16724
47
Zoom out
Zoom in
Previous page
1/53
Next page
29
- Remove the print head and do the following opera-
tions:
check that there are no foreign bodies on the print
nozzles; if there are, remove them carefully, taking
care not to touch the electrical contacts;
clean the electrical contacts both on the print head
and on the print head carriage, see "To clean the
electrical contacts of the print head", below;
clean the nozzles as described in "To clean the
nozzles of the print head".
- Reinstall the print head.
- Call the engineering service.
T
O
CLEAN
THE
ELECTRICAL
CONTACTS
OF
THE
PRINT
HEAD
With the fax machine disconnected from the power socket:
1-2 Lift the print head compartment cover by putting your finger in the
notch at the centre as shown in the figure.
3. Release the print head by pressing the levers and then remove it
from its seat.
4. Clean the electrical contacts using a slightly damp cloth. Do not
touch the nozzles.
5. Clean the electrical contacts of the print head carriage with a slightly
damp cloth and then, having reinserted the print head, close the
print head compartment cover.
T
O
CLEAN
THE
NOZZLES
OF
THE
PRINT
HEAD
NOTE
This procedure is to be followed as a last resort, before
replacing the print head completely.
1. Damp a paper tissue with distilled water and then wring it out to
eliminate any surplus liquid.
2. Remove the print head as described in the previous procedure.
3. Holding the print head with the nozzles facing downwards, tap it
gently on the tissue as indicated in the figure.
4. Repeat the operation a few times, pressing the print head onto
different points of the tissue to clean the nozzles thoroughly.
5. Insert the print head as indicated previously in "To replace the
print head".
T
O
CLEAN
THE
PRINT
HEAD
PAD
With the fax machine disconnected from the power socket:
1-2 Lift the print head compartment cover by putting your finger in the
notch at the centre as shown in the figure.
3. Move the print head against the left-hand side as indicated in the
figure.
4. Clean the print head pad with a dry cotton swab and close the print
head compartment cover.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti OFX180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti OFX180 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti OFX180

Olivetti OFX180 User Manual - German - 53 pages

Olivetti OFX180 User Manual - Dutch - 53 pages

Olivetti OFX180 User Manual - Danish - 53 pages

Olivetti OFX180 User Manual - French - 53 pages

Olivetti OFX180 User Manual - Italian - 53 pages

Olivetti OFX180 User Manual - Portuguese - 53 pages

Olivetti OFX180 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info