16724
38
Zoom out
Zoom in
Previous page
1/53
Next page
20
Call the fax machine with the desired frequency so that the
fax machine detects it. The display shows:
RING DETECTED
To return the fax machine to the initial stand-by mode.
notE
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At
this point, press the
key and repeat the procedure.
TO CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for automatic reception
with recognition of the type of call, it behaves as fol-
lows:
if it is being called by a fax machine, it will automatically
prepare to receive a document after the preset number of
rings
if it is being called by a telephone, it will emit an acoustic
signal for a time of 20 seconds, after which, if you still have
not lifted the handset, it will automatically prepare to receive
a document.
If you want, you can change the length of the acoustic signal
as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
FAX/TEL TIMER:20
/ Press
|
/
}
to view the other available values: "15", "30" or
"40". For exemple: "40".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
TO CHANGE THE SILENCE LAPSE
This function is only enabled in some countries.
To change the silence lapse set on your fax machine, pro-
ceed as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
Until the display shows:
SILENCE LAPSE.: 6
/ Press
|
/
}
to view the other available values: "3", "4", "8",
"10" or "OFF". For exemple: "4".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
TO CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an emergency telephone
that operates in tone dialling mode and is set up for
manual reception or automatic reception with recog-
nition of the type of call, whenever there is a call from a
correspondent wishing to send you a document, you can
set it to receive the document by typing the code
* * on
the emergency telephone. This operation has the same
effect as pressing the
key on the fax machine.
You can replace the second "asterisk" of this code using
digits from 0 to 9.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SET-UP
The display shows:
PUBL.LINE (PSTN)
Until the display shows:
REMOTE START:ON
The display shows:
TYPE CODE
CODE (0/9,*) **
/ Type the new code, for example: "*8".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
note
If you are connected to a private line, follow the same proce-
dure until the display shows "PUBL.LINE (PSTN)", then press
the
|
/
}
keys to display: "PRIV.LINE (PBX)" and then con-
tinue as indicated in the procedure.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti OFX180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti OFX180 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti OFX180

Olivetti OFX180 User Manual - German - 53 pages

Olivetti OFX180 User Manual - Dutch - 53 pages

Olivetti OFX180 User Manual - Danish - 53 pages

Olivetti OFX180 User Manual - French - 53 pages

Olivetti OFX180 User Manual - Italian - 53 pages

Olivetti OFX180 User Manual - Portuguese - 53 pages

Olivetti OFX180 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info