Manual Olympia A 4040 (page 17 of 49) (English, German, Dutch, French, Italian, Spanish)

569130

Zoom out

Zoom in

1/49

Cleaning and Servicing

Deposits and residual adhesive on the transport rollers can influence the

results of the laminating process. Therefore, the transport rollers must be

cleaned periodically after use:

To do this, insert a folded piece of paper in the insertion slot. Residual

adhesive is removed and taken up by the paper when ejected. Repeat the

process several times.

Disconnect the power plug before starting to clean the unit with a damp

cloth. If necessary, the housing can be cleaned using a cloth moistened with

clean water with a little mild soap applied. Never use any solvents or

aggressive cleaning agents.

Troubleshooting

Fault Corrective measures

• Red LED (POWER) does not light

• Unit does not respond

• Check that the power plug has

been properly connected to the

power socket.

• If the fault cannot be cleared,

contact our hotline.

• Foil jam • Check the foil pockets being used

are the correct size.

• Only use pouches of the size

specified.

• Ensure that the pouch has been

inserted correctly in the unit.

• To clear the fault, follow the

instructions in the Section "Clearing

Foil Jams".

• Laminated foil is not completely

transparent

• Laminate the same foil again to

improve the lamination result.

Conformity of the equipment to the

EU directives is confirmed by the

CE symbol.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 4040 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia A 4040 Manual

Product: