424255
119
Zoom out
Zoom in
Previous page
1/130
Next page
104
6. Close the print head
compartment cover and lower
the operator console.
5. Push the print head in the
direction indicated by the arrow
until it clicks into place.
4. Insert the print head in its
compartment with the contacts
towards the front of the machine.
If the new print head is of the disposable type, the display shows the message:
NEW PRINT HEAD?
1=YES 0=NO
Confirm by pressing
1.
At this point, the facsimile machine performs the "Automatic Nozzle Cleaning and Testing
Procedure" (described below) and prints the result on the previously inserted sheet of paper.
AUTOMATIC NOZZLE CLEANING AND TESTING PROCEDURE
Having replaced the print head or ink cartridge, the facsimile machine automatically activates the
nozzle cleaning procedure. It then checks that they are working properly and prints the result on
the sheet inserted automatically after the out of ink message was displayed. The print test contains
a numbered scale and a set of graphics and text to enable the operator to assess the print quality
immediately.
At the end of the procedure, the display shows the message:
CHECK PRINTING QUALITY
1=EXIT 0=REPEAT
Check that there are
no gaps
in the numbered scale
and that there are
no horizontal white lines
in the black areas. If these conditions are respected, this means that the print head has been
correctly inserted and is in perfect working order, therefore press 1: the facsimile machine returns
to standby and is ready for use.
If there are
gaps or white lines
, but the print quality is considered sufficient, press 1, otherwise
press 0 to repeat the nozzle cleaning procedure: if the result of the subsequent test continues to
be unsatisfactory, repeat the procedure for the third and last time.
If the print quality is still unsatisfactory after three cleaning cycles, press 1 and carry out the
"Manual Nozzle Testing Procedure" described in the Routine Maintenance section. If this does not
work either, the print head is probably faulty. Replace it with a new one.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ofx 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ofx 2200 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info