424255
30
Zoom out
Zoom in
Previous page
1/130
Next page
17
GETTING STARTED
This section describes the facsimile's basic functions, that is, how to send and receive a fax and
how to redial a fax number manually (when the automatic redials carried out by the machine do
not succeed in establishing a connection with the desired correspondent). If you use the machine
as described here, remember that you are not using it to its full potential: we therefore recommend
you read the second part of the manual &
Getting the Best from Your Facsimile Machine
at the
earliest opportunity.
SENDING A FAX
I
The facsimile machine is switched on and in standby. The display shows the message
"AUTOMATIC RX". The procedure described in the "Setting the Installation Parameters"
section has been carried out
.
1. Place the document face down in the ADF and fit the paper guides against its left and right
edges.
The display shows the date, time and percentage of free memory on the top line and the
message "DOCUMENT INSERTED" on the bottom line.
DD/MM 'YY HH:MM %nnn
DOCUMENT INSERTED
2. Press DIAL, dial the correspondent's fax number on the numeric keypad and press START.
The facsimile machine starts to store the document (the percentage of free memory
decreases). It then activates transmission (the TX/RX LED lights up and the display shows
the status of the connection) and at the end of transmission, if no errors have been found, it
displays the message "TRANSMISSION COMPLETED" (the TX/RX LED goes off) and
returns to standby. You can also check that transmission was successful by looking at the
percentage of free memory, which returns to the maximum value available.
REDIALLING MANUALLY
I
An error was detected on the telephone line while you were attempting to establish a
connection. Having signalled this situation, the facsimile machine returns to standby
.
1. Place the document on the ADF again.
2. Press REDIAL and then press START.
The facsimile machine retries to send the document.
RECEIVING A FAX
I
The facsimile machine is switched on and in standby. The display shows the message
"AUTOMATIC RX". The procedure described in the "Setting the Installation Parameters"
section has been carried out
.
1. The telephone rings and the facsimile automatically activates fax reception (the TX/RX LED
lights up and the display indicates the status of the connection).
2. When reception has been completed successfully, the facsimile machine emits a beep (the
TX/RX LED goes off).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ofx 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ofx 2200 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info