424156
25
Zoom out
Zoom in
Previous page
1/150
Next page
18
PROGRAMMINGPROGRAMMING
Programming means adapting the fax machine to suit your needs. It consists in storing functions that will be
activated during use, to enable you to gain total automatic control of its operation.
This chapter describes the programming procedures available on your facsimile machine.
This chapter explains how to set the date and time, how to store the sender’s name and the type of heading
to be sent, how some fax functions can be controlled through operating configuration parameters and how to
store the fax numbers of your main correspondents so that you can subsequently dial them when required
simply by pressing one key (one-touch dialling) or a key and a code (coded speed dialling).
Note, however, that if you want to send and receive documents right away, all you have to do is insert the
document in the ADF (Automatic Document Feeder) and refer to the “Normal transmission” or “Manual
reception” sections of the “TRANSMISSION” and “RECEPTION” chapters, respectively.
Note: Any of the procedures described in this chapter can be interrupted at any time by pressing the STOP
key once or twice, depending on the procedure.
ACCESS TO PROGRAMMING PROCEDURES
The programming procedures may be accessed from three menus each containing a list of available functions:
- the “Storing datamenu Comprises the functions that enable you to set the date and time,
store the sender’s ID, headings, passwords and confidential polling
identifiers.
- the “Storing Fax/phone number menu Includes all the functions that enable you to program one-
touch dialling keys, speed dialling codes and program keys.
- the “Operating configuration menu Comprises the functions that enable you to personalize the
facsimile machine’s operating configuration parameters.
Note: Functions can be programmed independently without having to follow the order in which they are
presented in the manual.
Accessibility
Stand-by mode does not prevent access to the functions indicated in the table above.
When the functions are accessed from standby mode, the following messages will appear on the display:
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ofx 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ofx 3100 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info