569128

Olympia A 3048 Manual

19
Zoom out
Zoom in
Previous page
1/62
Next page
19
Hot Laminating
1. Connect the power cable to an easily accessible, standard electrical
socket.
Attention: Check that the voltage specifications of the machine corre-
spond to that of your power supply network
(220-240 V / 50 Hz).
2. Switch on the power switch on the rear side of the device.
3. Press the On/Off button on the operating panel to switch the device on.
The drive motor for the transport rollers starts up.
4. Select the foil thickness: Press the button for selecting cold/hot laminat-
ing and foil thickness, several times if necessary, until the LED beside
the relevant foil thickness lights up in the operating panel. The LED strip
flashes red during the warm-up phase (approx. 4-10 minutes). The LED
strip lights up blue continually when the correct temperature is reached
and the device is ready for use.
Attention: If you have laminated larger foil thicknesses at higher tem-
peratures beforehand, you must let the laminator cool down.
The cool down phase can take up to 30 minutes. The LED
strip flashes red during the cool down phase.
5. Insert the document to be laminated in the foil pocket so that there is a
margin of approx. 3-5 mm to the edge of the foil on all sides.
Attention: Only use hot laminating foils!
Attention: Observe the permissible foil thicknesses (refer to Features)!
6. Insert the foil pocket containing the document in the laminator's infeed
slot. Insert the ready closed side of the foil in first. The foil pocket, with
the document inside, is automatically drawn in and sealed.
Note: To prevent the foil pocket from creasing, never feed the
open side of the laminating pocket first in the infeed slot of
the laminator.
Attention: The foil is very hot and soft when ejected following lamina-
tion. Therefore, handle the laminated product with extreme
care.
Note: To flatten the laminated product, place a book or similar
heavy, flat object, on it.
Note: If the device remains unused for 30 minutes, it switches off
automatically. Press the On/Off button on the operating
panel to switch the device on again.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia A 3048 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 3048 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info