Manual Olsberg Pular Plus Compact (page 16 of 36) (English, German, Dutch, French)

707629

Zoom out

Zoom in

1/36

Operation

Permissible fuels

The following fuels are approved:

● Natural shopped wood in the form of billet wood

Maximum length: .....................33 cm

Circumference: .......... approx. 30 cm

● Wood briquettes to DIN EN 14691

Size class HP 2

Maximum length: .....................20 cm

Billet wood reaches a moisture content of 10 to 15% after

being stored outdoors for 2 to 3 years (only covered at the

top) and is then ideally suited for heating.

Freshly cut wood has a very high moisture content and

so burns badly. Apart from the very low caloric value it is

also harmful for the environment. The increased conden-

sate and tar formation can lead to replace and chimney

sooting.

This diagram shows that the consumption rate with fresh-

ly-felled wood (caloric value 2.3 kWh/kg) is almost twice

as high as the consumption rate with dry wood (caloric

value 4.3 kWh/kg).

Moisture [%]

dry wood that has been stored for at least 2 years

Caloric value [kWh/kg]

freshly-felled wood

You will only achieve optimum combustion and heat in

an environmentally friendly way with these fuels. Adding

the fuel in small quantities avoids unnecessary emissions.

Clean burning can be identied by the fact that the re-

brick becomes a light colour.

According to the German Federal Immission Control Act,

it is forbidden e.g. to burn the following fuels in stoves:

● Moist wood or wood treated with wood

preservatives

● Sawdust, chippings, grinding dust

● Bark and chipboard waste

● Slack coal

● Other wastes

● Paper and cardboard (except for igniting)

● Straw

Please note before heating for the rst time

● Remove all accessories from the ash pan and combus-

tion chamber.

● The odour given o by the evaporation of the protec-

tive coating disappears after the stove has been burn-

ing for several hours (ventilate the room well).

● The stove has a high quality temperature resistant coat,

which does not achieve its nal strength until the stove

has been heated for the rst time. You should therefore

never leave anything on the stove and not touch the

surfaces as the paint coat could otherwise be damaged.

● As soon as the kindling material has burned down, put

on 2 burnouts consisting of 3 kg wood ensuring that the

temperature resistant coating reaches its nal rmness.

Igniting

● Before ignition, check that no ammable objects are

placed on the stove.

● Empty the ash pan if necessary and slide back in.

● Open the combustion air slide valve complete.

● Grate in open position = operating lever pulled out

● Stack small amounts of rewood and, on top of it, kin-

dling material (igniter cubes and dry, smaller kindling)

and set the material alight.

● Close the door to the combustion chamber so that the

kindling material can catch re.

● Once there is a basic rebed, add more fuel according to

the heat requirement (see chapter “Heating”).

Caution:

When heating up the replace, diculties in igniting the

rewood can occur if a ue draught has not yet formed in

the chimney, and ventilation devices/systems are operat-

ed at the same time. In this case briey opening a window

in the installation room or temporarily switching o the

ventilation system can help.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Pular Plus Compact in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olsberg Pular Plus Compact Manual

Product: