707627
29
Zoom out
Zoom in
Previous page
1/72
Next page
29
Measure the length of the stove pipe and adjust the
pipe accordingly.
Unscrew the waste air duct from the appliance.
Slip the elbow pipe with the stove pipe onto the waste
air duct and slide it through the hole in the insulation
board and then tightly into the wall lining (see Fig.5).
Notice: Fit the waste air duct onto the appliance in
such a way that the slotted holes face in the
direction where the stove pipe is inserted into
the wall lining.
Re-tighten the waste air duct on the appliance.
Important: The stove pipe connections must be
sealed. The stove pipe must not project
into the chimney.
Fig.5
Important!
Before gluing together cladding panels 3+4 (Fig.6):
Place cladding panels 3+4 on a level surface in their
installation position and glue them together before
screwing them together using 2 chipboard screws
Ø5x60 (19).
Insert the air grille frame (10) into the cladding (4) from
the rear and x it in place using 4 chipboard screws
Ø4x20 (18).
Screw plaster frame bottom (11) to cladding boards 3+4
using 3 countersunk screws M5x35 (20), washers (21)
and hexagon screws M5 (22).
Position the pre-assembled cladding panels 3+4 on the
base plate, glue them together with insulation boards
1+2 and screw them together with 2 chipboard screws
Ø6x140 (17).
1
2
4 1719
18
3
17
10
11
22
21
20
4
1
4
2
3
Fig.6
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg Aracar Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Aracar Compact in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info