Manual Olsberg Turia Lina Compact (page 14 of 44) (English, German, Dutch, French, Spanish)

707624

Zoom out

Zoom in

1/44

Installation of the stove

The installation wall must be level. The stove must only

be mounted on walls with sufcient load-bearing ca-

pacity.

Attention: Mounting the stove directly on the modu-

lar chimney block of the chimney system is prohibited.

You must ensure that the fastening material is suit-

able for the building material of the mounting wall.

For building materials that are commonly used, such

as vertical coring brick or solid brick, we recommend

the following fastening system, for example, from the

company, Fischer:

– Injection anchor sleeves – plastic FIS H 16x85 K

– Anchor rod FIS A M10x110

– Injection mortar FIS V

Because the wall temperature can be as high as 85°C,

you must ensure that the fastening system is perma-

nently suitable for this temperature.

The permanent fastening of the device on the mounting

wall, is solely the responsibility of the specialised exe-

cuting company.

If the oor or carpet is ammable a stable, heat-re-

sistant spark protection plate must be used. This spark

protection plate must project beyond the combustion

chamber opening of the stove, 50 cm to the front and

30 cm to the side.

Installation sequence

Because the cover hood must be dismounted for instal-

lation of the side cladding and the OEC (instructions

are included in the respective packaging units), and for

changing the connection of the connection duct, the

cover hood should only be remounted after all attach-

ment parts are attached.

● The wall bracket is delivered mounted on the stove.

For mounting on the wall dismount the wall bracket

from the device. To do this, unscrew the 4 M12 fas-

tening nuts and pull the wall bracket out of the device

from the rear (see Fig. 5).

● Unscrew cover hood front and rear and take it off

(see Fig. 2 – 4).

● The connection of the stove pipe Ø 150 mm can be

executed either on top or on the rear. The device is

delivered pre-assembled for the top connection. For

this, break the cover on top out of the cover hood.

If it should be connected at the rear, then it must re-

mounted in the following steps:

– Completely break out or saw out the rear cover

from the cover hood. The support surface of the

cover hood must also be removed in this area.

– The connection duct Ø 150 mm, 140 mm long for

connection at the rear is in the combustion cham-

ber.

– Swap the sealing cover on the heating gas dome

from rear to top.

● Prepare the wall bracket for the rear stove pipe con-

nection as follows:

– Detach the thermal insulation in the area of the

cover for the rear wall connection from the brackets

Fig. 2

Fig. 3

Fig. 4

Sensor pocket

for temperature

sensor OEC

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Turia Lina Compact in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olsberg Turia Lina Compact Manual

Product: