707624
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
Combustion air slide valve
Operating lever for combustion air supply
Operating lever on „0“:
all slide valves closed
Operating lever on „I“:
Secondary slide valve completely open /
Primary air slide valve completely closed
Operating lever on „II“:
Secondary slide valve completely open /
Primary air slide valve completely open
Regulation of combustion air
Position of operating lever:
„II” ..Ignition position, max. heat output
“I” - “II” ..Nominal heat output with lignite briquettes
„I“ ...Nominal heat output with billet wood
„I“ ...Nominal heat output with wood briquettes
„0“ ..Obtain glow
As the secondary air also contributes to the cleanli-
ness of the glass pane, the operating lever should be
set on “I” minimum. This also applies in the event of
low-load operation.
When not operating the lever should be set on “0”, to
reduce the cooling down of the room.
Fire grate
Operating lever for the re grate
With the help of the operating lever the re grate can
be opened or closed to move the ash from the com-
bustion chamber to the ash pan by pushing the re
grate back and forth.
Primary air can only enter the combustion chamber
if the re grate is set on open position.
Heating
Only place the quantity of fuel required to achieve
the heating requirement.
For a nominal heating output 5 kW:
- max. 1,5 kg billet wood
- max. 1,3 kg wood briquettes
- max. 2 lignite briquettes
For max. heat output allowed:
- max. 3 kg billet wood
- max. 3 kg wood briquettes
- max. 4 lignite briquettes
Open the combustion chamber door slowly after
adding new fuel, as otherwise the combustion gas-
es can escape.
Empty the ash pan or combustion chamber in good
time. Otherwise it is possible for the combustion air
intake to be blocked or for the grate to be damaged.
Only remove the ash pan to empty it.
Clean the ash pan compartment regularly after re-
moving the ash pan to remove any ash that may
have been spilled (e.g. use a vacuum cleaner).
Attention: Any stove and ash residues must have
been left to cool before being removed.
Heating during the transition period
Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
depends on the external temperature. Therefore, if the
external temperatures are high (above 16°C) the deliv-
ery pressure can be disrupted.
What to do?
Open the combustion air slide valve complete.
Only put on a small quantity of fuel.
Frequently stoke the ash.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg Turia Lina Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Turia Lina Compact in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info