RESET in the display.
Press
CASH: The cash register executes a RESET and indicates Programming Mode in the display.
Cancelling the SYSTEM RESET: Use the arrow keys to move to CONTINUE and press
CASH.
If the cash register becomes blocked (due to a paper jam, maloperation, etc.), proceed as follows:
2.2 Warm start
This cash register start up should only be performed when the following key combinations prove unsuccessful:
Following key positions "REG", "X", "Z", "PRG".
1.
CLR 
2. FEED
3. NS #
A warm start can be performed manually as follows:
1. According to the procedure for a warm start.
2. By pressing the "RESET“ button on the cash register's main board (left of the EPROM).
Procedure for a warm start:
Turn the control key to "OFF".
Switch off the 220 V mains power supply from the cash register.
Press and hold the
FEED key and, while doing so, switch the 220 V power supply for the cash register
back on.
The following appears in the display: CONTINUE
Release the
FEED key.
Turn the control key to REG and press
 to select WARM START.
Press
CASH. The warm start procedure is completed.
Cancelling the WARM START: Use the arrow keys to move to CONTINUE and press the CASH key.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia CM 1840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia CM 1840 in the language / languages: German as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympia CM 1840

Olympia CM 1840 User Manual - English - 59 pages

Olympia CM 1840 User Manual - English - 54 pages

Olympia CM 1840 User Manual - German - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info