424157
119
Zoom out
Zoom in
Previous page
1/127
Next page
109
SIGNALS AND SERVICE CODES
MESSAGES ON THE DISPLAY
MESSAGE SOLUTION
TOP OPEN Close the lid of the operator console.
REM. DOCUMENT Remove the document and replace it correctly in
the feed slot.
NO INK With a disposable print head, replace the head.
With a print head with an interchangeable ink cartridge,
replace the cartridge.
If the message persists, replace the print head. See the
"MAINTENANCE" chapter.
CHECK PAPER Add paper to the cassette and check the position of
the paper positioning lever.
NO HEAD Insert the print cartridge. If the message appears even
when the cartridge is present in the facsimile machine, it
has proprobably been inserted incorrectly. In this case,
remove and reinsert the cartridge.
If the message persists, clean the electrical contacts (see
the “Cleaning the electrical contacts” section of the
“MAINTENANCE” chapter.
HEAD NEW? This message appears on the display after the print
YES = CONF. NO = CLEAR cartridge has been inserted. If the cartridge is new, select
YES by pressing SET/CONF. ; if it is not, select NO by
pressing CLEAR.
WARNING: If you select YES and the cartridge is not
new, the no ink left status will not be detected.
CHECK NOZZLES Follow the print head nozzle purging procedure.
Should faults be found, act according to the diagnostic
result printed (see the “Checking the print head nozzles”
section of the “MAINTENANCE” chapter).
If the message persists, replace the print cartridge.
HANDSET OFF HOOK Place the handset on the hook.
OPERATION INTERR This message appears on the display for a few seconds
when you interrupt a procedure in progress.
NO DOCUMENT Insert the document in the ADF.
DIAGNOSTIC ON When powered on, the facsimile machine runs a short
test on its components and then gets ready for operation.
At the end of the procedure, check that the facsimile
machine is in stand-by.
cap16.p65 13/04/00, 23.07109
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ofx 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ofx 2100 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info