492914
15
Zoom out
Zoom in
Previous page
1/28
Next page
6. Telephoning
OPERATING
INSTRUCTIONS
11Page
Changing the Loudspeaker Volume
Press the Ä button while the loudspeaker is switched on in order to
adjust the volume. There are 4 levels available for selection.
Compiling the Call Time
Compiling of the call time is started approx. 5 seconds after the call has
been taken or the phone number dialled. Even if the phone number dialled
is engaged, the phone number and duration of the call are stored in the
outgoing call memory.
Muting the Microphone
While a call is in progress, you can press the È/Ç button to switch off the
microphone. Press the button again to resume the call.
Using the R Button
If your telephone is connected to a PABX system, the R button is used
during a call to enable consultation with other subscribers and/or to forward
a call to them.
This function is also used by network operators to provide customers with
various other services. For details, contact your telephone network
operator.
1. Pick up the receiver or press the < button to make the call.
2. During the call, press the R button and dial the phone number of another
subscriber in order to consult with him or forward the call to him.
3. Press the R button in order to take the initial call back following
consultation
or
4. Replace the receiver to forward the call to the subscriber contacted.
Tip: The above information could vary according to the PABX system
used. Please read the information provided in the manuals
supplied with your PABX system.
Entering a Dialling Pause (É)
If the telephone is connected to a PABX, it may be necessary to enter a
dialling pause. Press the É button after entering the digit following which a
pause is required, e.g. 0 for an outside line (0P....). A É then appears in the
display to represent the pause. A pause can also be programmed for
entries in the phone book.
Dialling Phone Numbers from the List of Incoming
Calls
The telephone automatically saves information on the last 44 incoming
calls. Proceed as follows to dial a phone number from this call list:
1. Press the _ or ` button to open the call list.
2. Press the _/` buttons to select a phone number.
3. Pick up the receiver or press the < button to dial the number.
Tip: If a call from the same phone number is received several times,
only the last call and time is displayed.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia 4210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia 4210 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympia 4210

Olympia 4210 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info